34 site reliability engineer jobs found

Description: You will be the Reliability Engineer for the Reliability & Test Engineering Team in Grand Prairie, TX. Our team safeguards product performance by developing, coordinating, and executing technical reliability analyses that ensure our hardware meets rigorous design and contract requirements. What You Will Be Doing As the Reliability Engineer you will be responsible for driving reliability growth across our production hardware. You’ll work hand in hand with design, test and manufacturing engineers, performing root cause studies, supporting reviews, and delivering data driven recommendations that keep our products flying high. Your responsibilities will include: • Conduct Failure Mode, Effects & Criticality Analyses (FMECA) and generate reliability block diagrams. • Develop and execute reliability growth plans; analyze trends to prioritize corrective actions. • Support design reviews, test activities, and prepare for Failure Review Board (FRB) meetings. •...

Description: You will be the Depot Field Engineer for the SOF GLSS team. Our team is responsible for depot‑level repairs, modifications, and refurbishments of critical avionic systems supporting Special Operations missions. What You Will Be Doing As the Depot Field Engineer you will be responsible for delivering high‑quality maintenance and repair services that keep mission‑critical equipment operational. Your responsibilities will include, but are not limited to: Performs depot level repairs, modifications, refurbishments of specific components of the Modernized Target Designation Sight/Pilotage Night Vision System (M-TADS/PNVS). Performs repair, rework, fault isolation, troubleshooting, and acceptance test of mechanical, electrical, structural, hydraulic subsystems and complete systems. Operates automated or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators) and uses knowledge of basic AC/DC theory...

Description: The Electrical Capability - Project Engineer working in supply chain is the technical authority for evaluating, selecting, and developing external electrical component suppliers that produce Circuit Card Assemblies (CCAs), Printed Wire Boards (PWBs), and cable/wire harnesses. The role blends deep electrical manufacturing expertise with strong business acumen to translate capability data into strategic sourcing decisions that drive cost reduction, risk mitigation, and program competitiveness. The engineer partners closely with Supply Chain, Strategic Sourcing, Supplier Quality, and Operations to assess supplier capabilities, resolve technical issues, and ensure that suppliers meet quality, delivery, and performance requirements throughout the product lifecycle. ________________________________________ Key Responsibilities Supplier Technical Evaluation & Selection o Lead technical assessments of electrical suppliers, covering: o CCA assembly processes (SMT,...

Description: Role Overview As a Systems Integration & Test Engineer, you will support the Long Range Hypersonic Weapon (LRHW) program by planning and executing the integration and testing of hardware systems. You’ll play a key role in ensuring systems are built, tested, and validated correctly—both on the production floor and at launch sites. Key Duties / Responsibilities ● Provide technical oversight for hardware assembly, integration, and testing ● Plan and support production floor and launch site operations ● Develop and execute test scripts, procedures, and documentation ● Lead and support teams during integration and test activities ● Present program status and technical results to leadership and customers ● Collaborate with cross-functional teams to resolve issues and improve processes ● Support program reviews and ensure alignment with customer requirements ● Analyze test results and contribute to system validation and reporting Work Environment ● Onsite role...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an RF Design Engineer at Lockheed Martin's Andover, MA facility. We offer an excellent working environment with a mix of cutting-edge design and genuine hands-on electronics laboratory testing and product development. This exciting RF position provides an opportunity to be a key contributor on our team of industry-leading RF design experts. What You Will Be Doing In this role, the Senior Staff RF Engineer will lead the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life...

Description: Lockheed Martin’s Missiles and Fire Control (MFC) business area is seeking a Quality Engineer Staff to support the THAAD (Terminal High‑Altitude Area Defense) program’s anticipated growth and production ramp‑up. What You Will Be Doing The successful candidate will drive quality assurance activities that enable the rapid, reliable expansion of production facilities, tooling, and test infrastructure. The engineer will work closely with cross‑functional teams to verify that new infrastructure and equipment meet all required specifications before release to production. Your responsibilities will include, but are not limited to: Facility & Equipment Enablement – Lead the definition, qualification, and hand‑off of new or modified production spaces, tooling, and test stations; ensure all infrastructure complies with THAAD program requirements. Verification & Validation (V&V) – Physical confirmation/demonstration testing that the documented process,...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking an RF Design Engineer at Lockheed Martin's Andover, MA facility. We offer an excellent working environment with a mix of cutting-edge design and genuine hands-on electronics laboratory testing and product development. This exciting RF position provides an opportunity to be a key contributor on our team of industry-leading RF design experts. What You Will Be Doing In this role, the Staff RF Engineer will support the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life...

Description: At Lockheed Martin, you can build a career by making an impact on some of the most advanced defense technologies in the world. Ocala Operations is a multi-shift manufacturing facility producing circuit card assemblies, wiring harnesses, and electro-mechanical assemblies supporting multiple missile and fire control programs. The Ocala site supports both low-volume/high-mix production and high-volume manufacturing, utilizing a combination of automated processes and labor-intensive assembly operations. Our represented manufacturing workforce is supported by a highly skilled engineering, operations, and quality organization focused on delivering mission-critical products to our customers. Lockheed Martin Missiles and Fire Control in Ocala, Florida is seeking a motivated Senior Supplier Quality Engineer (SQE). In this role, you will serve as the primary quality interface between suppliers, internal operations, and program leadership to ensure procured materials meet all...

Description: Space and strategic defense systems operate in some of the most unforgiving environments imaginable. Success depends on precision — and thermal performance is often the difference between mission success and mission failure. At Lockheed Martin Space, we are redefining resilience and speed through our 21st Century Security® vision. We don’t just build systems — we engineer survivability, performance, and reliability into every component. As a Level 4 Thermal Engineer, you will serve as a technical leader driving the thermal architecture of advanced missile systems from concept through qualification and production. This position supports spacecraft, missile, hypersonic, or other advanced aerospace platforms operating in extreme and highly dynamic environments. If you’re looking for ownership, influence, and the opportunity to solve complex, high-consequence engineering challenges — this role is built for you. -----------------------------------------------------...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and we are looking for a Mechanical Engineer – Opto-Mechanical design in Orlando, FL. You will be the Mechanical Engineer – Opto Mechanical Design for the Missiles & Fire Control – Advanced Systems Team. Our team drives the creation of cutting edge missile and fire control hardware, delivering innovative optics, mechanisms and gimbal solutions from concept through production. What You Will Be Doing As the Mechanical Engineer you will own the end to end opto mechanical development for multiple programs, reporting to the Mechanical Design Senior Manager and partnering...

Description: This position will support multiple site stand-up activities including the use of MDCX Ground Control Stations (GCS) as a part of the MQ-25 Integrated Test Team (ITT). Candidate will be permanently assigned to NAS Patuxent River, MD. Extensive travel may be required in support of site stand-up and test detachment support. As a Quality Engineer, you will be a vital part of the product delivery and Flight Test team. The selected candidate responsibilities will include: Apply quality principles in the areas of: incoming material, product evaluation, program performance, reliability, inventory control, and/or research and development as they apply to product or process quality. Performs technical evaluations including product requirements, specifications, drawings and procedures. Collaborates with program management, engineering, manufacturing, supply chain and customers on quality related issues to ensure quality standards are in place. Engages in product failure...

Description: You will be the ElectroMechanical Engineer for the Microwave Systems Engineering Team. Our team is responsible for designing, developing, and manufacturing cutting edge microwave electronics subsystems that power next generation aerospace platforms. We blend RF/microwave, analog/digital, and mechanical thermal expertise, leveraging modern design tools, an on site state of the art electronics fab, and comprehensive ESS test capabilities. What You Will Be Doing As the ElectroMechanical Engineer you will be responsible for leading the end to end creation of complex microwave electronics packages—from concept through production. You will work side by side with a multidisciplinary group of industry leading engineers, solving challenging technical problems and driving the advancement of new aerospace products and technologies. Your responsibilities will include: • Develop detailed electro mechanical designs for microwave subsystems, integrating RF, analog/digital,...

Description: At Lockheed Martin, you can build a career by making an impact on some of the most advanced defense technologies in the world. Ocala Operations is a multi-shift manufacturing facility producing circuit card assemblies, wiring harnesses, and electro-mechanical assemblies supporting multiple missile and fire control programs. The Ocala site supports both low-volume/high-mix production and high-volume manufacturing, utilizing a combination of automated processes and labor-intensive assembly operations. Our represented manufacturing workforce is supported by a highly skilled engineering, operations, and quality organization focused on delivering mission-critical products to our customers. Lockheed Martin Missiles and Fire Control in Ocala, Florida is seeking a motivated Senior Supplier Quality Engineer (SQE). In this role, you will serve as the primary quality interface between suppliers, internal operations, and program leadership to ensure procured materials meet all...

Description: The Tactical Infrared Search and Track (TacIRST) Platform‑Expansion Chief Engineer provides technical leadership for the development, integration, and fielding of infrared‑threat‑warning technology across a portfolio of platforms and customers. This position reports to the Advanced Threat‑Warning Systems (ATWS) program‑area Chief Engineer and partners with senior engineers, program managers, and the U.S. Government (USG) customer base to ensure seamless delivery of TacIRST capabilities to multiple air vehicles. The work directly impacts war‑fighter survivability and mission success across services and allied forces. What You Will Be Doing • Provide technical leadership for the TacIRST portfolio – set the overall system architecture and guide end to end integration of hardware and signal processing algorithms. • Drive technical risk management, trade off, and affordability decisions and continuous improvement metrics that keep the program on track. • Partner with the...

Description: We are seeking a highly experienced Staff Electrical Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 7 - 12 years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf (COTS)...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. OVERVIEW: For over 60 years, the Fleet Ballistic Missile (FBM) team has supported the...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: We are seeking an experienced Quality Engineer Sr to join the Missiles & Fire Control (MFC) team and enhance our Supply Chain Quality Assurance efforts. In this role you will be responsible for establishing and maintaining the quality framework that governs purchased parts from suppliers, through our manufacturing processes, and ultimately to the customer. What You Will Be Doing As a Quality Engineer Sr supporting Supply Chain Quality in Lufkin, TX, you will drive automation and mistake proofing initiatives across the inbound flow of supplier deliveries—including receiving, receiving inspection, and stock put away processes. You will coordinate equipment maintenance for receiving inspection, provide technical guidance to ensure component compliance, and implement streamlined tools for efficient Supplier Quality task management. Additionally, you will spearhead continuous improvement initiatives to increase the reliability and efficiency of quality controlled...

Description: LM Space is seeking energized individuals who are passionate about building the space technologies of tomorrow. Production Quality Assurance (PQA) has an opportunity for a Quality Engineering Manager to support the Production Operations organization at the Stennis and Michoud Assembly Facilities. The PQA team onsite is responsible for all assembly, fabrication, manufacturing as well as integration and test of a wide array of hardware and providing operational support to our customers. As Quality Engineering Manager, you will be responsible for a diverse array of activities which include: • Managing the Quality functions and staff within the Production Quality organization for both represented and non-represented employees • Supervise, lead, & direct Quality Engineers & Quality Inspectors who apply quality principles in the areas of: design, incoming material, production control, product evaluation, program performance, reliability, inventory control, and/or...

Description: You will be the Mechanical Design Engineer for the F 35 Electro Optical Targeting System (EOTS) team in Orlando, FL. Our team delivers cutting edge mechanical solutions that keep the F 35’s mission critical sensors operating flawlessly, driving innovation from concept through production. What You Will Be Doing As the Mechanical Design Engineer you will be responsible for turning tough production and design challenges into elegant, manufacturable solutions. Working side by side with production, hardware design, and analysis groups, you’ll create new parts, issue engineering changes, and supply the detailed data the supply chain needs to build and ship world class hardware. Your responsibilities will include: • Generating and maintaining 3 D solid models and 2 D drawings in the Digital Product Lifecycle Management (dPLM) environment. • Producing release ready engineering documents (drawings, BOMs, assembly parts lists) for fabrication and procurement. •...