17 rf systems engineer jobs found

Description SAIC is seeking an Electrical Engineer for our customer site in North Charleston, SC. Responsibilities (include, but are not limited to): Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education and Experience: Bachelor's degree and five (5) years of experience; four (4) years additional in lieu of degree Experience programming microcontrollers to monitor system status and implement control systems...

Description SAIC is seeking an Electrical Engineer for our customer site in North Charleston, SC. Responsibilities (include, but are not limited to): Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education and Experience: Bachelor's degree and five (5) years of experience; four (4) years additional in lieu of degree Experience programming microcontrollers to monitor system status and implement control systems...

Description Position Overview SAIC is hiring a Part Time Systems Engineer to support the Electromagnetic Expeditionary Electronic Warfare Division at NSWC Crane. This part-time position is intended for an experienced engineer who can provide focused technical support in diagnostics, test execution, troubleshooting, and sustainment engineering. The engineer will work across hardware, software, and subsystem interfaces to support fault detection, failure isolation, and maintainability. The work schedule and hours will be based on program needs and may include test events, troubleshooting, documentation, and technical reviews. Core Responsibilities Support the design, integration, evaluation, and sustainment of BIT/BITE and diagnostic capabilities for mission systems, subsystems, and test assets. Analyze system requirements and translate them into testable diagnostic functions, verification methods, and maintainability features. Support laboratory and field testing,...

Description SAIC is seeking an Electrical Engineer with focus on Radio Frequency principals to support the Expeditionary Electronic Warfare Division at NSWC Crane under the JCREW program. In this role, you will design, integrate, and evaluate RF and electronic warfare technologies, collaborating with multidisciplinary teams to analyze signals, conduct lab and field testing, and deliver key engineering recommendations. Key Responsibilities Support development, integration, testing, and evaluation of RF/EW systems and test infrastructure. Analyze RF hardware architectures, including transmit/receive chains and interfaces. Use lab equipment (spectrum analyzers, VNAs, signal generators) to measure and evaluate signals. Support lab and field testing, handling setup, execution, troubleshooting, and post-test analysis. Perform RF signal analysis, waveform generation, modulation assessment, and RF propagation modeling. Provide recommendations to improve test rigor,...

Description SAIC is seeking a talented and motivated Electrical Engineer with experience in radio frequency (RF), digital signal processing (DSP), and system testing to join our cutting-edge engineering team. The ideal candidate will contribute to the design, development, and testing of advanced systems, including maritime off-board countermeasures and other sophisticated electronic warfare solutions. This role offers the opportunity to work at the forefront of technology, delivering mission-critical innovation for military and defense applications. The selected candidate will engage in activities across the product lifecycle, from initial system and component design to prototyping, testing, and deployment. Job Description: Develop and characterize RF system designs, waveforms, and architectures for use in maritime electronic warfare and off-board countermeasure systems. Design and implement digital signal processing algorithms to detect, process, and mitigate advanced...

Description SAIC is seeking a Senior Electrical Engineer to support and assist Site Leadership of the Unmanned Aerial Vehicles Information Operations (UAVIO) program Naval Information Warfare Center Pacific (NIWC-Pac), Naval Base Point Loma, by supporting RF payload integration, edge computing, configuration management and technical writing. Core engineering duties : RF integrated circuits/systems & Payload Integration: Hands-on integration of RF systems, software-defined radios (SDRs), antennas, and computing nodes onto unmanned systems (air and surface). Hardware architecture design and development of electronic/RF assemblies SWaP Analysis & Power: Assess and manage Size, Weight, and Power (SWaP) constraints, power distribution, and data routing for small form-factor tactical payloads. Lab & Bench Testing: Utilize standard test equipment (spectrum analyzers, network analyzers, signal generators, multi-meter and oscilloscopes) to validate system...

Description JOB DESCRIPTION : SAIC is seeking a Senior Mechanical Engineer to lead multi-disciplinary engineering teams and projects related to the design, manufacture, and sustainment of US military equipment and systems and other related systems in support of its Indianapolis facility. This position will be a hybrid role with approximately (1-4 days per week onsite) at our Indianapolis, IN facility. JOB DUTIES : May work with teams developing, producing, and sustaining radar and related RF systems, electronic warfare systems, communications equipment and systems, acoustic systems, electro-optic systems, weapon system launch and control systems, test equipment, and other military equipment. Candidate is expected to have mastery in the use and application of technical standards, principles, theories, concepts and techniques for designing mechanical constructs. Candidate is expected to be able to work independently and solve complex engineering problems...

Description SAIC is seeking a senior Multi-Disciplinary Optical Engineer to join the Space and Intelligence Business Group. You would work on a joint Intelligence Community (IC) and Department of Defense (DoD) crown jewel program providing highly specialized space/counter-space engineering, scientific, and analytical services from Aurora/Denver, Colorado. We support the Nation's leading-edge IC and DoD space programs and offer compelling, deep-technical work that has direct influence and impact on program development and operations. Our team has Subject Matter Experts (SMEs) across a variety of disciplines, including physics, math, RF, optics, space acquisition and operations, and intelligence collection and analysis. The Senior Optical Project Engineer will work in a collaborative team-focused environment of U.S. Government civilians and contractors solving applied technical problems and developing usable solutions for multiple space-related capabilities and threats. The...

Description SAIC is seeking a Test and Evaluation Engineer to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports developmental test and evaluation activities for Electronic Warfare (EW) systems and subsystems across their lifecycle under the SENSEI program. The selected candidate will develop detailed test plans, procedures, and reports to verify and validate system requirements. Additionally, this role involves designing and executing laboratory and field tests, operating RF measurement equipment, and analyzing test data to produce technical assessments. Job Responsibilities: Support developmental test and evaluation (DT&E) activities for Electronic Warfare systems and subsystems across the system lifecycle. Develop detailed test plans, procedures, and test reports to support verification and validation of system requirements. Design, plan, and execute laboratory and field tests, including RF and microwave system testing....

Description SAIC is seeking an Electrical Systems Engineer (EE2) to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports RF and electrical engineering for signal communications management and power distribution supporting test and evaluation activities. The selected candidate will design and optimize electrical and electronic test range infrastructure, including wired and wireless communications and fiber-to-cellular towers. Additionally, this role involves managing range power distribution systems, performing power system studies, and testing/evaluating threat devices. Job Responsibilities: Provide RF and electrical engineering support for signal communications management and power distribution in support of MXQT test and evaluation activities. Design, analyze, evaluate, and optimize electrical and electronic test range infrastructure, including wired and wireless communications systems. Manage and support fiber-to-cellular...

Description SAIC is seeking an experienced and highly motivated Senior Systems Engineer to lead Integration, Validation, and Verification (IV&V) activities for an Automated Test Set program supporting undersea defense systems in Middletown, RI . This is a technical leadership position responsible for owning the integration and V&V strategy and execution across the subsystems comprising a complex test set, working in close partnership with the Program's Lead Systems Engineer and a cross-functional team of engineers, technicians, and government stakeholders. This is a broad, high-impact role encompassing both integration leadership and verification/validation leadership across the program - offering significant scope, autonomy, and technical ownership for the right candidate. The program is currently preparing for Preliminary Design Review (PDR). This is an excellent opportunity for a systems engineer to step into a technical leadership role during a critical design...

Description SAIC is seeking a talented and motivated Electrical Engineer with experience in radio frequency (RF), digital signal processing (DSP), and system testing to join our cutting-edge engineering team. The ideal candidate will contribute to the design, development, and testing of advanced systems, including maritime off-board countermeasures and other sophisticated electronic warfare solutions. This role offers the opportunity to work at the forefront of technology, delivering mission-critical innovation for military and defense applications. The selected candidate will engage in activities across the product lifecycle, from initial system and component design to prototyping, testing, and deployment. Key Responsibilities: Develop and characterize RF system designs, waveforms, and architectures for use in maritime electronic warfare and off-board countermeasure systems. Design and implement digital signal processing algorithms to detect, process, and...

Description SAIC is seeking a CAD Mechanical Engineer to support the U.S. Army Combat Capabilities Development Command (CCDEVCOM), Engineering and Systems Integration (ESI) Directorate, Quick Reaction Capability (QRC) Branch. This position is on-site in Aberdeen, MD. Relocation assistance may be offered. In support of the Information Analysis Center Multiple Award Contract (IAC MAC) and Task Order (TO), SAIC is seeking multiple qualified and cleared candidates. We are currently assembling our team of experienced professionals who have in-depth experience in providing expertise to support research, development, assessments, adaption, transformation, testing, integration, demonstrations, transition, fielding, sustainment, and enhancement of designated information and/or intelligence software systems. Job Duties: Lead a small team of CAD Designers to include team oversight, workload management, QA of work performed, task tracking and documentation using JIRA, reporting work...

Description Position Summary: The RF Payload Engineer will support advanced space systems with a focus on RF payload development, integration, and production testing. This role contributes to the development, verification, and sustainment of RF payload hardware for space-based intelligence, surveillance, reconnaissance (ISR), and communications missions. Key Responsibilities • Lead and execute RF payload development including architecture definition, component selection, and subsystem integration. • Develop and implement production-level RF payload testing including functional, performance, and environmental test plans. • Perform RF link analysis, payload signal chain validation, and troubleshooting at system and component levels. • Collaborate with multi-disciplinary teams on payload interfaces and mission requirements. • Support hardware manufacturing readiness, test procedure development, and flight certification processes. • Generate engineering documentation,...

Description Position Summary The Radar System Design Engineer will support advanced space-based ISR and ground radar mission systems by performing radar architecture definition, system-level design, and radar signal processing development. This role aligns with the requirement for Radar system design or radar signal processing expertise in Chantilly-based roles. Key Responsibilities • Lead radar system architecture development, deriving functional and performance requirements from mission needs. • Develop radar waveform designs, radar modes, and associated signal processing algorithms. • Perform modeling, simulation, and analysis of radar system performance under operational conditions. • Support hardware-in-the-loop testing, sensor integration, and validation of radar subsystems. • Develop technical documentation, design artifacts, performance briefs, trade studies, and algorithm specifications. • Collaborate with systems, integration, MBSE, payload, and ISR engineering...

Description SAIC is seeking a Satellite Payload Engineer to provide onsite systems engineering and technical advisory (SETA) services in support of an SAIC Prime Program supporting the National Reconnaissance Office (NRO) in Chantilly, VA. Note: Qualified candidates must have an active Top Secret/SCI clearance with the ability to obtain a Poly to be considered. As a Satellite Payload Engineer, you will support technical efforts requiring deep expertise in satellite payload architecture, SAR payload development, SAR processing and image formation, and end-to-end image chain performance. You will apply hands-on satellite hardware experience and radar payload system knowledge to assess performance, resolve issues, and ensure seamless integration across space and ground segments. You will also drive enterprise-level trade studies to define and refine requirements for future satellite capabilities, supporting mission success across the full lifecycle. Job Responsibilities...

Description SAIC is seeking a Satellite Communications Systems Engineer to support mission-critical communications for national security and intelligence operations. You will conduct research, develop innovative solutions, and analyze advanced satellite communication systems to enable design, development, and integration for secure, reliable data, voice, or video transmissions. Job Responsibilities: Lead research and development of novel satellite communication technologies for national security applications Perform system-level analysis, link budget calculations, and simulations to optimize performance under operational constraints Integrate satellite communications with ground stations, mobile platforms, and other defense assets Analyze and resolve technical issues in deployed systems, including RF interference and encryption challenges Collaborate with multidisciplinary teams, including government and contractor personnel, to ensure mission...