41 system integration test engineer jobs found in Orlando

Description: What You Will Be Doing Flight Termination System (FTS) Engineer on hypersonic development programs. Tasks will include FTS component and system support, to include test procedure generation, integration and test, and pre-flight check activities. Candidate should have a BS or MS in Electrical Engineering or related Engineering discipline. The effort encompasses the full life cycle of systems development from initial requirements definition, design trades, component testing, system integration/test, and troubleshooting. The position requires strong electronic systems knowledge, integration, testing, and excellent troubleshooting skills. Person will coordinate on design and test items with Range Safety Officers (RSO) at multiple flight test locations. Domestic travel will be required approximately 10% for supplier and test locations. Candidate must have a Secret clearance. Why Join Us We are committed to supporting your work-life balance and overall well-being,...

Description: WHAT WE’RE DOING We are RMS. We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 2 Test Engineer within Production Operations for the F-35 Pilot Training Device (PTD) product line of flight simulators, including the Full Mission Simulator (FMS) and the Modified Mission Rehearsal Trainer (MMRT); as well as the F-35 Training Infrastructure Systems (TIS). We integrate deliverable hardware...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Circuit Card Design Engineer for Missile & Fire Control at Lockheed Martin. Our team creates cutting edge electro optical/infrared (EO IR) products that deliver critical sensor capability for missile and aerospace platforms. What You Will Be Doing As the Circuit Card Design Engineer you will oversee technical execution, translate system requirements into subsystem designs, and create electrical interface and power distribution architectures. You will work closely with software, hardware and systems engineers, drive Integrated Master Schedule (IMS) tasking, manage procurement and testing, and guide the team through the Design Assurance process. Your responsibilities will include: • Developing detailed schematics, 3 D models and bill of materials for circuit card assemblies (CCAs) that meet size, weight, power and environmental constraints. • Performing signal integrity, power integrity and thermal analyses to validate designs and ensure...

Description: Lockheed Martin is seeking an experienced engineer to join our Model Based Systems Engineering (MBSE) team within the Hardware-in-the-Loop (HWIL) Center of Excellence (COE). This team operates under the Integration, Test and Evaluation (IT&E) functional directorate and is responsible for developing and maintaining MBSE architecture models that support current and future HWIL capabilities. In this role, you will lead efforts in system architecture and modeling, working closely with HWIL engineers and system product owners. You will help ensure our MBSE models stay current, accurate, and aligned with evolving program needs. The ideal candidate will be experienced with Cameo and SysML-based design and bring a strong background in requirements analysis, decomposition, and architecture development. What You Will Be Doing - Develop and manage requirements and models for current and next-gen Radio Frequency (RF) and Infrared (IR) capabilities - Create IBDs, BDDs, Use...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be a Hardware-in-the-Loop (HWIL) Engineer at Lockheed Martin, responsible for supporting the design, development, and implementation of real-time, closed-loop HWIL capabilities on multiple programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in overseeing the HWIL integration and testing process. What You Will Be Doing As a HWIL Engineer, you will be responsible for: • Overseeing the design, development, and implementation of real-time, closed-loop HWIL capabilities • Supporting program meetings, providing project status, and interfacing with a multi-discipline team • Designing, developing, and testing air vehicle software, firmware, and hardware, and integrating stimulation equipment into the HWIL facility • Debugging software, hardware, connectors, timing, and designs as part of the integration team • Integrating, testing, verifying, and validating the system and various subsystems • Using lab equipment to...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Multi Domain Missile Warning Payload team. Our team creates large format, high frame rate imaging sensor systems that provide survivability enhancing situational awareness for air, space and surface platforms. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will work side by side with a PLD subject matter expert to architect, design and implement programmable logic solutions for the imaging sensor system. You will integrate hardware, develop test plans and verify performance on demanding space based platforms, contributing to a scalable, high performance missile warning payload. Your responsibilities will include: • Define architecture and design specifications for programmable logic components, develop and document RTL (VHDL/Verilog/SystemVerilog) gate level designs that meet performance, power, and reliability requirements. • Create synthesis, place and route, and timing...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Laser Weapon System (LWS) Turret Closing team. Our team is responsible for delivering high performance, low latency FPGA based closed loop motor control solutions that enable rapid, precise turret positioning for next generation directed energy weapons. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will lead the end to end development of the FPGA motor control hardware, translating system level performance, safety and reliability requirements into a robust architecture, driving verification, hardware in the loop testing and integration, and shepherding the design from concept through production release. Your responsibilities will include: • Capturing and translating system level performance, safety and reliability requirements into a detailed FPGA architecture. • Developing and verifying RTL using SystemVerilog/Verilog and Xilinx/AMD toolsets, creating synthesis, timing and...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Description: You will be a FPGA Design & Verification Engineer at Lockheed Martin, responsible for designing, simulating, and integrating Field-Programmable Gate Arrays (FPGAs). Our team is looking for a talented engineer to join our team and support the development of cutting-edge technologies. What You Will Be Doing As the FPGA Engineer you will perform requirements capture, design architecture, implementation, simulation, integration, and troubleshooting for the datalink FPGA designs that are being used to support a new capability. Your responsibilities will include: • Capturing and deriving requirements for FPGA designs • incorporate new crypto architecture leveraging existing NSA algorithms interfacing with data link radio module • RF waveform implementation and incorporation of Simulink/HDL Coder into FPGA design and low-speed messaging and communication with external peripherals • Working with Xilinx/AMD or Microchip FPGA to development solution for Complex...

Description: You will be the Optical Engineer for our Electro-Optical Systems team. Our team is responsible for designing, analyzing, and testing complex optical designs in EO systems, including military fire control, missile, and laser systems. What You Will Be Doing As the Optical Engineer, you will be responsible for developing and implementing innovative optical system concepts, layouts, and detailed designs. Your responsibilities will include: • Conducting research and development to improve manufacturing, integration, and alignment processes for EO systems • Troubleshooting system hardware issues and applying knowledge of geometrical and physical optics to resolve problems • Developing and maintaining optical system designs using optical design codes like CodeV • Supporting subcontractor improvements, program cost reduction activities, and optics-related manufacturing producibility or cost savings initiatives • Traveling to optics suppliers to support program...

Description: This position is for the Chief Engineer Manager – Cyber Security & Emerging Technologies (CSET) in the SP AP program area. The role reports to the SP AP Chief Engineer and leads a high impact, cross functional team delivering affordable, secure, future ready solutions in advanced cyber, electromagnetic (EM) warfare, 5G/6G radio frequency (RF), and micro electronics. The successful candidate will work closely with the entire Advanced Programs staff to ensure synergy across teams and to lead/participate in lessons learned communication What You Will Be Doing • Provide technical leadership for the CSET portfolio, setting direction, priorities, and performance targets. • Drive the capture and white paper process, translating emerging technology opportunities into competitive proposals that satisfy RFP requirements. • Own technical risk management, trade off analysis, and affordability metrics, establishing mitigation plans and continuous improvement indicators. •...

Description: The Advanced Threat Warning Systems (ATWS) Tactical InfraRed Search and Track (TacIRST) Development Chief Engineer provides technical leadership for emerging infrared threat warning technologies across a portfolio of customers, use cases, and operational domains. Reporting to the ATWS program area Chief Engineer, you will partner with program the USG customer base. You will work with the Advanced Programs Special Programs (AP/SP) organization to keep product development pipelines running smoothly. In addition, you will coordinate the AP/SP threat warning technology roadmap, oversee vehicle base kit integrations, and drive international threat warning pursuits. What You Will Be Doing • Providing technical leadership for the ATWS development portfolio. • Coordinating cross discipline IPTs to align schedules, interfaces, and milestones. • Driving technical risk management, trade off, and affordability decisions. • Partnering with USG customer and internal stakeholders...

Description: WHAT WE'RE DOING Rotary and Mission Systems' Training, Logistics and Simulation (TLS) business is Lockheed Martin’s center of excellence for training and logistics products and services, serving the U.S. military and more than 65 international customers around the world. Based in Orlando, TLS develops programs that teach service men and women skills to accomplish their most challenging missions — flying the world’s most advanced fighter aircraft, navigating ships and driving armored vehicles. TLS is the corporation’s hub for simulation, X reality, live-virtual-constructive capabilities, advanced training devices and full-service training programs. TLS also provides sustainment services such as supply chain and logistics IT solutions, spares and repairs, as well as automated test and support equipment. THE WORK As a key member of our Hardware Engineering team, you will: • Develop all HW Architecture artifacts related to electrical and mechanical engineering...

Description: You will be the Lead Composite Design Engineer – Solid Rocket Motor (SRM) for the Missiles & Fire Control Propulsion team in Orlando. Our team creates innovative composite motor cases and pressure vessel hardware that power next generation rockets and boosters, solving some of the aerospace industry’s most demanding technical challenges. What You Will Be Doing As the Lead Composite Design Engineer you will own the mechanical design of composite SRM structures, from concept through test and production. You will work independently and within an Integrated Product Team (IPT) to develop 3 D models, conduct trade studies, write test plans and guide manufacturing to deliver high performance, flight qualified motor cases. Your responsibilities will include: • Leading mechanical design activities for composite booster and tactical rocket motor cases, developing concepts, 3 D CAD models and detailed manufacturing documentation. • Performing trade studies, defining...