104 management jobs found in Orlando, FL

Description: The E&T Engineering Operations Integrated Supply Management Lead candidate must possess strong management experience and a proven track record of supporting multiple programs across diverse Lines of Businesses. In this role, you will oversee test engineering supplies, stockroom operations, storage, fleet vehicle management, and tool control to ensure seamless test support for numerous projects. You will lead the recruitment, selection, training, performance evaluation, work assignments, compensation, and recognition or disciplinary actions for your team. The ideal candidate possesses the drive, expertise, and collaborative skills needed to partner effectively with cross functional teams and key program stakeholders, delivering technical excellence and mission success. The position requires robust organizational and control expertise to manage integrated supply chain operations and budgets. Ideal candidates will exhibit the initiative and experience to provide...

Description: You will be the Industrial Engineer Sr for the MFC Enterprise Industrial Engineering team. Our team is responsible for applying advanced analytical skills and Industrial Engineering concepts to support Production Operations Management. What You Will Be Doing A couple sentences about the role including a brief scope of it and the team position it’s on using the following format: As the Industrial Engineer Sr you will be responsible for… Your responsibilities will include, but are not limited to: Developing and maintaining simulation and analytical models for production operations. Analyze performance data to identify bottlenecks and improvement opportunities. Support capacity planning and forecasting for S&GS production lines. Collaborate with engineering, logistics, and program teams to integrate model insights. Prepare technical reports and presentations for senior leadership. Why Join Us The ideal candidate thrives in...

Description: Lockheed Martin Missiles and Fire Control in Orlando, Florida is seeking a motivated Early Career Production Test Engineer to join our sensors team. You will support the testing of printed circuit board assemblies / circuit card assemblies (PCBAs / CCAs), electronic subsystems, and sensor pod level system testing, helping to maintain efficient production flows while learning best practices in test development and troubleshooting. In this hands-on role, you will work closely with production technicians, senior test engineers, design engineers, and quality teams to identify and resolve issues, improve test processes, and contribute to first-pass yield goals. Our team is responsible for ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise What You Will Be Doing As the Production Test Engineer, you will be responsible for supporting test systems,...

Description: This position is for the Chief Engineer Manager – Cyber Security & Emerging Technologies (CSET) in the SP AP program area. The role reports to the SP AP Chief Engineer and leads a high impact, cross functional team delivering affordable, secure, future ready solutions in advanced cyber, electromagnetic (EM) warfare, 5G/6G radio frequency (RF), and micro electronics. The successful candidate will work closely with the entire Advanced Programs staff to ensure synergy across teams and to lead/participate in lessons learned communication What You Will Be Doing • Provide technical leadership for the CSET portfolio, setting direction, priorities, and performance targets. • Drive the capture and white paper process, translating emerging technology opportunities into competitive proposals that satisfy RFP requirements. • Own technical risk management, trade off analysis, and affordability metrics, establishing mitigation plans and continuous improvement indicators. •...

Description: The Tactical Infrared Search and Track (TacIRST) Platform‑Expansion Chief Engineer provides technical leadership for the development, integration, and fielding of infrared‑threat‑warning technology across a portfolio of platforms and customers. This position reports to the Advanced Threat‑Warning Systems (ATWS) program‑area Chief Engineer and partners with senior engineers, program managers, and the U.S. Government (USG) customer base to ensure seamless delivery of TacIRST capabilities to multiple air vehicles. The work directly impacts war‑fighter survivability and mission success across services and allied forces. What You Will Be Doing • Provide technical leadership for the TacIRST portfolio – set the overall system architecture and guide end to end integration of hardware and signal processing algorithms. • Drive technical risk management, trade off, and affordability decisions and continuous improvement metrics that keep the program on track. • Partner with the...

Description: Candidate will support the IRST Reliability, Maintainability & Testability team. Program and configurations include, but not limited to IRST F18, Legion, Legion-ES and IRST international. Primary role includes support and development of testability / Built In Test (BIT) concepts, processes, analyses and procedures for the IRST portfolio. Support the system design team to define and influence design for testability to ensure capabilities in the production and field. Support definition of testability requirements, test strategies and test concepts for achieving fault detection and fault isolation objectives to minimize system down time and expedite repairs for production and field. Support refinement of existing Built-In-Test (BIT) architecture concepts, allocate requirements, and mature design functions and features for BIT. Identify opportunities to maximize BIT capabilities to minimize test equipment logistics and support footprint. Support definition of...

Description: You will be the Sr. Program Quality Engineer for the Program Quality team. Our team is responsible for ensuring program quality across Rotary Wing Sensor (RWS) programs. What You Will Be Doing As the Sr. Program Quality Engineer you will be responsible for managing the implementation and execution of program quality requirements throughout development, transition to production, and production efforts. Your responsibilities will include, but are not limited to: Lead implementation of program quality requirements across development, transition, and production phases. Serve as Quality Lead partnering with program teams to identify and mitigate risks. Manage DCMA/customer quality relationships and nonconformance documentation. Drive root cause analysis, corrective and preventive actions, and ensure effective containment. Promote continuous process improvement and product excellence. Why Join Us The ideal candidate is collaborative,...

Description: Lockheed Martin is seeking an experienced IT&E Hardware-in-the-Loop (HWIL) Product Owner to manage the test and integration of advanced HWIL subsystems. The Product Owner is responsible for development and integration of real-time, closed-loop systems to characterize system performance. The team is comprised of engineers working across multiple disciplines. What You Will Be Doing • Product Owner and Primary Technical Point-of-Contact (POC) for the design, integration and test of RF HWIL test capabilities • Integration of UUT HW and testing in a real-time, closed-loop simulation • Design, operate, calibrate, troubleshoot and maintain advanced RF Hardware-in-the-Loop (HWIL) systems, subsystems and components • Provide engineering leadership and guidance to a large group of HWIL engineers • Analyze simulation output and troubleshoot system performance deficiencies • Perform quick-look analysis and data reduction of HWIL simulation output data • HWIL Flight Test...

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at the forefront of cutting-edge technology and engineering. WHAT WE'RE DOING At Lockheed Martin, we're revolutionizing the aerospace and defense sector through groundbreaking technology, advanced manufacturing processes, and a world-class team of professionals. Our mission-driven approach and unwavering dedication to excellence ensure that we continue to deliver superior products and solutions to our customers around the world. At Lockheed Martin Rotary and Mission Systems (RMS), we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach - and yours as...

Description: You will be the Staff Program Quality Engineer for the Rotary Wing Systems Quality Team. Our team is responsible for shaping and safeguarding the quality of sensor products and driving process improvements across Rotary Wing System programs. What You Will Be Doing As the Staff Program Quality Engineer you will be responsible for ensuring the highest quality standards across our rotary‑wing sensor portfolio and driving continuous improvement in our processes. Your responsibilities will include, but are not limited to: Develop and review quality standards, processes, work instructions, and procedures for manufactured and procured products. Collaborate with cross‑functional teams to ensure quality standards are implemented and fully met prior to delivery to our customers. Identify, trend, and resolve non‑conformances in an efficient and timely manner. Lead failure analysis, Material Review Board activities, and corrective‑action processes....

Description: Seeking an FPGA Design Engineer to support RF Sensor Stimulation Hardware-in-the-Loop (HWIL) capabilities. FPGA Engineer to oversee the design, development and implementation of Radio Frequency (RF) signal modulation capabilities in FPGAs. Tasks for this position will include the definition of FPGA architecture, development of VHDL firmware and development of interfaces to ancillary HWIL HW. Also responsible for the integration, test, verification and validation of multiple subsystems. Basic Qualifications: • 8+ years of experience developing FPGA Programmable Logic • Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education • HDL programming experience with VHDL, Verilog, and/or System Verilog • Experience on Hardware-Software Integration and Validation • Familiarity with FPGA toolsets (Vivado, Libero, and/or Quartus strongly preferred) • Experience with electronics design...

Description: You will be the Staff Supplier Quality Engineer for the Supplier Quality Engineering team. Our team is responsible for serving as the primary quality interface between suppliers, internal operations, and program leadership to ensure procured materials meet all contractual, technical, and regulatory requirements. What You Will Be Doing As the Staff Supplier Quality Engineer you will be responsible for driving supplier quality excellence for the Javelin Program. Your responsibilities will include, but are not limited to: Act as the main quality liaison with suppliers and internal stakeholders. Validate that procured materials comply with contractual, technical, and regulatory standards. Conduct supplier audits, assessments, and corrective‑action follow‑ups. Coordinate non‑conformance investigations and drive root‑cause resolution. Maintain accurate quality records and support program leadership with status reporting. Why Join Us...

Description: You will be the Program Quality Engineer for the Program Quality team. Our team is responsible for implementing and executing program quality requirements for Rotary Wing Systems (RWS) programs and ensuring product delivery meets engineering and customer specifications. What You Will Be Doing As the Program Quality Engineer you will be responsible for driving quality excellence across both desk and factory environments for rotary‑wing aircraft sensors. Your responsibilities will include, but are not limited to: Manage the implementation of program quality plans and ensure compliance with engineering and customer requirements. Coordinate multi‑functional interfaces to resolve non‑conformances, containment, root‑cause analysis, and corrective actions. Utilize the Apriso system to document, track, and close non‑conformance records. Analyze production data, generate trend assessments, and recommend actions to improve process and product...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team designs, develops and fields precision engagement aerospace and defense systems, delivering high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical subsystems. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end creation of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will partner with systems, electromechanical, firmware/software and manufacturing groups to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Lead architecture, schematic capture and EPCAD layout for CCAs supporting missile and sensor subsystems. • Define, refine and document system, performance, interface and environmental...

Description: You will be the Senior Signal Integrity / Power Integrity Electrical Engineer responsible for ensuring the electrical performance of high-speed and mixed-signal printed circuit board assemblies across MFC programs. The engineer performs pre- and post-layout SI/PI analysis, defines PCB stack-ups and routing constraints, supports board sign-off, and partners with program design teams as a recognized subject-matter expert. This role contributes to the MFC SI Center of Excellence and helps establish design standards, modeling flows, and best practices that scale across the Circuit Card Design portfolio. What You Will Be Doing You will be responsible for: • Perform pre-layout SI/PI analysis on high-speed interfaces (DDR, PCIe, SerDes, Ethernet, USB) — channel modeling, eye-diagram and jitter budgets, termination strategy. • Define and review PCB stack-ups, controlled-impedance and length-matching rules, and via/breakout strategies in coordination with PCB designers. •...

Description: You will be the HyperLynx Analog Simulation Engineer for the Circuit Card Design Technology Council within Lockheed Martin Missiles & Fire Control (MFC). Our council establishes the simulation standards, reusable model libraries and methodology that power every circuit card assembly (CCA) program across the MFC portfolio, ensuring mission critical hardware is designed with confidence and consistency. What You Will Be Doing As the HyperLynx Analog Simulation Engineer you will be responsible for leading SPICE based analog and mixed signal simulation work, authoring the department’s modeling standards, and partnering with Siemens technical leadership to shape the future of the HyperLynx/Xpedition tool suite. Your work will directly impact hardware designs from concept through verification and will be leveraged by programs for years to come. Your responsibilities will include: • Performing SPICE based analog and mixed signal simulations in Siemens HyperLynx...

Description: You will be the Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied partners, delivering innovative electronic packaging solutions, hands on prototypes, and production ready hardware. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for creating cutting edge electromechanical concepts and delivering production support across multiple defense programs while partnering with a diverse set of cross functional teammates. Your responsibilities will include: • Designing electromechanical systems and components such as circuit card assemblies, harnesses, electronic enclosures and sub assemblies. • Producing detailed mechanical layouts, 3 D models and engineering drawings, selecting appropriate materials, components and manufacturing processes. • Modeling...

Description: You will be the Component Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team is responsible for the full lifecycle of components that power precision engagement aerospace and defense systems, from supplier qualification through delivery to the customer, ensuring reliability, traceability and compliance with strict defense standards. What You Will Be Doing As the Component Engineer you will manage component level risk, coordinate with suppliers and cross functional partners, and drive documentation, qualification and failure analysis activities that keep our programs on schedule and secure. You will act as the technical bridge between design, manufacturing, quality and external customers. Your responsibilities will include • Plan, direct and review all component related project documentation to meet customer contracts and internal LM standards. • Create and maintain Source Control Drawings (SCDs) in accordance...

Description: You will be the Component Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team is responsible for the full lifecycle of components that power precision engagement aerospace and defense systems, from supplier qualification through delivery to the customer, ensuring reliability, traceability and compliance with strict defense standards. What You Will Be Doing As the Component Engineer you will manage component level risk, coordinate with suppliers and cross functional partners, and drive documentation, qualification and failure analysis activities that keep our programs on schedule and secure. You will act as the technical bridge between design, manufacturing, quality and external customers. Your responsibilities will include • Plan, direct and review all component related project documentation to meet customer contracts and internal LM standards. • Create and maintain Source Control Drawings (SCDs) in accordance...

Description: You will be the FPGA Engineer for the Digital Logic Integration team. Our team delivers mission critical hardware and software that connects sensors, actuators and compute platforms across a range of defense programs, ensuring reliable, high performance operation from concept through fielding. What You Will Be Doing As the FPGA Engineer you will capture and translate system requirements into detailed FPGA architectures, drive simulation and verification, and integrate designs with board level hardware. You will work closely with hardware, software and test partners to validate the complete system and lead design assurance activities that keep the program on schedule and compliant with aerospace standards. Your responsibilities will include • Elicit, refine and document functional and performance requirements for FPGA designs. • Create detailed RTL (VHDL/Verilog/SystemVerilog) and accompanying constraints to meet timing, power and reliability goals. • Develop and...