197 device engineer jobs found

Basic Qualifications Bachelor's degree in Electrical or Computer Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position What You'll Do Architect and implement high-performance FPGA designs in VHDL and/or Verilog targeting Xilinx and Microchip device families. Perform synthesis, place-and-route, and timing closure using Vivado or Libero, including advanced techniques such as pipelining, register retiming,...

Description: Missiles and Fire Control in Ocala, Florida has multiple openings for Test Engineers across all ranges of experience. Our team is responsible for designing, integrating, and ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for designing test consoles, interface test adapters (ITAs), test cables, and test fixtures. You will be architecting software and writing source code. You will be hands-on integrating the test system hardware, software, and device under test (DUT), then performing verification and validation of the test system. You will work with a range of technologies, including TestStand®, LabVIEW®, Matlab, and C# to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional testing. Your responsibilities...

Description: You will be the Electromechanical Design Engineer for the Ignition Safety device (ISD) for the PrSM team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for PrSM. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials, obtaining vendor...

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at the forefront of cutting-edge technology and engineering. LM SPACE: WHAT WE'RE DOING Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. And we’re reimagining how space can connect us, ensuring security and prosperity. THE WORK Lockheed Martin is seeking a skilled Level 2 Hardware Engineer with a Secret security clearance to work from our beautiful Colorado Springs location . This position is contingent upon the program award...

Description: Missiles and Fire Control in Ocala, Florida has multiple openings for Test Engineers across all ranges of experience. Our team is responsible for designing, integrating, and ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for designing test consoles, interface test adapters (ITAs), test cables, and test fixtures. You will be architecting software and writing source code. You will be hands-on integrating the test system hardware, software, and device under test (DUT), then performing verification and validation of the test system. You will work with a range of technologies, including TestStand®, LabVIEW®, Matlab, and C# to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional testing. Your responsibilities...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 3 System Integration/Test Engineer (SI/TE) within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) product line of flight simulators, including the Full Mission Simulator (FMS), the Modified Mission Rehearsal Trainer (MMRT), the Deployable Mission Rehearsal Trainer (DMRT), and various...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 2 Systems Integration/Test Engineer (SI/TE) within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) product line of flight simulators, including the Full Mission Simulator (FMS), the Modified Mission Rehearsal Trainer (MMRT), the Deployable Mission Rehearsal Trainer (DMRT), and various...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 4 Software Integration Lead on the System Integration/Test Engineer (SI/TE) team within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) product line of flight simulators, including the Full Mission Simulator (FMS), the Modified Mission Rehearsal Trainer (MMRT), the Deployable Mission...

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at the forefront of cutting-edge technology and engineering. LM SPACE: WHAT WE'RE DOING Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. And we’re reimagining how space can connect us, ensuring security and prosperity. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work Lockheed Martin Rotary and Mission Systems (RMS) in Moorestown, NJ is seeking a full-time Computing Systems/Software Senior Engineer for their Infrastructure, Communications, & Network Engineering team to support multiple Mission Integrated Command & Control (MIC2) Lines of Business (LOB) programs. This role will involve a combination of software development and systems engineering using an Agile, Development, Security, and Operations (DevSecOps) approach. Tasking can include: • Software Design/Development/Integration/Test • Systems Design/Development/Integration/Test • Deriving of program requirements • Integration, test and requirement verification • Configuring...

Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work Lockheed Martin Rotary and Mission Systems (RMS) in Moorestown, NJ is seeking a full-time Computing Systems/Software Senior Engineer for their Infrastructure, Communications, & Network Engineering team to support multiple Mission Integrated Command & Control (MIC2) Lines of Business (LOB) programs. This role will involve a combination of software development and systems engineering using an Agile, Development, Security, and Operations (DevSecOps) approach. Tasking can include: • Software Design/Development/Integration/Test • Systems Design/Development/Integration/Test • Deriving of program requirements • Integration, test and requirement verification • Configuring...

Description: What We’re Doing Do you want to be part of the team that provides training systems for the world's most advanced aircraft – F-35 Joint Strike Fighter? Do you enjoy a dynamic, fast-paced work environment? Join Lockheed Martin's dynamic team working on the cutting edge of aerospace technology. We provide training systems for the world's most advanced aircraft, including the F-35 Joint Strike Fighter. The Work We are seeking a highly motivated and experienced Systems Engineer to join our team. The successful candidate will be responsible for supporting technical efforts in the change workflow for pilot training devices, encompassing retrofit installation, and technical coordination and communication with all stakeholders. The ideal candidate will have a strong background in systems engineering, with experience in hardware and software retrofit installation, and excellent communication skills. As a key member of our Systems Engineering team, you will: *...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Basic Qualifications Bachelor's degree in Electrical or Computer Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As a  Sr Advanced FPGA/Firmware Engineer  for the Torpedo Systems Group, you will work with engineering teams to develop, deliver, and maintain software and firmware products. Additionally, you will be the government customer onsite and frontline engineering...

Description: You will be the FPGA Design Engineer for Lockheed Martin’s Missile and Fire Control team. Our group designs, simulates, and integrates cutting edge datalink and launcher systems that keep our warfighters ahead of emerging threats. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA solutions that power both existing and next generation defense systems. Your responsibilities will include: • Develop complex FPGA designs, including specification, design, verification, and implementation • Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements • Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements • Collaborate with the team through the Design Architecture development process Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a...

Description: You will be a Focal Plane Array Process Engineer with our Infrared Sensors Business on site in Goleta, CA. Our team is responsible for developing and manufacturing advanced Focal Plane Arrays (FPAs), and we are looking for a talented engineer to join our team. What You Will Be Doing As a Staff FPA Process Engineer, you will be responsible for the technical and production leadership in the fabrication and execution of advanced Focal Plane Array (FPA) including wicking, plasma system, substrate thinning, dicing, Anti-Reflection (AR) coating, and flip-chip bonding for hybridization, a key step in the manufacturing process imaging devices. You will play a critical role in developing and optimizing the processes, procedures, tooling, and equipment to maximize yield, efficiency, and throughput and methodologies used to precisely align and bond detector arrays and readout integrated circuits (ROICs), creating high-performance FPAs. You'll work in a fast-paced,...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. Missiles and Fire Control in Archbald, PA has an opening for a Test Engineer with Automated Test Equipment design experience. Our team is responsible for designing, integrating, and ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for designing test consoles, interface test adapters (ITAs), test cables, and test fixtures. You will be architecting software and writing source code. You will be hands-on...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: : [Department of Defense Secret security clearance is preferred at time of hire.] Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As an Advanced Electro-Optic Design Engineer, you’ll design, develop, build and test systems and products based on optic, photonic and laser technologies. This involves interacting with device, hardware and software design teams to assist in the overall development of optical systems;...

Description: Electrical Engineer - Systems Integration/Test - Level 4 We are Lockheed Martin The Electronic Hardware Design (EHD) team develops flightworthy safety critical electronic hardware, embedded software, FPGAs, and test equipment for LM Aero aircraft programs and related needs. We are a co-located team of electrical, mechanical, software, test, and project management engineers under one manager. These EHD disciplines develop requirements, produce detailed designs, qualify, document, develop test equipment for, and establish production build to print suppliers for the products it develops. Responsible for the development and verification of flightworthy safety critical electronic circuit cards, FPGAs, and related test equipment. Will work closely with embedded software engineers, mechanical engineers, specialty engineering, and test engineers integrating the software, hardware, and test stations. May also develop automated test capabilities enabling hardware and...