78 integration test jobs found in Orlando

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: You will be a Systems Integration and Test Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems. What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns or upgrades to the existing missile...

Description: We are seeking a motivated Early Career Production Test Engineer to join our sensors team. This early-career position is ideal for engineers with 1 - 3 years of relevant experience who are passionate about test and integration. You will support the testing of printed circuit board assemblies (PCBAs / CCAs), electronic subsystems, and sensor pod level system testing, helping to maintain efficient production flows while learning best practices in test development and troubleshooting. In this hands-on role, you will work closely with production technicians, senior test engineers, design engineers, and quality teams to identify and resolve issues, improve test processes, and contribute to first-pass yield goals. What You Will Be Doing -Execute and monitor production test processes, including functional testing, boundary scan, environmental stress screening (ESS), and system level verification -Troubleshoot test failures at the board and system level using...

Description: You will be the Associate Manager for the Emulation Center of Excellence (ECoE) team, overseeing the development and implementation of emulation systems and leading a team of engineers. Our team is responsible for driving technical excellence and innovation in emulation systems, and we're looking for a seasoned technical leader to join our team. What You Will Be Doing As the Associate Manager, you will be responsible for technical leadership, overseeing the development and implementation of emulation systems, and collaborating with cross-functional teams to drive technical excellence and innovation. You will play a key role in ensuring the successful execution of ECoE projects, identifying areas for process improvement, and developing strategies to enhance team performance. Your responsibilities will include: • Overseeing the development and implementation of emulation systems • Leading a team of engineers and collaborating with cross-functional teams • Ensuring the...

Description: You will be a Hardware-in-the-Loop (HWIL) Engineer at Lockheed Martin, responsible for supporting the design, development, and implementation of real-time, closed-loop HWIL capabilities on multiple programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in overseeing the HWIL integration and testing process. What You Will Be Doing As a HWIL Engineer, you will be responsible for: • Overseeing the design, development, and implementation of real-time, closed-loop HWIL capabilities • Supporting program meetings, providing project status, and interfacing with a multi-discipline team • Designing, developing, and testing air vehicle software, firmware, and hardware, and integrating stimulation equipment into the HWIL facility • Debugging software, hardware, connectors, timing, and designs as part of the integration team • Integrating, testing, verifying, and validating the system and various subsystems • Using lab equipment to...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 2 Test Engineer within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) testbed devices for software and hardware development. We integrate new hardware configurations into PTD testbeds in Orlando to allow development engineers to verify and validate new capabilities for the deliverable...

Description: You will be the System Integration and Test Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the I&T Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Assessing verification approach to system requirements • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support integration efforts of new designs or design changes Why Join Us We're looking for a highly adaptable and motivated engineers to join our team. If you...

Description: What We're Doing At Lockheed Martin Rotary Mission Systems, we are at the forefront of innovation, working on exciting programs and developing cutting-edge products and applications to address the complex and evolving needs of our customers. Our team is dedicated to pushing the boundaries of technology and engineering excellence. The Work Lockheed Martin RMS is seeking talented engineers looking to utilize their hardware, software, and test skills by joining our Test Program Set Engineering team. Our team provides technical support for a number of aircraft and weapons systems to maximize operational readiness. Customers are both foreign and domestic and include branches of the US military. As a key member of our Test Program Set (TPS) Engineering Team, responsibilities will include: • Design TPS Hardware (Interface Test Adapters, Cables, Text Fixtures etc.) to interface required for testing hardware on automatic test stations. • Interpret electrical...

Description: Job Description : Lockheed Martin is seeking a Mechanical Engineer Associate in Orlando, FL. You will be the Mechanical Engineering Design supporting development and production of sensors and missile systems. What You Will Be Doing: As the Mechanical Engineering Designer Asc, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM * Coordinating with the IPT team, suppliers, GSC, electronic packaging, optics, and...

Description: You will be the ARRW Mechanical Design Engineer Staff for the Missiles & Fire Control – ARRW Program. Our team is developing the first hypersonic missile to enter low rate production. What You Will Be Doing As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design...

Description: We are seeking a motivated early-career engineer to join our test engineering team. In this role, you will develop, maintain, and execute automated test systems using National Instruments LabVIEW software to validate product performance, reliability, and quality. This position offers hands-on experience integrating hardware and software for data acquisition, functional testing, and automated test sequences in a production or R&D environment. Ideal for early career engineers with 1-3 years of experience who enjoy working at the intersection of electrical/hardware systems and software development. What You Will Be Doing - Design, develop, and debug LabVIEW programs for automated testing of electronic assemblies and sensors -Create virtual instruments (VIs) for data acquisition, signal processing, instrument control, and test sequencing -Interface LabVIEW with test hardware including NI DAQ devices, PCI chassis, cRIO, oscilloscopes, power supplies,...

Description: We are seeking a motivated early-career engineer to join our test engineering team. In this role, you will develop, maintain, and execute automated test systems using National Instruments LabVIEW software to validate product performance, reliability, and quality. This position offers hands-on experience integrating hardware and software for data acquisition, functional testing, and automated test sequences in a production or R&D environment. Ideal for early career engineers with 1-3 years of experience who enjoy working at the intersection of electrical/hardware systems and software development. What You Will Be Doing - Design, develop, and debug LabVIEW programs for automated testing of electronic assemblies and sensors -Create virtual instruments (VIs) for data acquisition, signal processing, instrument control, and test sequencing -Interface LabVIEW with test hardware including NI DAQ devices, PCI chassis, cRIO, oscilloscopes, power supplies,...

Description: We are seeking a motivated experienced engineer to join our test engineering team. In this role, you will develop, maintain, and execute automated test systems using National Instruments LabVIEW software to validate product performance, reliability, and quality. This position offers hands-on experience integrating hardware and software for data acquisition, functional testing, and automated test sequences in a production or R&D environment. Ideal for engineers with 3+ years of experience who enjoy working at the intersection of electrical/hardware systems and software development. What You Will Be Doing - Design, develop, and debug LabVIEW programs for automated testing of electronic assemblies and sensors -Create virtual instruments (VIs) for data acquisition, signal processing, instrument control, and test sequencing -Interface LabVIEW with test hardware including NI DAQ devices, PCI chassis, cRIO, oscilloscopes, power supplies, multimeters, and other...

Description: Lockheed Martin Missiles and Fire Control is looking for a Mechanical Engineering Design to support the development and production of a missile system. What You Will Be Doing: As a Mechanical Engineering Design Engineer, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM * Coordinating with the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design excellence...

Description: What We're Doing: At Lockheed Martin Rotary Mission Systems, we are at the forefront of innovation, working on exciting programs and developing cutting-edge products and applications to address the complex and evolving needs of our customers. Our team is dedicated to pushing the boundaries of technology and engineering excellence. Do you love solving challenging problems at the intersection of disciplines like Digital Hardware, Test Engineering and Software Development? If using your engineering skills to develop Automated Test Equipment to provide our Military and Aerospace customers technology is exciting to you then this role might be for you. The Work: As a key member of our Systems Engineering team, you will: • Design requirements, integration and testing for all phases of the product life cycle • Perform engineering obsolescence trade studies • Perform requirements analysis using DOORS NEXT • Ensure successful completion of milestones leading to the...

Description: You will be the Mechanical Design Engineer Sr for an Air Dominance development team. Our team is responsible for designing and producing key components of the missile system, including tactical and special test equipment hardware. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating with the IPT team, suppliers, GSC,...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Multi Domain Missile Warning Payload team. Our team creates large format, high frame rate imaging sensor systems that provide survivability enhancing situational awareness for air, space and surface platforms. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will work side by side with a PLD subject matter expert to architect, design and implement programmable logic solutions for the imaging sensor system. You will integrate hardware, develop test plans and verify performance on demanding space based platforms, contributing to a scalable, high performance missile warning payload. Your responsibilities will include: • Define architecture and design specifications for programmable logic components, develop and document RTL (VHDL/Verilog/SystemVerilog) gate level designs that meet performance, power, and reliability requirements. • Create synthesis, place and route, and timing...

Description: You will be a FPGA Design & Verification Engineer at Lockheed Martin, responsible for designing, simulating, and integrating Field-Programmable Gate Arrays (FPGAs). Our team is looking for a talented engineer to join our team and support the development of cutting-edge technologies. What You Will Be Doing As the FPGA Engineer you will perform requirements capture, design architecture, implementation, simulation, integration, and troubleshooting for the datalink FPGA designs that are being used to support a new capability. Your responsibilities will include: • Capturing and deriving requirements for FPGA designs • incorporate new crypto architecture leveraging existing NSA algorithms interfacing with data link radio module • RF waveform implementation and incorporation of Simulink/HDL Coder into FPGA design and low-speed messaging and communication with external peripherals • Working with Xilinx/AMD or Microchip FPGA to development solution for Complex...

Description: This position is for the Chief Engineer Manager – Cyber Security & Emerging Technologies (CSET) in the SP AP program area. The role reports to the SP AP Chief Engineer and leads a high impact, cross functional team delivering affordable, secure, future ready solutions in advanced cyber, electromagnetic (EM) warfare, 5G/6G radio frequency (RF), and micro electronics. The successful candidate will work closely with the entire Advanced Programs staff to ensure synergy across teams and to lead/participate in lessons learned communication What You Will Be Doing • Provide technical leadership for the CSET portfolio, setting direction, priorities, and performance targets. • Drive the capture and white paper process, translating emerging technology opportunities into competitive proposals that satisfy RFP requirements. • Own technical risk management, trade off analysis, and affordability metrics, establishing mitigation plans and continuous improvement indicators. •...

Description: You will be the Mechanical Engineering Design Sr for the Future Terminal Interceptor capability development team. Our team is responsible for developing key technologies to support the follow-on upper tier missile program to THAAD. The next generation missile system will play a critical role to our Warfighter's ability to defeat the growing complex threats. The vehicle will be enabled by the next generation seekers, controls, avionics, and communications subsystems. What You Will Be Doing: As the Mechanical Engineering Designer, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for...