68 manufacturing engineer senior jobs found

Description SAIC is seeking an experienced Senior Mechanical Manufacturing Engineer to lead the design, development, optimization, and scaling of manufacturing processes for mechanical products and assemblies. This role bridges product engineering and operations, ensuring designs are robust, cost-effective, manufacturable, and capable of meeting quality, safety, delivery, and production-volume requirements. This role is onsite in Huntsville, AL in both office and manufacturing-floor environments. The role may require occasional travel to supplier sites, contract manufacturers, or other company locations. Appropriate personal protective equipment may be required when working in production areas. The ideal candidate combines strong mechanical engineering fundamentals with deep hands-on expertise in machining, fabrication, assembly, tooling, process validation, and continuous improvement within a manufacturing environment. Key Responsibilities Lead the development,...

Description SAIC is seeking Senior Manufacturing Engineer in Middletown, RI to oversee the fabrication of Electro-Mechanical Systems is responsible for managing and optimizing manufacturing processes to ensure the delivery of high-quality, cost-effective, and reliable products. This role requires close collaboration with design engineers to ensure manufacturability, development of efficient production workflows, and management of materials, tools, and equipment. They drive continuous improvement initiatives, focusing on efficiency, cost reduction, and scalability, while maintaining safety standards and aligning project timelines. Effective communication, technical expertise, and leadership are critical to successfully bridging design, production, and quality objectives in this role. Key Responsibilities: Develop, implement, and optimize manufacturing processes to ensure high-quality, repeatable, and cost-effective fabrication of the electro-mechanical system. Develop and...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

About the role The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will focus on involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Manufacturing Engineer is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. The...

Position Summary Odyssey Systems is recruiting for a Senior General/Interdisciplinary Engineer to support the the Air Force Life Cycle Management Center Electronic Systems PEO (AFLCMC/ES). The Electronic Systems System (ESS) Division aka Force Protection Division's mission responsibility is to manage and execute the modernization, design, development, testing, fielding, and sustainment of the various software and hardware within the ESS Portfolio.   This is a full-time position located at Hanscom AFB, MA.                                                                                                                 **Contingent on Contract Award** Responsibilities Duties include, but not limited to:  Design & Architectures Conduct and support all engineering and technical activities required during the material solution analysis, technology, engineering, and manufacturing development, production and...

Description SAIC is seeking an organized and motivated Senior Mechanical Engineer who is looking for an opportunity to grow with our company as we continue to expand our support in the modernization and development of various Marine Air Defense Integration Systems (MADIS) designs as well as supporting production activities out of our Charleston, SC office. The ideal candidate should have experience supporting various projects at all levels showcasing leadership qualities and attributes, as well as project management skills. The candidate should have the ability to discuss projects they have supported and/or led. Candidate should be able to self-manage/self-direct projects, and communicate regularly with customers, engineers, logisticians, and technicians. Job Duties: Must be able to lead multiple high-profile projects which involve interfacing with the customer to define key test requirements, sourcing and interfacing with multiple suppliers / vendors, establishing...

Standard Job Description You will be a Senior Dewar Manufacturing Process Engineer for our team at Santa Barbara Focal Plane Lockheed Martin. Our team is dedicated to delivering world-class technology in the Aerospace and Defense Industry, and we're looking for a talented engineer to join our team. What You Will Be Doing Are you a creative engineer that enjoys manufacturing design, automation development, new product development and sustainment? If so, come join the Dewar Engineering team at Santa Barbara Focal Plane Lockheed Martin. We take the vision of the IR sensor design team and develop the manufacturing build to meet the challenging system requirements our customers demand. You will bring your knowledge of materials, mechanical design, and machining to contribute and grow within a dynamic exciting team environment making world class technology in the Aerospace and Defense Industry. The Senior Dewar Manufacturing Engineer is responsible for sustaining and develop...

Standard Job Description Designs, develops, and implements testing methods and equipment. Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices. Provides test area with parameters for sample testing and specifies tests to be performed. Compiles data and defines changes required in testing equipment, testing procedures, manufacturing processes, or new testing requirements. Responsible for testing all customer samples and for special tests that cannot be performed in the test area. You will be the Test Engineer Senior for the 2nd Shift Test Engineering team. Our team is responsible for delivering high‑quality test solutions that ensure the reliability and performance of electronic systems. What You Will Be Doing   As the Test Engineer Senior you will be responsible for driving test execution, troubleshooting, and continuous improvement of test processes.   Your responsibilities will include, but are not...

Standard Job Description We are Lockheed Martin  We are seeking a highly experienced Principal Project Engineer to lead and manage C130 new development and modernization efforts.  You will function as part of the AMMM Project Engineering team responsible for delivering complex system development products and solutions. What You Will Be Doing As a Principal Project Engineer Manager your responsibilities will include: • Be the technical leader solving new development opportunities or modernized solutions of an integrated and complex system/technical development from concept, through design, implementation, test, manufacturing/deployment and sustainment. • Ensure alignment with Engineering and Technology strategy, business development, program architect, technical feasibility. • Drive planning, technical performance measures, trade studies, risk evaluations, across all Engineering Teams to meet contract cost, schedule, and technical requirements. Lead and manage engineering...

Standard Job Description This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partnership with our Navy Customer! Are you an enthusiastic individual with a strong planning background that can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Englewood or Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? The new Hardware Engineer will support the LE2 program for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: In this dynamic role you will: • Participate in requirements analysis, configuration...

Standard Job Description You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team creates, prototypes and fields high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical defense systems for the United States and allied militaries. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end development of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will work hand in hand with systems, electromechanical, firmware/software and manufacturing partners to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Drive architecture, schematic capture and EPCAD layout for CCAs that support missile and sensor subsystems. • Define, refine and document system, performance,...

Standard Job Description Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications. About the Role The Structural Integrity Engineer (SIE) is a senior technical specialist who analyses, develops, and validates the mechanical integrity of complex structural systems across light‑weight and heavy‑weight platforms. The role encompasses metallic, non‑metallic, and composite materials, covering design,...

Job Description Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications. Be part of a team delivering the next generation of secure military communications satellites for the UK Ministry of Defence. This work provides resilient, high-performance connectivity for the UK, its allies and Defence personnel worldwide, playing a critical role in protecting...

Position Summary Odyssey has an exciting opportunity for a Senior Acquisition Program Materials Engineer supporting Air Force Life Cycle Management Center Agile Weapons Division ARRW program (AFLCMC/EBX ARRW).This position provides the knowledge and experience to efficiently and effectively deliver weapons systems engineering capabilities in support of the acquisition process.   This position is located onsite at Eglin AFB, Florida .  Responsibilities Duties may include, but are not limited to: Assist with the design, development, qualification, and testing of warheads, including mechanical design, manufacturing, energetic fills, and aircraft integration. Support penetration modeling (such as Penetration Curve/PENCURV), fragmentation and penetration performance analysis, fatigue and stress analysis, and insensitive munitions work in accordance with MIL‑STD‑810G and MIL‑STD‑2105C. Provide materials...

Description: You will be the Test Engineer Senior for the 2nd Shift Test Engineering team. Our team is responsible for delivering high‑quality test solutions that ensure the reliability and performance of electronic systems. What You Will Be Doing As the Test Engineer Senior you will be responsible for driving test execution, troubleshooting, and continuous improvement of test processes. Your responsibilities will include, but are not limited to: Resolve and document test anomalies of manufactured electronic circuit boards, cables, flexes, sub‑assemblies, and systems. Maintain test equipment in working order according to requirements and schedules. Prepare, review, refine, and improve test procedures and planning documents. Support test development and integration efforts, collaborating with technicians, quality engineering, and manufacturing engineering teams. Provide technical guidance and mentorship to junior test staff. Why Join Us...

Description: You will be the FPGA Engineer Lead for the ATWS Directed Energy Imaging team. Our team delivers advanced imaging platforms by defining FPGA architectures, developing RTL, validating designs, and fielding production ready hardware that meets stringent performance, cost, and schedule goals. What You Will Be Doing As the FPGA Engineer Lead you will own the end to end development of FPGA solutions and coordinate a multidisciplinary group of systems engineers, software developers, and hardware integrators. You’ll translate system requirements into reliable, high performance hardware while keeping technical risk in check and communicating progress to senior leadership and customers. Your responsibilities will include: • Defining FPGA architecture and creating high quality RTL using AMD/Xilinx Versal and UltraScale+ families. • Driving verification and validation activities, including board level testing and video/signal processing implementation. • Managing task...

Description SAIC is seeking a Senior Electrical Engineer to join in and support our team in Panama City Beach, Florida. JOB DESCRIPTION: You will be working in a dynamic environment at our Holley Engineering and Integration Center. You will be supporting multiple Navy projects of various scales and multiple contracts. You will hone your leadership skills and gain engineering experience rapidly. JOB DUTIES: Use your expertise to provide guidance on a variety of technical projects. Design electrical systems, control systems, equipment and packages. Capture design requirements using MBSE principles. Conduct feasibility studies and testing of new and modified designs. Direct support personnel in the preparation of detailed design, documentation, testing and prototype fabrication. Provide design information to drafting for technical documentation team. Provide direct support to the program manager on technical issues. Prepare variance documentation as...

Description: You will be the Senior Electromechanical Design Engineer for the Missiles & Fire Control (MFC) Hardware Engineering team. Our team designs, develops and manufactures precision engagement aerospace and defense systems for the United States and allied forces, delivering cutting edge electronic packaging, prototype hardware, and production ready solutions. What You Will Be Doing As the Senior Electromechanical Design Engineer you will be responsible for leading electromechanical hardware development on one or more defense programs while collaborating closely with senior leadership, production, quality and customer partners. Your responsibilities will include: • Guiding hardware teams from concept through production to ensure on time, high quality delivery. • Designing electromechanical systems for missile and radar electronics, including CCA/PWB packaging, harnesses, and enclosures. • Creating detailed 3D models, 2 D drawings, and layouts; selecting materials,...

Description: This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partnership with our Navy Customer! Are you an enthusiastic individual with a strong planning background that can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Cape Canaveral FL and be expected to work a flexible 9x80 schedule in the office full-time. *Please note we will not provide relocation services for this position. What does this role look like? As a Hardware Engineer, you will support the LE2 program for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: In this dynamic role you will: • Participate...

Description: This is an exciting opportunity to work on the Fleet Ballistic Missile Program (FBM), a 63-year-old Program with a long-standing history of Mission Success and of a strong partnership with our Navy Customer! Are you an enthusiastic individual with a strong planning background that can thrive in an exciting fast-paced dynamic environment? Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Englewood or Littleton CO and be expected to work a flexible 9x80 schedule in the office full-time. What does this role look like? The new Hardware Engineer will support the LE2 program for Electrical Ground Support Equipment (EGSE). Use your strong electrical engineering skills to work with all project partners and define the future for FBM! Key activities you will accomplish in this role: In this dynamic role you will: • Participate in requirements analysis, configuration determination, design,...