18 software quality engineer jobs found in Orlando

Description: You will be the Software Quality Engineer (SSQE) for the Missiles and Fire Control (MFC) team. Our team is responsible for developing and maintaining high‑performance air and missile defense, air‑to‑air, precision fires, and other advanced systems for warfighting and civilian customers. What You Will Be Doing As the Software Quality Engineer (SSQE) you will be responsible for ensuring the reliability and performance of mission‑critical software through rigorous testing and quality processes. Your responsibilities will include, but are not limited to: Design, develop, and execute comprehensive test plans and test cases for software releases. Automate test procedures and frameworks to increase efficiency and coverage. Collaborate with developers, system engineers, and stakeholders to identify and resolve defects. Perform root‑cause analysis and drive corrective actions to improve product quality. Maintain documentation of test results,...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 2 Test Engineer within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) testbed devices for software and hardware development. We integrate new hardware configurations into PTD testbeds in Orlando to allow development engineers to verify and validate new capabilities for the deliverable...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK - Define and own system-level test and validation strategy across multiple programs, including coverage models, risk assessment, and release criteria - Architect scalable, efficient test solutions across hardware, software, and system integration layers - Lead cross-functional efforts with design, product, manufacturing, and quality teams to ensure...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the Hardware Engineer for the Air Dominance team within Missiles & Fire Control (MFC). Our team guarantees that every mechanical, electrical, and electronic packaging drawing, model, and specification meets rigorous standards, is production ready, and remains fully traceable in a configuration controlled environment. What You Will Be Doing As the Hardware Engineer you will serve as the independent authority that verifies the integrity, compliance, and manufacturability of all design deliverables for the Air Dominance program. Working closely with engineers, manufacturing, and quality partners, you’ll protect the program’s schedule and performance by catching issues early and championing best practice design standards. Your responsibilities will include: • Performing GD&T analysis and fit check reviews on PTC Creo/Windchill 3 D models and 2 D drawings. • Validating that designs comply with ASME standards, Lockheed Martin MFC Command Media, and...

Description: You will be the Hardware Engineer for the Air Dominance team within Missiles & Fire Control (MFC). Our team guarantees that every mechanical, electrical, and electronic packaging drawing, model, and specification meets rigorous standards, is production ready, and remains fully traceable in a configuration controlled environment. What You Will Be Doing As the Hardware Engineer you will serve as the independent authority that verifies the integrity, compliance, and manufacturability of all design deliverables for the Air Dominance program. Working closely with engineers, manufacturing, and quality partners, you’ll protect the program’s schedule and performance by catching issues early and championing best practice design standards. Your responsibilities will include: • Performing GD&T analysis and fit check reviews on PTC Creo/Windchill 3 D models and 2 D drawings. • Validating that designs comply with ASME standards, Lockheed Martin MFC Command Media, and...

Description: We are seeking a motivated early-career engineer to join our test engineering team. In this role, you will develop, maintain, and execute automated test systems using National Instruments LabVIEW software to validate product performance, reliability, and quality. This position offers hands-on experience integrating hardware and software for data acquisition, functional testing, and automated test sequences in a production or R&D environment. Ideal for early career engineers with 1-3 years of experience who enjoy working at the intersection of electrical/hardware systems and software development. What You Will Be Doing - Design, develop, and debug LabVIEW programs for automated testing of electronic assemblies and sensors -Create virtual instruments (VIs) for data acquisition, signal processing, instrument control, and test sequencing -Interface LabVIEW with test hardware including NI DAQ devices, PCI chassis, cRIO, oscilloscopes, power supplies,...

Description: We are seeking a motivated early-career engineer to join our test engineering team. In this role, you will develop, maintain, and execute automated test systems using National Instruments LabVIEW software to validate product performance, reliability, and quality. This position offers hands-on experience integrating hardware and software for data acquisition, functional testing, and automated test sequences in a production or R&D environment. Ideal for early career engineers with 1-3 years of experience who enjoy working at the intersection of electrical/hardware systems and software development. What You Will Be Doing - Design, develop, and debug LabVIEW programs for automated testing of electronic assemblies and sensors -Create virtual instruments (VIs) for data acquisition, signal processing, instrument control, and test sequencing -Interface LabVIEW with test hardware including NI DAQ devices, PCI chassis, cRIO, oscilloscopes, power supplies,...

Description: We are seeking a motivated experienced engineer to join our test engineering team. In this role, you will develop, maintain, and execute automated test systems using National Instruments LabVIEW software to validate product performance, reliability, and quality. This position offers hands-on experience integrating hardware and software for data acquisition, functional testing, and automated test sequences in a production or R&D environment. Ideal for engineers with 3+ years of experience who enjoy working at the intersection of electrical/hardware systems and software development. What You Will Be Doing - Design, develop, and debug LabVIEW programs for automated testing of electronic assemblies and sensors -Create virtual instruments (VIs) for data acquisition, signal processing, instrument control, and test sequencing -Interface LabVIEW with test hardware including NI DAQ devices, PCI chassis, cRIO, oscilloscopes, power supplies, multimeters, and other...

Description: We are seeking a motivated Early Career Production Test Engineer to join our sensors team. This early-career position is ideal for engineers with 1 - 3 years of relevant experience who are passionate about test and integration. You will support the testing of printed circuit board assemblies (PCBAs / CCAs), electronic subsystems, and sensor pod level system testing, helping to maintain efficient production flows while learning best practices in test development and troubleshooting. In this hands-on role, you will work closely with production technicians, senior test engineers, design engineers, and quality teams to identify and resolve issues, improve test processes, and contribute to first-pass yield goals. What You Will Be Doing -Execute and monitor production test processes, including functional testing, boundary scan, environmental stress screening (ESS), and system level verification -Troubleshoot test failures at the board and system level using...

Description: You will be the FPGA Engineer Lead for the ATWS Directed Energy Imaging team. Our team delivers advanced imaging platforms by defining FPGA architectures, developing RTL, validating designs, and fielding production ready hardware that meets stringent performance, cost, and schedule goals. What You Will Be Doing As the FPGA Engineer Lead you will own the end to end development of FPGA solutions and coordinate a multidisciplinary group of systems engineers, software developers, and hardware integrators. You’ll translate system requirements into reliable, high performance hardware while keeping technical risk in check and communicating progress to senior leadership and customers. Your responsibilities will include: • Defining FPGA architecture and creating high quality RTL using AMD/Xilinx Versal and UltraScale+ families. • Driving verification and validation activities, including board level testing and video/signal processing implementation. • Managing task...

Description: You will be the Mechanical Design Engineer for the ATWS (Advanced Targeting and Weapon Systems) team. Our team builds the cutting edge sensor and window hardware that powers the next generation of missile and fire control solutions at Lockheed Martin’s Orlando, FL campus. What You Will Be Doing As the Mechanical Design Engineer you will drive the creation of precision mechanical and opto mechanical prototypes, production parts, and test hardware in a fast paced, dynamic environment. You’ll work side by side with sensor, software, and production engineers to turn concepts into manufacturable, affordable hardware that meets stringent performance standards. Your responsibilities will include: • Developing 2D drawings and 3D models for sensors, windows, and sub assemblies from concept through production release. • Performing tolerance stack up analyses, trade studies, and design reviews to ensure fit, function, and cost targets are met. • Generating and releasing...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we are inspired by innovation and integrity. We believe that by applying the highest standards of business ethics and creative thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! THE WORK You will be the Quality Inspector supporting TLS programs, providing all inspections’ needs to the manufacturing and testing area as well as coaching line operators and assemblers, and actively collaborating with both the various TLS Program Integrated Production Teams and Performance Management Teams (PMTs). This position is responsible for the inspection of the TLS products following the detailed Inspection Plan from the program Quality Engineer which will drive the following actions: creation and communicating non-conformances via Q-notes, perform daily review of work in progress, work...

Description: You will be the Senior Mechanical Design Engineer for the RF Product Center – Missile & Fire Control team. Our team designs, develops, and provides production support for high temperature antenna hardware that powers mission critical sensor systems. What You Will Be Doing As the Senior Mechanical Design Engineer you will own the mechanical design effort for RF sensors, working hand in hand with the design lead and cross functional IPTs. You’ll create 3 D CAD models, develop conceptual layouts, run tolerance analyses, and generate production ready drawings for components such as heat sinks, covers, and brackets. You’ll also lead design trade studies and coordinate developmental test (DVT) activities to keep performance, cost, and schedule on target. Your responsibilities will include: • Produce and maintain high quality 3 D CAD models and 2 D drawings for RF sensor mechanical parts. • Perform conceptual design, tolerance stack up, and thermal/mechanical...

Description: Who we are Lockheed Martin is a global leader in aerospace, defense, and technology solutions. Our Orlando, FL campus is a thriving center of engineering expertise, fostering a culture that encourages creativity, excellence, and the creation of exceptional products. Our team is made up of dedicated professionals who are passionate about pushing the boundaries of what's possible. What We’re Doing At Lockheed Martin, we're at the forefront of cutting-edge technology and innovation. Our campus in Orlando, Florida is a hub for engineering excellence, where we tackle some of the world's most challenging engineering problems. https://www.youtube.com/watch?v=ALIarD6TfTU The Work The Systems Engineer provides technical leadership for Department of Defense (DoD) training simulator programs. You will own the end to end RAM and safety architecture, lead hazard and environmental analyses, and direct Integrated Logistics Support (ILS) activities—including supply chain,...

Description: We are seeking a highly skilled Quality Engineer Staff to be a part of our Advanced Programs Special Programs team. As a Quality team member, you will be a critical part of helping to deliver solutions to the customer. The ideal candidate will have experience in Hardware Quality, Supplier Quality, Corrective Action and limited Software Quality. What You Will Be Doing As the Quality Engineer Staff, you will be responsible for shaping and safeguarding the quality of our products and processes in a dynamic development environment. Your responsibilities will include, but are not limited to: • Developing and reviewing quality standards, processes, methods, work instructions, and procedures for manufactured and procured products • Collaborating with cross-functional teams to ensure quality standards are implemented and met • Identifying and resolving non-conformances in a timely manner • Leading failure analysis, Material Review Board activities, and corrective...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Laser Weapon System (LWS) Turret Closing team. Our team is responsible for delivering high performance, low latency FPGA based closed loop motor control solutions that enable rapid, precise turret positioning for next generation directed energy weapons. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end development of the FPGA motor control hardware, translating system level performance, safety and reliability requirements into a robust architecture, driving verification, hardware in the loop testing and integration, and shepherding the design from concept through production release. Your responsibilities will include: • Capturing and translating system level performance, safety and reliability requirements into a detailed FPGA architecture. • Developing and verifying RTL using SystemVerilog/Verilog and Xilinx/AMD toolsets, creating synthesis, timing and...

Description: You will be the Configuration Management Engineer for the Product Configuration Management team. Our team safeguards product baselines, drives engineering change execution, and delivers accurate configuration data across engineering, manufacturing, quality, and supply chain partners. What You Will Be Doing As the Configuration Management Engineer you will be responsible for analyzing design modifications, coordinating change records, and ensuring every hardware and software item ships with the correct configuration and serialization. You’ll act as the central hub that links engineering change boards, manufacturing, procurement, and quality to keep the program on schedule and compliant with configuration management policies. Your responsibilities will include: • Analyze proposed design changes and assess their impact on product and system baselines. • Create, track, and authorize change orders; prepare comprehensive change authorization documentation for both...