19 jobs found in Marietta

Description: We are Lockheed Martin You will be a C-130J Production/Training Pilot for the C-130 Flight Operations team. Our team is responsible for conducting acceptance check flights of newly assembled C-130J aircraft. We are where the “Rubber meets the Road” for all new C-130J aircraft and capabilities coming out of our Marietta plant. What You Will Be Doing As the Production/Training Pilot your responsibilities will include: • Pilot C-130J aircraft during production acceptance and functional check flights • Pilot C-130J aircraft on delivery and ferry flights • Pilot C-130J aircraft for engineering and experimental test flights to validate and verify compliance with FARs and military specifications, determine operational suitability, and conduct developmental test • Perform as a C-130J instructor pilot for company and customer pilots and aircrew during syllabus training flights • Provide classroom, simulator, and flight instruction for company and customer aircrew •...

Description: You will be the Navigation Engineer – Level 2 for the AMMM Communications, Navigation, and Sensors Team which is responsible for delivering cutting‑edge RF solutions that power our aircraft’s communications, navigation, and sensor capabilities. What You Will Be Doing As the Navigation Engineer you will be responsible for driving the design, analysis, and integration of navigation systems—including embedded GPS/INS and flight‑management systems—to enable high‑performance mission outcomes. You will partner with cross‑functional teams to turn requirements into reliable, field‑ready solutions. Your responsibilities will include: Perform engineering impact analyses of navigation systems and their dependents. Support the design, test, and integration of flight‑management systems, embedded GPS/INS, and related hardware. Collaborate with system and software teams to translate requirements into RF‑specific solutions. Generate technical...

Description: You will be the Training Development Engineer (SA/IT Systems) Level 4 for the Skunk Works® MDCX Autonomy Platform which is responsible for developing and delivering technical training on networking, systems administration, and IT infrastructure. What You Will Be Doing As the Training Development Engineer (SA/IT Systems) Level 4 you will be responsible for translating complex system behavior into practical, usable training for operators and maintainers. You will design, create, and deliver high‑impact curriculum that empowers teams to operate the MDCX autonomy platform with confidence. Your responsibilities will include: Develop and maintain technical training materials for networking hardware, software, and SA/IT systems. Translate system documentation, engineering data, and requirements into clear, actionable training content. Deliver instructor‑led training to engineers, operators, and maintainers. Create multimedia courseware,...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) which is responsible for delivering cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for applying deep technical expertise to solve complex wiring and power‑distribution challenges while partnering closely with systems, mechanical, structural, and integration teams. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power‑distribution systems. Translate electrical specifications into clear routing diagrams, cable layouts, and detailed installation procedures, coordinating with cross‑functional teams. Create and maintain comprehensive wiring‑harness documentation, support prototype builds, troubleshoot integration issues, and manage change requests. Develop supplier statements of work and oversee system check‑outs to...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin Aeronautics is seeking a full-time Early Career Cyber Systems Security Engineer. In this role, you will preform system administrative duties for both Linux and Windows and work with Risk Management Framework tooling. The successful...

Description: We are Lockheed Martin We are seeking a highly experienced Principal Project Engineer to lead and manage C130 new development and modernization efforts. You will function as part of the AMMM Project Engineering team responsible for delivering complex system development products and solutions. What You Will Be Doing As a Principal Project Engineer Manager your responsibilities will include: • Be the technical leader solving new development opportunities or modernized solutions of an integrated and complex system/technical development from concept, through design, implementation, test, manufacturing/deployment and sustainment. • Ensure alignment with Engineering and Technology strategy, business development, program architect, technical feasibility. • Drive planning, technical performance measures, trade studies, risk evaluations, across all Engineering Teams to meet contract cost, schedule, and technical requirements. Lead and manage engineering teams to...

Description: You will be the Utilities & Mechanical Systems Engineer - Level 4 for the Utility Systems – Vehicle Systems team which is responsible for designing, improving, and sustaining utility and fluid systems on AMMM aircraft such as the C‑130 and C‑5. What You Will Be Doing As the Utilities & Mechanical Systems Engineer - Level 4 you will be responsible for delivering high‑impact mechanical and fluid‑system solutions that keep our transport aircraft mission‑ready. Your responsibilities will include: Design, analyze, and refine mechanical and fluid utility systems for C‑130 and C‑5 platforms. Provide troubleshooting, production support, and sustainment solutions for flight controls, landing gear, fuel, hydraulic, and related subsystems. Generate and update engineering drawings, specifications, and technical documentation. Conduct lab testing, investigate non‑conformances, and implement corrective actions. Coordinate with suppliers,...

Description: You will be the Utilities & Mechanical Systems Engineer - Level 3 for the Utility Systems – Vehicle Systems team which is responsible for designing, improving, and sustaining utility and fluid systems on AMMM aircraft such as the C‑130 and C‑5. What You Will Be Doing As the Utilities & Mechanical Systems Engineer - Level 3 you will be responsible for delivering high‑impact mechanical and fluid‑system solutions that keep our transport aircraft mission‑ready. Your responsibilities will include: Design, analyze, and refine mechanical and fluid utility systems for C‑130 and C‑5 platforms. Provide troubleshooting, production support, and sustainment solutions for flight controls, landing gear, fuel, hydraulic, and related subsystems. Generate and update engineering drawings, specifications, and technical documentation. Conduct lab testing, investigate non‑conformances, and implement corrective actions. Coordinate with suppliers,...

Description: You will be the Utilities & Mechanical Systems Engineer - Level 2 for the Utility Systems – Vehicle Systems team which is responsible for designing, improving, and sustaining utility and fluid systems on AMMM aircraft such as the C‑130 and C‑5. What You Will Be Doing As the Utilities & Mechanical Systems Engineer - Level 2 you will be responsible for delivering robust mechanical and fluid‑system solutions that keep our transport aircraft mission‑ready. Your responsibilities will include: Design, analyze, and refine mechanical and fluid utility systems for C‑130 and C‑5 platforms. Provide troubleshooting, production support, and sustainment solutions for flight controls, landing gear, fuel, hydraulic, and related subsystems. Generate and update engineering drawings, specifications, and technical documentation. Conduct lab testing, investigate non‑conformances, and implement corrective actions. Coordinate with suppliers,...

Description: We are Lockheed Martin This position will work in Quality Control in Marietta, GA, to support all aspects of the C-130J build cycle to include assembly, structural repairs on sub or major assemblies, and functional checks. • This position is responsible for ensuring QA policies, procedures, and practices are followed and executed correctly to company and regulatory standards • Initiates, reviews, analyzes, and reports on quality-related data/metrics from production, service, supplier, or process improvement activities and analyzes using statistical techniques • Interfaces as needed with manufacturing, engineering, customer, vendor, and subcontractor representatives to ensure process requirements are met • Facilitate customer presentations for Mandatory Government Inspections (MGI) and/or Safety of Flight activities (SOF) • Conduct surveillance audits for compliance to the C-130 Quality Management System • Responsible for developing and coordinating defect...

Description: You will be the Electrical Engineer Sr. Stf, Simulation for the Simulation Engineering team which is responsible for designing, developing, and testing hardware simulation components (avionic/network test racks, cockpits, audio/visual systems, etc.). What You Will Be Doing As the Electrical Engineer Sr. Stf, Simulation you will be responsible for designing, developing, and integrating hardware systems that enable laboratory testing across multiple aircraft programs. Your responsibilities will include: Design and develop electrical hardware solutions for ADP, C‑5, C‑130J, F‑35 and F‑22 test venues. Integrate hardware into simulation platforms and ensure compliance with design criteria. Collaborate with external customers to capture and translate laboratory product requirements. Perform testing, troubleshooting, and validation of hardware in lab environments. Document designs, analyses, and test results in accordance with engineering...

Description: We are Lockheed Martin You will be a C-130J Test Pilot for the C-130 Flight Operations team. Our team is responsible for conducting acceptance check flights of newly assembled C-130J aircraft and flight test of modified aircraft. We are where the “Rubber meets the Road” for all new C-130J aircraft and capabilities coming out of our Marietta plant. What You Will Be Doing As the Test Pilot your responsibilities will include: • Plan, develop, and execute experimental test flights on C-130J, C-5M, and other AMMM aircraft to verify airworthiness, determine performance capability, validate and verify spec compliance, and assess operational suitability • Conduct engineering ground and flight tests • Conduct production acceptance and functional check flights on new or modified aircraft • Pilot AMMM aircraft on delivery and ferry flights • Pilot AMMM aircraft on airshow demonstrations • Conduct demonstration flights with customers, government officials, or media...

Description: System Integration/Test Engineer - Level 4 At Lockheed Martin Aeronautics, we're taking innovation to the next level. From designing the most advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities for a technical career been so limitless. Lockheed Martin Aeronautics. Be More Than You Can Imagine. As a member of the Low Speed Wind Tunnel (LSWT) team within the Lockheed Martin Flight Sciences group in Marietta, GA, the selected candidate will provide electrical and instrumentation engineering support to our large scale, low speed wind tunnel facility. The candidates responsibilities will involve instrumentation, as well as development, operation, and maintenance of wind tunnel electro-mechanical systems. Other tasks may include support of wind tunnel test article installation, operation of wind tunnel data acquisition systems, and repair and maintenance activities. This is...

Description: You will be the Aeronautical Engineering Mgr for the Air Mobility & Maritime Mission Center Fuselage Design Program Functional Team (PFT) which is responsible for delivering high‑performance aircraft structures and system installations. What You Will Be Doing As the Aeronautical Engineering Mgr you will be responsible for leading the technical direction, budgetary control, and schedule execution of all structural design and system‑integration activities within the team. You will partner with Business Development, ADP I&D, and production operations to turn concepts into validated solutions. Your responsibilities will include: Direct structural design and system installation across all active programs. Oversee technical, budgetary, and schedule aspects of design studies, corrective‑action investigations, and production support. Coordinate proposal and ECP activities, delivering accurate quotes and supporting new‑business pursuits....

Description: You will be the Design Engineer for the Air Mobility and Maritime Missions (AMMM) organization which is responsible for … What You Will Be Doing As the Design Engineer you will be responsible for translating engineering drawings and models into accurate, release‑ready data that supports the AMMM program’s schedule and quality goals. Your responsibilities will include: Perform verification of completeness of engineering technical data related to AMMM (C130, C5, P3) Build‑to‑Packages (BTPs). Evaluate the accuracy and releasability of AMMM engineering data against LM PM‑4052 and program design standards. Support engineering schedule release commitments, ensuring BTPs are accurate, complete, singular in interpretation, and usable by downstream teams. Collaborate in a fast‑paced team environment to meet critical schedule needs while maintaining high quality. What’s In It For You We are committed to supporting your work‑life balance and...

Description: You will be the RF Engineer – Level 2 for the AMMM Communications, Navigation, and Sensors Team which is responsible for delivering cutting‑edge RF solutions that power our aircraft’s communications, navigation, and sensor capabilities. What You Will Be Doing As the RF Engineer – Level 2 you will be responsible for driving the design, analysis, and integration of RF systems that enable high‑performance mission outcomes. You will work closely with cross‑functional teams to translate requirements into robust, field‑ready solutions. Your responsibilities will include: Perform RF engineering analyses, including antenna performance, link budgets, and interference mitigation. Support the design, test, and integration of radios, antennas, and related hardware. Collaborate with system and software teams to translate requirements into RF‑specific solutions. Generate technical documentation and reports for design reviews and certification....

Description: You will be the Electronics Engineer - Level 3 for the Skunk Works Communication, Navigation, and Sensor Systems team which is responsible for delivering advanced avionics subsystems that enable next‑generation aircraft performance. What You Will Be Doing As the Electronics Engineer - Level 3 you will be responsible for driving electronics engineering activities that support subsystem design, development, and integration across communications, computing, and test equipment platforms. Your responsibilities will include: Develop and validate electronic schematics, PCB layouts, and harnesses for avionics subsystems. Execute hardware‑in‑the‑loop and bench testing to verify performance against system requirements. Collaborate with cross‑functional teams to integrate electronics into larger system architectures using Model‑Based System Engineering practices. Generate technical documentation, including design reviews, test plans, and compliance...

Description: You will be the System Safety Engineer for the AMMM System Safety Team which is responsible for assessing and influencing system development to meet prescribed safety objectives. What You Will Be Doing As the System Safety Engineer you will be responsible for ensuring safety requirements are integrated throughout the product lifecycle, influencing design decisions, and validating safety performance. Your responsibilities will include: Conduct safety analyses and hazard assessments for new and existing systems. Develop and maintain safety documentation, including safety cases and mitigation plans. Collaborate with engineering, program, and certification teams to embed safety controls. Provide technical safety guidance and review across development stages. Support safety verification and validation testing activities. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible...