60 design jobs found

Description Position Summary The Radar System Design Engineer will support advanced space-based ISR and ground radar mission systems by performing radar architecture definition, system-level design, and radar signal processing development. This role aligns with the requirement for Radar system design or radar signal processing expertise in Chantilly-based roles. Key Responsibilities • Lead radar system architecture development, deriving functional and performance requirements from mission needs. • Develop radar waveform designs, radar modes, and associated signal processing algorithms. • Perform modeling, simulation, and analysis of radar system performance under operational conditions. • Support hardware-in-the-loop testing, sensor integration, and validation of radar subsystems. • Develop technical documentation, design artifacts, performance briefs, trade studies, and algorithm specifications. • Collaborate with systems, integration, MBSE, payload, and ISR engineering...

Description SAIC is seeking an Systems Engineer to support the Infrared and Radio Frequency (IR/RF) Surface Offboard Countermeasures Engineering Branch located at NSWC Crane in Crane, Indiana. The candidate will provide high level of technical and engineering support for Nulka systems. Job Description, includes but not limited to: Support engineering activities such as design, test, modification, fabrication and assembly of prototype electronic and mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. Applications may include electronic circuits, photonics and logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. . Assists in determining methods or actions to remedy malfunctions. Collects, maintains, organizes, compiles, and manipulates technical data. Assist in preparing engineering documentation,...

Description SAIC is seeking a TS/SCI (with Poly) cleared Quantum Sensing Engineer responsible for providing high quality advisory services and program planning, implementation, and integration for Quantum Sensing and Networking efforts for Space Applications. As part of the team, you will be required to collaborate with others, as well as work individually, on strategies, roadmaps and recommended solutions for the implementation of Quantum Sensing and Networking Modalities. These modalities include atomic clocks, atom interferometers, quantum magnetometers, Rydberg sensors, and single photon detectors, among others. In this role, the Quantum Sensing Engineer will work with the customer to develop a quantum portfolio and will be a key performer of its implementation. Will work with the Customer to enhance and broaden the current efforts, as well as identifying new modalities of interest. Understanding how to deploy components of a Quantum System into the Space Environment is a...

Description SAIC is seeking a TS/SCI (with Poly) cleared Quantum Sensing Engineer responsible for providing high quality advisory services and program planning, implementation, and integration for Quantum Sensing and Networking efforts for Space Applications. As part of the team, you will be required to collaborate with others, as well as work individually, on strategies, roadmaps and recommended solutions for the implementation of Quantum Sensing and Networking Modalities. These modalities include atomic clocks, atom interferometers, quantum magnetometers, Rydberg sensors, and single photon detectors, among others. In this role, the Quantum Sensing Engineer will work with the customer to develop a quantum portfolio and will be a key performer of its implementation. Will work with the Customer to enhance and broaden the current efforts, as well as identifying new modalities of interest. Understanding how to deploy components of a Quantum System into the Space Environment is a...

Description SAIC is seeking an Electrical Engineer to support the US Navy in Arvada, CO. Note : This is a hybrid role with onsite support needed at our customer site in Arvarda, CO. Candidate will need to be located near Arvarda, CO or be willing to relocate to the area. JOB DESCRIPTION: The electrical engineer will complete tasking related to the design, manufacture and sustainment of US Navy Aircraft Equipment, related systems, and other military systems in support of its Indianapolis facility. The ideal engineering candidate is expected to have a strong background in the use and application of technical standards, principles, theories, concepts and techniques for designing circuits, analyzing electronic systems, and troubleshooting electronic and electrical constructs. The engineering candidate is also expected to be able to work independently, will mentor and give guidance to lower level electrical engineers, and will be able to review their work and help them...

Description SAIC is seeking a motivated Mechanical Engineer to join our team supporting the U.S. Navy at NSWC Crane in Crane, IN. This is an excellent opportunity for an early-career engineer to work hands-on with advanced missile battery systems and next-generation energy technologies. Key Responsibilities: • Develop and document test plans and procedures for missile battery systems. • Set up and execute tests in lab/field environments. • Collect, analyze, and summarize data to evaluate battery performance and aging. • Prepare concise reports and recommendations for new designs and prototypes. • Perform aging/surveillance, lot acceptance, qualification, and special engineering tests. • Ensure all work complies with DoD and Navy test requirements. Qualifications Required Education and Experience: Bachelors Degree in Mechanical Engineering and zero years of related experience Required Clearance: Interim Secret Clearance will be required to start with ability...

Description SAIC is seeking a skilled Senior Mechanical Engineer to join our team in Huntsville, AL and provide technical expertise in designing, developing, and implementing complex mechanical systems for a reconfigurable air defense project. This role requires a deep understanding of mechanical engineering principles, a passion for solving challenging technical problems, and the ability to contribute in a cross functional team environment. The ideal candidate will bring 3 years of professional experience, advanced engineering knowledge, and a proven ability to design, analyze, and optimize mechanical systems. This is an exciting opportunity to be part of a fast-paced, high-impact project. Key Responsibilities Mechanical Design and Analysis: Design and develop complex mechanical systems and components. Collaborate with cross-functional teams (Electrical, Software, and Systems Engineers) to ensure the mechanical design meets the performance, reliability, and...

Description SAIC is seeking an Electronics Engineer for our customer site in North Charleston, SC. Responsibilities (include, but are not limited to): Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education and Experience: Bachelor's degree and five (5) years of experience; four (4) years additional in lieu of degree Experience programming microcontrollers to monitor system status and implement control systems to...

Description SAIC is seeking an Electronics Engineer for our customer site in North Charleston, SC. Responsibilities (include, but are not limited to): Develop a modular, power distribution architecture for distributed maritime sensors Integrate voltage-level negotiation for subsystems (similar to that of USB-C PD) Incorporate renewable energy solutions such as wave harnessing, solar, peltier into a system architecture for improved persistence Perform power budget analysis to inform power system and support sensing, communication, and edge processing operations of complex systems Develop designs for signal/power PCBs using best practices for trace routing, thermal management, signal isolation, and grounding Qualifications Required Education and Experience: Bachelor's degree and five (5) years of experience; four (4) years additional in lieu of degree Experience programming microcontrollers to monitor system status and implement control systems to...

Description SAIC is seeking a Sustainment Engineer to support the US Navy in Crane, IN. You will be part of a collaborative team of engineers and technicians working to support sustainment activities within the Strategic Systems unit at NSWC Crane. This role will be focused on adapting and updating existing assets and infrastructure for the Conventional Prompt Strike missile systems used on the new Columbia/Dreadnaught class submarines. You will primarily work on the Crane Naval Base directly supporting the Government Customer, with occasional trips to SAIC's facility in Bedford, IN. JOB RESPONSIBILITES: Demonstrate strong organizational skills and the ability to work on multiple tasks concurrently with changing deadlines and priorities. Interact directly with customers to extract requirements, generate a plan, and report status . Prepare Engineering Change Proposals (ECPs) to revise official drawings. Conduct Failure Analysis and recommend corrective actions...

Description SAIC is seeking a Mechanical Engineer - to join a multidisciplinary team supporting the design and development of advanced receiver (Rx) and transmitter (Tx) systems for aerospace and sea-based platforms. This role focuses on providing mechanical engineering expertise to ensure the successful integration of systems within diverse environments, ranging from flight systems to shipboard installations. The selected individual will design mechanical solutions for system integration, including mounting systems, antenna gimballing/vectoring mechanisms, and equipment enclosures. Additional responsibilities include developing installation plans, addressing environmental factors such as aerospace and shipboard conditions, and ensuring compliance with stringent operational specifications. The role also involves packaging designs for transportation and engineering considerations for material/weight handling and structural loading for shipboard systems. This position requires a...

Description SAIC is seeking a Mechanical Engineer to support Specialized Munitions for NSWC Crane, IN. Typical tasking includes engineering/planning for production projects, both short-term tactical planning to long-term strategic planning. Mechanical engineering support includes: Engineering Support - support project development, equipment repair and preventive maintenance support. Tactical Support - develop scope and cost estimates in support of tactical projects. Provide project planning, track progress to schedule, and action item resolution. Strategic Support - prepare cost estimates and provide an assessment to recommend the best alternative. Provide investment recommendations to the Government with high-level cost, schedule, and priority identified. Provide project planning, track progress to schedule, and action item resolution. Operations and Sustainment Support - Provide project management expertise to participate in operations and sustainment planning...

Description Position Overview SAIC is hiring a Part Time Systems Engineer to support the Electromagnetic Expeditionary Electronic Warfare Division at NSWC Crane. This part-time position is intended for an experienced engineer who can provide focused technical support in diagnostics, test execution, troubleshooting, and sustainment engineering. The engineer will work across hardware, software, and subsystem interfaces to support fault detection, failure isolation, and maintainability. The work schedule and hours will be based on program needs and may include test events, troubleshooting, documentation, and technical reviews. Core Responsibilities Support the design, integration, evaluation, and sustainment of BIT/BITE and diagnostic capabilities for mission systems, subsystems, and test assets. Analyze system requirements and translate them into testable diagnostic functions, verification methods, and maintainability features. Support laboratory and field testing,...

Description SAIC is seeking a Electrical Engineer to join in and support our team in Panama City Beach, Florida. JOB DESCRIPTION: You will be working in a dynamic environment at our Holley Engineering and Integration Center. You will be supporting multiple Navy projects of various scales and multiple contracts. You will hone your leadership skills and gain engineering experience rapidly. JOB DUTIES: Use your expertise to provide guidance on a variety of technical projects. Design electrical systems, control systems, equipment and packages. Capture design requirements using MBSE principles. Conduct feasibility studies and testing of new and modified designs. Direct support personnel in the preparation of detailed design, documentation, testing and prototype fabrication. Provide design information to drafting for technical documentation team. Provide direct support to the program manager on technical issues. Prepare variance documentation as required...

Description SAIC is seeking an organized and motivated Senior Mechanical Engineer who is looking for an opportunity to grow with our company as we continue to expand our support in the modernization and development of various Common Aviation Command and Control System (CAC2s) designs as well as supporting production activities out of our Charleston, SC office. The ideal candidate should have experience supporting various projects at all levels showcasing leadership qualities and attributes, as well as project management skills. The candidate should have the ability to discuss projects they have supported and/or led. Candidate should be able to self-manage/self-direct projects, and communicate regularly with customers, engineers, logisticians, and technicians. Job Duties: Must be able to lead multiple high-profile projects which involve interfacing with the customer to define key test requirements, sourcing and interfacing with multiple suppliers / vendors,...

Description SAIC is seeking a CAD Drafter I to support the US Navy in North Charleston, SC . The ideal candidates will be responsible for providing design and drafting support to complete large complex assembly models and drawings. The CAD Drafter will be an integral part of the team creating/updating Technical Data Packages; being familiar with ASME standards, Technical Data Packages, and military drawing standards desired. The Drafter / CAD Operator will coordinate frequently with the drafting team lead for current assignments, as well as coordinating with the project engineer, to meet the customer demands. The candidate will be required to occasionally travel, locally, to the customer's facility where the vehicles are located to work with the engineers and technicians to develop prototype mounting solutions. Efforts will be focused toward GFE and custom fabrication integration for military C4ISR systems. Job Duties: (include but are not limited to) Provide...

Description SAIC is seeking an Electrical Engineer with focus on Radio Frequency principals to support the Expeditionary Electronic Warfare Division at NSWC Crane under the JCREW program. In this role, you will design, integrate, and evaluate RF and electronic warfare technologies, collaborating with multidisciplinary teams to analyze signals, conduct lab and field testing, and deliver key engineering recommendations. Key Responsibilities Support development, integration, testing, and evaluation of RF/EW systems and test infrastructure. Analyze RF hardware architectures, including transmit/receive chains and interfaces. Use lab equipment (spectrum analyzers, VNAs, signal generators) to measure and evaluate signals. Support lab and field testing, handling setup, execution, troubleshooting, and post-test analysis. Perform RF signal analysis, waveform generation, modulation assessment, and RF propagation modeling. Provide recommendations to improve test rigor,...

Description SAIC is seeking a talented and motivated Electrical Engineer with experience in radio frequency (RF), digital signal processing (DSP), and system testing to join our cutting-edge engineering team. The ideal candidate will contribute to the design, development, and testing of advanced systems, including maritime off-board countermeasures and other sophisticated electronic warfare solutions. This role offers the opportunity to work at the forefront of technology, delivering mission-critical innovation for military and defense applications. The selected candidate will engage in activities across the product lifecycle, from initial system and component design to prototyping, testing, and deployment. Job Description: Develop and characterize RF system designs, waveforms, and architectures for use in maritime electronic warfare and off-board countermeasure systems. Design and implement digital signal processing algorithms to detect, process, and mitigate advanced...

Description SAIC is currently seeking an Engineering Tech IV to provide drafting and documentation support for NSWC Crane. In this role, you will work closely with engineers, drafters and technicians, contributing to the creation and updating of Technical Data Packages. The position requires experience with Creo and SolidWorks 3D parametric software, as well as Windchill, or a willingness to quickly learn these tools. Success in this role depends on technical proficiency and the ability to understand and efficiently execute relevant processes and procedures. If you are adaptable and thrive in a dynamic environment, this could be an excellent opportunity for you. The team is committed to providing training and support to ensure your success. Job Description Roles & Responsibilities: Creates and modifies detailed models and drawings using Creo and occasional other forms of CAD Software. Works closely with the Customer, Engineers, Technicians and...

Description Join a mission driven satellite program at the forefront of national defense innovation. Our team is developing cutting edge technologies that directly support critical Department of War priorities, combining both proven and first-of-their-kind capabilities that have never been applied in space. Operating within a fast-paced acquisition environment, we benefit from streamlined authorities and direct access to senior Government decisionmakers, enabling us to move quickly and execute aggressive schedules using the most innovative contracting strategies available. SAIC is seeking self-directed leaders who skillfully navigate ambiguity, solve complex challenges, and bring diverse expertise to a dynamic environment focused on delivering capability rapidly. Success here requires adaptability, initiative, and a willingness to wear multiple hats in support of a high impact mission. Candidates experienced as USAF/USSF acquisition officers (AFSC: 63A) or developmental...