30 program management jobs found in Orlando, FL

Description: You will be the Staff Quality Engineer for the S&GS team. Our team is responsible for applying quality principles to ensure the highest standards of product or process quality for make and/or buy products, spanning design, production control, product evaluation, and research and development. What You Will Be Doing: As the Staff Quality Engineer, you will be responsible for driving quality excellence in all aspects of product development and production, from design to delivery. You will apply technical expertise to evaluate product requirements, specifications, and designs, and collaborate with cross-functional teams to ensure quality standards are met. Your responsibilities will include: -Collaborating with program management, engineering, manufacturing, supply chain, and customers on quality-related issues -Conducting product failure investigations, material review board decisions, and corrective/preventive actions -Developing strategies to improve internal...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the Senior Quality Engineer for the Missiles and Fire Control team. Our team is responsible for delivering world‑class missile and fire‑control systems that meet the highest standards of safety, reliability, and performance. What You Will Be Doing As the Senior Quality Engineer you will be responsible for applying rigorous quality principles across design, production, and sustainment while partnering with cross‑functional teams to drive continuous improvement. Your responsibilities will include, but are not limited to: Collaborating with program management, engineering, manufacturing, supply chain, and customers to resolve quality‑related issues. Leading product failure investigations, material review board decisions, and corrective‑preventive actions. Designing and analyzing inspection and testing processes, including statistical analysis of non‑conforming material. Developing and maintaining statistical dashboards and...

Description: As a Systems Integration & Test Engineer, you will plan and execute the integration and test program. You will develop test documentation, and maintain solutions for the integration and testing of components, elements, subsystems and/or systems. The execution of this program will require this individual to lead/support various Flight Test and Ground Test events as the Certified Test Conductor (CTC) where travel will be required. As a CTC you will lead test efforts, including test equipment specification and system element simulator development, to ensure mission success for Eastern Range Integration. Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems. Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints. Establishes functional and technical...

Description: The Missiles and Fire Control RF Product Center is seeking an experienced Chief Engineer to lead the technical strategy and execution of future Sensor products that will shape the next generation of the MFC and Rotary and Mission Systems (RMS) business areas. This position operates to innovate and develop emerging technologies, products, and investments to define future scalable technical solutions that can be transitioned across programs and into production. The Chief Engineer will partner closely with Product Center leaders to identify, mature, and transition advanced capabilities from concept through operational deployment. This role will help define the technical and capability roadmaps for future Sensor product development while ensuring new capabilities are architected for manufacturability, affordability, reuse, scalability, and long-term sustainment. Success requires balancing technical depth with strategic thinking, working across Lockheed Martin Business...

Description: You will be the Sensors Integration and Test Center (SITC) Quality Engineering Associate Manager for the Orlando, FL team. Our team is responsible for ensuring the highest quality products are delivered to our customers. What You Will Be Doing As the SITC Quality Engineering Associate Manager, you will be responsible for leading a team of Quality Engineers & team members who drive quality excellence on the production floor. Your responsibilities will include: -Leading and developing a team of Quality Engineers in Production Operations -Supporting inspection and developing methodologies to ensure compliance to requirements -Reviewing documentation to ensure internal and external manufacturing processes meet quality standards -Analyzing and resolving process issues, from basic to complex -Leading corrective action meetings and collaborating with cross-functional teams to identify trends and resolve problems -Participating in Material Review Boards and Failure...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: The Staff System Safety Engineer (SSE) is responsible for ensuring that the products developed at LMMFC and sold to the customer are safe for the warfighter to use. A successful candidate will employ safety analysis techniques which will be performed on the end item and its subsystems. The primary job responsibility will be that of performing hazard analysis in accordance with MIL-STD-882 and contractual requirements. The Staff SSE analyzes and recommends safety features and controls for system design, software, training and procedures to mitigate or eliminate hazards. The Staff SSE also performs and supports the development of safety documentation to satisfy customer and contractual requirements. The candidate works with systems and software engineering on architecture definition, use cases and generates software safety analyses in accordance with government guidelines. Expectations are the Staff SSE can work independently with minimal oversight, based on...

Description: You will be the Associate Manager - Program Quality Engineer for the Program Quality Team. Our team is responsible for leading quality initiatives, driving process improvements, and ensuring compliance across the program. What You Will Be Doing As the Associate Manager - Program Quality Engineer you will be responsible for providing leadership to a team of Quality Engineers and overseeing critical quality activities. Your responsibilities will include, but are not limited to: Lead Failure Review Boards (FRBs) and Material Review Boards (MRB) with full authority. Drive root‑cause and corrective‑action analysis for yield improvement. Mentor and train team members, manage work assignments, and assess performance. Lead risk‑mitigation activities, design reviews, and first‑article inspections. Support proposal development and Basis of Estimates (BOE) inputs. Why Join Us The ideal candidate is a collaborative leader who thrives on...

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team designs, develops and fields precision engagement aerospace and defense systems, delivering high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical subsystems. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end creation of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will partner with systems, electromechanical, firmware/software and manufacturing groups to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Lead architecture, schematic capture and EPCAD layout for CCAs supporting missile and sensor subsystems. • Define, refine and document system, performance, interface and environmental...

Description: You will be the Senior Signal Integrity / Power Integrity Electrical Engineer responsible for ensuring the electrical performance of high-speed and mixed-signal printed circuit board assemblies across MFC programs. The engineer performs pre- and post-layout SI/PI analysis, defines PCB stack-ups and routing constraints, supports board sign-off, and partners with program design teams as a recognized subject-matter expert. This role contributes to the MFC SI Center of Excellence and helps establish design standards, modeling flows, and best practices that scale across the Circuit Card Design portfolio. What You Will Be Doing You will be responsible for: • Perform pre-layout SI/PI analysis on high-speed interfaces (DDR, PCIe, SerDes, Ethernet, USB) — channel modeling, eye-diagram and jitter budgets, termination strategy. • Define and review PCB stack-ups, controlled-impedance and length-matching rules, and via/breakout strategies in coordination with PCB designers. •...

Description: You will be the Senior Supplier Quality Engineer (SQE) for the Air‑Launched Rapid Response Weapon (ARRW) team. Our team is responsible for ensuring quality standards are met throughout the development process, from design to production, by collaborating with Engineering, Manufacturing, and suppliers. What You Will Be Doing As the Senior Supplier Quality Engineer (SQE) you will be responsible for driving supplier quality excellence across the ARRW program. Your responsibilities will include, but are not limited to: Develop and lead supplier quality plans and requirements. Conduct supplier audits, assessments, and performance monitoring. Lead root‑cause investigations and corrective‑action initiatives. Partner with engineering and manufacturing to resolve quality issues. Track, analyze, and report quality metrics throughout the product lifecycle. Why Join Us The ideal candidate is a collaborative problem‑solver with extensive...

Description: Lockheed Martin (LM) Missiles & Fire Control (MFC) is seeking a Quality Engineer (QE) for a position based out of Orlando, FL. This program is a fast-paced development environment requiring technical acumen and critical thinking. What You Will Be Doing Responsibilities will include, but are not limited to: • Reviews documentation related to internal and external manufacturing processes to ensure quality products are delivered to the customer. • Supports Integrated Product Teams and various production sites with reviews of quality data on failures, yields, rework, scrap, and non-conformance aging. • Ability to analyze and resolve design, manufacturing, and process issues varying from basic to very complex and technically challenging. • Attending program corrective action meetings, identifying trends, assisting in problem resolution and ensuring responsible parties meet requirements and commitments. • Participating in Material Review Boards and Failure Review...

Description: You will be the Supplier Quality Engineer (SQE) for the Air‑Launched Rapid Response Weapon (ARRW) team. Our team is responsible for ensuring quality standards are met throughout the development process, from design to production, by collaborating with various stakeholders, including Engineering, Manufacturing, and suppliers. What You Will Be Doing As the Supplier Quality Engineer (SQE) you will be responsible for driving supplier quality excellence across the ARRW program. Your responsibilities will include, but are not limited to: Develop and implement supplier quality plans and requirements. Conduct supplier audits, assessments, and performance monitoring. Lead root‑cause investigations and corrective‑action initiatives. Collaborate with engineering, manufacturing, and suppliers to resolve quality issues. Track, analyze, and report quality metrics throughout the product lifecycle. Why Join Us The ideal candidate is a collaborative...

Description: You will be the Quality Engineer for the Program Quality & Supplier Quality team. Our team is responsible for ensuring product quality across production and supplier sites while supporting integrated product teams. What You Will Be Doing As the Quality Engineer you will be responsible for driving quality excellence in a fast‑paced production and development environment. Your responsibilities will include, but are not limited to: Review documentation related to internal and external manufacturing processes to guarantee delivery of quality products. Support integrated product teams and supplier sites by analyzing quality data on failures, yields, rework, scrap, and non‑conformance aging. Analyze and resolve design, manufacturing, and process issues ranging from basic to complex. Identify trends, assist in problem resolution, and ensure responsible parties meet requirements and commitments. Participate in Material Review Boards and...

Description: What We're Doing Do you want to be part of the team that provides training systems for the world's most advanced aircraft – F-35 Joint Strike Fighter? Do you enjoy a dynamic, fast-paced work environment? Join Lockheed Martin's dynamic team working on the cutting edge of aerospace technology. We provide training systems for the world's most advanced aircraft, including the F-35 Joint Strike Fighter. The Work As a key member of our Systems Engineering team, you will: • Perform as a Systems Engineer in the Enterprise Sustainment Solutions Business area • Work within the Automated Test Equipment (ATE) branch on test stations known as LM-CORE and eCASS • Develop requirements from customer proposals and engineering changes • Perform requirements analysis and traceability • Be fluent in the use of DOORs for requirements management • Participate in developing systems architectures • Author performance specifications and interface control documents • Have strong...

Description: About the Role: This position is for a Chief Engineering Senior Manager for the Air-launched Rapid Response Weapon (ARRW) Low-Rate Initial Production contract. The successful candidate will report to the ARRW portfolio chief engineer programmatically and be expected to work closely with the other members of the ARRW chief engineering staff to ensure synergy across tasks and to communicate lessons learned, as well as with the ARRW customer community and the broader ADSW Line of Business. What You Will Be Doing: As the ARRW Production Chief Engineer, you will be responsible for: • Providing technical leadership that enables the team to meet all ARRW production milestones on schedule • Developing and nurturing a productive partnership with the USG customer, the LM partners at LM Aero and LM Space, and the global supply base • Guiding IPT leads and cross-functional teams in program planning, scheduling, execution of production start-up activities, and critical life cycle...

Description: You will be the Mechanical Design Engineer Sr for an Air Dominance program. Our team is responsible for producing design key components of the missile system and associated test equipment. What You Will Be Doing As the Mechanical Design Engineer Sr you will be responsible for the design, development and improvement to mechanical fixtures and automated test equipment for production test. They will also work with a cross-functional team to design, fabricated, and checkout test fixtures and equipment prior for implementation in a production environment. This position supports the Air Dominance Weapon System program in Orlando, FL. Your responsibilities will include: •Developing and generating CREO layouts and detailed drawings for mechanical fixtures used in the production test environment •Building BOMs, creating parts, assemblies, and design documentation of mechanical and electromechanical components and assemblies within Windchill PLM •Supporting &...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the Hardware Engineer for the Air Dominance team within Missiles & Fire Control (MFC). Our team guarantees that every mechanical, electrical, and electronic packaging drawing, model, and specification meets rigorous standards, is production ready, and remains fully traceable in a configuration controlled environment. What You Will Be Doing As the Hardware Engineer you will serve as the independent authority that verifies the integrity, compliance, and manufacturability of all design deliverables for the Air Dominance program. Working closely with engineers, manufacturing, and quality partners, you’ll protect the program’s schedule and performance by catching issues early and championing best practice design standards. Your responsibilities will include: • Performing GD&T analysis and fit check reviews on PTC Creo/Windchill 3 D models and 2 D drawings. • Validating that designs comply with ASME standards, Lockheed Martin MFC Command Media, and...