14 manufacturing engineering jobs found in Marietta

Description: We are Lockheed Martin This position will work in Quality Control in Marietta, GA, to support all aspects of the C-130J build cycle to include assembly, structural repairs on sub or major assemblies, and functional checks. • This position is responsible for ensuring QA policies, procedures, and practices are followed and executed correctly to company and regulatory standards • Initiates, reviews, analyzes, and reports on quality-related data/metrics from production, service, supplier, or process improvement activities and analyzes using statistical techniques • Interfaces as needed with manufacturing, engineering, customer, vendor, and subcontractor representatives to ensure process requirements are met • Facilitate customer presentations for Mandatory Government Inspections (MGI) and/or Safety of Flight activities (SOF) • Conduct surveillance audits for compliance to the C-130 Quality Management System • Responsible for developing and coordinating defect...

Description: You will be the Chief Manufacturing Engineer - Producibility Owner - Level 6 for the Production Engineering team which is responsible for establishing and advancing producibility across the AMMM portfolio. What You Will Be Doing As the Chief Manufacturing Engineer - Producibility Owner - Level 6 you will be responsible for defining the Producibility Program, guiding design‑for‑manufacturability, and leading change‑control activities that enable high‑rate production. Your responsibilities will include: Establish and drive the Producibility Program, integrating shaping, deployment, and design‑for‑manufacturability with Design and Quality Engineering. Lead the Manufacturing Change Control Board (MCCB) as chair, overseeing configuration control and change‑management for all tooling and process updates. Partner with OpsTech to identify and implement technology‑integration opportunities that enhance producibility. Serve as the primary liaison...

Description: You will be the Chief Tool Engineer - Digitization Owner - Level 6 for the Production Engineering team which is responsible for advancing tool‑digitization and innovative tooling solutions across the AMMM portfolio. What You Will Be Doing As the Chief Tool Engineer - Digitization Owner - Level 6 you will be responsible for leading tool‑digitization initiatives, driving cost‑effective tooling designs, and coordinating cross‑functional teams to ensure production success. Your responsibilities will include: Serve as the Tool Digitization Owner, establishing strategy and overseeing implementation across Production Engineering. Lead development of innovative tooling solutions that reduce span, cost, and cycle time while applying cutting‑edge design principles. Chair the Manufacturing Change Control Board (MCCB) and manage configuration control for all tooling assets. Partner with the Chief Manufacturing Engineer to integrate tool design into...

Description: What You Will Be Doing - Coordinate with Sourcing, Operations, Design Engineering, the Supply Base and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products. - Analyze technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability. - Investigate and recommend potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance. - Facilitate technical trade-offs and standardization that may lead to more economical procurement. - Recommend design changes to mitigate production issues. - Lead teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability. Further Information About This Opportunity Domestic travel on an as needed basis to supplier facilities in the...

Description: Lockheed Martin Aeronautics Company, home of the world-renowned Skunk Works®, turns visionary aircraft into reality and is known for building the finest military aircraft in the world. This recognition is continually earned through our commitment to relentless research and development of high-performance aircraft, continuously seeking innovative, low-cost design and manufacturing strategies, and delivering operational readiness for our customers' missions to ensure continued relevancy for the life cycle of our products. In this role, you will immediately impact the business with your ingenuity, creativity, and ideas that will be the catalyst for future business. If you are craving an opportunity where you are invited to be passionate, push the envelope, and think outside of the box, this opportunity with our Skunk Works may be just for you. We ensure those we serve always stay ahead of ready. As a Manufacturing Engineer in Skunk Works®, you will play a critical role...

Description: You will be the Aeronautical Engineer - MRB for the Engineering Team which is responsible for... What You Will Be Doing As the Aeronautical Engineer - MRB you will be responsible for overseeing the timely and economical disposition of non‑conforming parts and hardware, ensuring minimal impact on operations and delivery schedules. Your responsibilities will include: Recognize pertinent design factors relating to structural analysis, interchangeability, maintainability, effective use and operation, and other contractual specification requirements. Support aircraft production and provide rapid response in support of worldwide operations. Participate in anomaly investigation, technical solution development, and coordination with multiple support organizations and government customers. Provide awareness regarding errors related to released engineering and manufacturing Build‑to‑Packages. Hands‑on evaluation of non‑conformances on aircraft...

Description: You will be the Test Engineer Staff for the AMMM Functional Test Engineering Team in Marietta, GA, which is responsible for supporting multiple areas within manufacturing operations. What You Will Be Doing As the Test Engineer Staff, you will be responsible for designing, developing, operating, maintaining, and documenting software and firmware components and computing systems software to meet engineering and manufacturing requirements. Your responsibilities will include: Writing and revising C-130J aircraft system/component test procedures and providing on-aircraft testing and troubleshooting support. Developing test equipment and providing test equipment designs, as well as supporting Test Labs and Component testing within the Labs. Creating Labview, C++, & Visual Basic test programs for analyzing & validating the 1553 data bus systems. Developing and maintaining production planning (SFM, CAPPS, IMPACTS) and providing Functional...

Description: Supplier Quality Assurance Engineer This is a deployed position in the Marrietta, Georgia area. (Telecommuter remote work location to be reasonable driving distance to LM assigned suppliers as defined in agreement with manager). * The suppliers are located primarily in the in the state of Georgia and surrounding states. The selected candidate will be responsible for achieving total quality performance across multiple sites for strategic suppliers that produce major airframe and systems components. • Candidate needs working knowledge background in GD&T, Inspection methods, Tooling, AS9100, AS9102. working knowledge of Six Sigma, preventive tools PDCA, PFMEA, Mistake Proofing and Gap Analysis. • Must have knowledge and effectively apply root cause analysis, Cause Mapping, Cause & Effect diagrams, Pick Charts and, structured RCCA for effective corrective action. • Goals are to lead the supplier through the process of developing and executing plans that...

Description: You will be the Design Engineer for the BTP Structural Design Release team which is responsible for... What You Will Be Doing As the Design Engineer you will be responsible for managing the release process of structural design data, ensuring version control, validation, and timely delivery to downstream teams. Your responsibilities will include: Plan, coordinate, and execute the release of structural design packages (CAD models, drawings, BOMs, etc.). Apply configuration management processes to maintain baseline integrity of structural data. Conduct pre‑release verification and validation activities, generate release documentation, and ensure complete audit trails. Liaise with design, systems, manufacturing, and quality teams to resolve release blockers and provide technical guidance on PLM and CAD tools. Identify workflow bottlenecks and propose automation or procedural enhancements, contributing to release procedures and training...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: You will be the AMMM Liaison Planning Manager - Level 5 for the AMMM Production Engineering team which is responsible for aligning design engineering with production line demands and ensuring configuration‑controlled, cost‑effective build processes for the C‑130 fleet. What You Will Be Doing As the AMMM Liaison Planning Manager - Level 5 you will be responsible for leading a high‑performing planning organization that drives end‑to‑end manufacturing readiness. "Your responsibilities will include:" Lead day‑to‑day activities of the Liaison Manufacturing Planning Team, ensuring work instructions produce optimal builds and affordable systems. Develop and maintain forward‑looking performance measures, fostering a culture of readiness, process adherence, and complete staff work. Grow the team’s technical capabilities through gap assessments, mentoring, and knowledge transfer to meet current and future enterprise needs. Represent the organization...

Description: You will be the Material and Process Eng Snr for the Low Observable (LO) Materials team which is responsible for... What You Will Be Doing As the Material and Process Eng Snr you will be responsible for advancing low observable material technologies across multiple programs, driving research, development, and production readiness within the LO Materials team. Your responsibilities will include: Collaborate with engineers and technicians to design, develop, fabricate, and test low observable materials and systems. Develop and execute material development plans, process development, and test methods for thin films, polymers, composites, metals, and additively‑manufactured materials. Author material and process specifications, lab reports, and formal documentation of all work performed. Support manufacturing process development, scale‑up, and coordinate with external suppliers on technical issues. Perform life‑cycle analyses including...

Description: You will be the DMS Systems (DMS) Engineer Staff - Level 4 for the Diminishing Manufacturing Sources (DMS) Team, which is responsible for mitigating obsolescence issues on the C-130J Program. What You Will Be Doing As the DMS Systems (DMS) Engineer Staff - Level 4, you will be responsible for performing DMS Management duties, analyzing Bill of Material (BOM) and inventory management data to identify potential impacts to the C-130J Program, and developing DMS business cases to identify cost-affordable mitigation solutions. Your responsibilities will include: Performing DMS Management duties, including analysis of Bill of Material (BOM) and inventory management data. Developing DMS business cases to identify cost-affordable mitigation solutions for DMS events. Supporting proposal development efforts, including reviewing, interpreting, and writing proposals, SSOWs, and BOEs. Working on DMS redesign efforts to completion in support of...

Description: Applies quality principles in the areas of: design, incoming material, production control, product evaluation, program performance, reliability, inventory control, and/or research and development as they apply to product or process quality for make and/or buy products. Performs technical evaluations including product requirements, specifications, models/designs, drawings and procedures. Collaborates with program management, engineering, manufacturing, supply chain and customers on quality related issues to ensure quality standards are in place. Engages in product failure investigations, material review board decisions and corrective/preventive action. Ensures corrective measures meet acceptable reliability standards and/or are compliant with requirements. Develops strategies and systems designed to improve internal and/or supplier performance and productivity. Evaluates quality systems for deficiency identification and correction. Designs and analyzes inspection and...