53 applications engineer jobs found

Description: You will be the Opto-Mechanical Engineer– Santa Barbara Focal Plane Infrared Sensors for Lockheed Martin Missiles & Fire Control. Our team creates and implements cutting edge IR sensor technologies, advancing high performance cryogenic focal plane assemblies while sustaining existing production lines. What You Will Be Doing As the Opto-Mechanical Engineer, you will own the end to end mechanical development of infrared sensor hardware. You’ll partner with electrical, systems, test and manufacturing engineers, as well as suppliers, to move designs from concept through pilot builds and into full rate production. Your responsibilities will include • Developing mechanical concepts, solid modeling assemblies, and creating detailed 3 D CAD models. • Performing tolerance stack up, thermal, and structural analyses to verify performance under cryogenic and space flight conditions. • Preparing manufacturing ready drawings, bill of materials (BOMs), and technical data...

Position Summary Odyssey Systems has an exciting opportunity for a Principal  Systems Engineer providing support to the Command, Control, Communications, and Battle Management Division (C3BM).   Command, Control, Communications, and Battle Management (C3BM) has been tasked with delivering an integrated Department of the Air Force (DAF) Battle Network providing resilient decision advantage and enabling the USAF, USSF, Joint, and Coalition Force to win against the pacing challenge. C3BM supports execution in many different focus areas. C3BM’s main efforts are Architecture and Systems Engineering (ASE), Operational Response Team (ORT), and multiple mission integration teams such as Air, Maritime and multiple acquisitions consisting of both the Advanced Battle Management System (ABMS) and Space.   The candidate will provide Systems Engineering assistance that applies a broad theoretical and practical knowledge of system engineering to...

Description: You will be the Systems Engineer Staff - Level 4 for the ADP Systems Engineering team which is responsible for delivering cutting‑edge ADP product solutions across the development lifecycle. What You Will Be Doing As the Systems Engineer Staff - Level 4 you will be responsible for leading systems engineering activities that ensure mission success and technical integrity. Your responsibilities will include: - Developing, decomposing, tracking, and verifying requirements; supporting Functional Configuration Audits and risk assessments. - Providing systems and subsystem integration and test support, collaborating with program management. - Authoring and managing Statements of Work (SOWs) and Engineering Requirements Documents (ERDs) for subcontractors and vendors. - Applying Earned Value Measurement Systems (EVMS) and driving technical leadership across product phases. - Guiding technical planning, supplier specifications, and lifecycle support from development...

Description: You will be the Systems Engineer Principal - Level 6 for the Skunk Works Systems Engineering team which is responsible for delivering cutting‑edge mission systems and shaping next‑generation aerospace solutions. What You Will Be Doing As the Systems Engineer Principal - Level 6 you will be responsible for driving the technical vision of a new Skunk Works product, guiding cross‑functional engineers through requirement development, risk management, and integration. Your responsibilities will include: - Leading requirement decomposition, verification, and Functional Configuration Audits. - Directing risk assessment and abatement activities, ensuring timely mitigation. - Developing supplier specifications, Statements of Work (SOWs) and Engineering Requirements Documents (ERDs) for subcontractors and vendors. - Providing systems and subsystem integration/test support, employing Earned Value Measurement Systems (EVMS) to monitor schedule and cost performance, and...

Description: You will be the Mechanical Design Engineer Staff - Skunkworks for the Skunkworks team which is responsible for delivering cutting‑edge mechanical solutions for advanced aerospace systems. What You Will Be Doing As the Mechanical Design Engineer Staff - Skunkworks you will be responsible for turning complex concepts into flight‑qualified hardware that enables next‑generation missions. Your responsibilities will include: Designing electromagnetic and RF components, including antennas and radomes, to meet stringent performance criteria. Developing support structures and composite/metallic components for high‑stress, flight‑qualified hardware. Creating full‑scale RCS/RF test fixtures and ensuring they are calibrated for accurate data collection. Integrating mechanical designs with classified projects and providing technical support throughout the development lifecycle. Collaborating with cross‑functional teams to validate designs...

Description: You will be the Research Scientist for the ADP SLO team which is responsible for driving engineering support across design and production programs. What You Will Be Doing As the Research Scientist you will be responsible for providing engineering support to production, collecting and analyzing RCS data, and developing sustainment processes. Your responsibilities will include: Collect RCS data using specialized test equipment and interpret results to influence component serviceability. Develop processes and procedures for LO sustainment, including defect and repair effect assessments. Perform Stability‑Over‑Time analysis and contribute to intellectual‑property evaluations and patent applications. Coordinate inter‑departmental activities and research efforts related to materials and coatings applications. Support program decision‑making through data‑driven insights and recommendations. What’s In It For You We are committed to...

Description: We are Lockheed Martin Your Mission is Ours. Instrumentation Operations Engineers are responsible for integrating requirements and programming new instrumentation data acquisition equipment, FTI fiber system, analog and digital signal conditioning hardware during integration and flight test. Works independently or leads a team to execute project, schedule, and technical requirements to meet the goals of the test program. Oversees installation, checkout, and calibration of data systems, to ensure collected data can be properly displayed, processed, and analyzed. Maintains configuration control, and mission capability of the instrumentation system as well as all associated ground support equipment. Responsible for specification, selection, design, integration, operation and maintenance of airborne data acquisition systems, and their related components. This includes telemetry, flight test specific hardware, or prototypes for flight test evaluation. Support...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. If this describes you, come join our team as our next Propulsion Engineer! As responsible...

Description: You will be the Integrated Circuit Layout Designer for the Readout Integrated Circuit (ROIC) design team at Lockheed Martin’s Santa Barbara Focal plane business. Our team delivers world class ROICs that power next generation infrared and visible spectrum imagers for defense, science, and commercial markets. What You Will Be Doing As the Integrated Circuit Layout Designer you will translate high performance analog and digital schematics into robust silicon layouts that meet sub micron, mixed signal VLSI specifications. Working side by side with circuit designers, verification engineers, and process experts, you will turn cutting edge ROIC concepts into manufacturable silicon blocks that enable ultra low noise, low power, high speed imaging. Your responsibilities will include: • Perform full custom physical layout of mixed signal CMOS transistor level designs, including ultra low noise front ends, low power ADCs, and multi GHz SERDES blocks. • Apply Design for...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. The candidate will work with the Program Quality Team supporting Development Quality for...

Description: We are Lockheed Martin The F-35 Integrated Test Force at Edwards AFB, CA is seeking a Discipline Engineer to support current mission planning tasking and to expand the Utilities and Subsystems capabilities for F-35 Developmental Test. Candidate will work directly with the flight test team, pilots, and the Subsystems IPT to plan, execute, and analyze flight test events. Perform post-mission data analysis, lead complex troubleshooting aircraft anomalies, and review and update documentation and instructions to facilitate fielding of vehicle systems components. Job entails aircraft system monitoring and troubleshooting anomalies in real time. Support root cause analysis for off nominal events and generate corrective action recommendations. Provide technical support to test pilots, flight test crews, and maintenance personnel as needed. **Must be a US Citizen. This position is located at a facility that requires special access.** EngineeringAeronautics What’s In It...

Description: You will be the Electrical Engineer for the Lockheed Martin Aeronautics team which is responsible for... What You Will Be Doing As the Electrical Engineer you will be responsible for researching, developing, and defining Electrical Power System (EPS) architecture, schematics, and requirements in close partnership with system engineering and specialist disciplines. Your responsibilities will include: Perform electrical load analysis, verification, and validation to support EPS architecture balance. Design and verify EPS state diagrams and ensure compliance with airworthiness, survivability, and functional requirements. Manage technical supplier interactions, conduct testing, and evaluate power‑quality for generators, converters, batteries, and associated controllers. Develop power‑distribution switching concepts, conduct coordination studies, and select appropriate isolation protection devices. Produce clear technical documentation and...

Description: You will be the Stress Analysis Engineer for the Advanced Development Programs (ADP) which is responsible for delivering groundbreaking aerospace solutions. What You Will Be Doing As the Stress Analysis Engineer you will be responsible for applying advanced analytical techniques to ensure the structural integrity of aircraft components and systems. Your responsibilities will include: Support Production and Sustainment Material Review Board (MRB) repairs to ensure discrepant parts or assemblies meet required strength standards. Perform stress analysis on composite and metallic materials, including sizing of detail parts and assessing the strength of primary and secondary aircraft structures and systems. Certify new and existing designs by performing strength analysis, releasing drawings, and preparing analysis reports. Evaluate and compare structural efficiency and weight for different structural arrangements and concepts through analysis...

Description: Lockheed Martin Space is seeking a full-time Electronics Engineer where you will work as a GNC Hardware Development Tech Lead on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in Sunnyvale CA and will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating...

Description: Lockheed Martin Space is seeking a full-time Electronics Engineer where you will work as a GNC Hardware Development Tech Lead on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in Sunnyvale CA and will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating...

Description: Lockheed Martin Space is seeking a full-time Early Career Electronics Engineer where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment. Location: This position does not support teleworking ; the selected candidate will be located near our Lockheed Martin Space facility in Sunnyvale CA and will be working a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions,...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin Space is seeking a full-time Early Career Materials Engineer in its Sunnyvale Campus in California. In this role, you will work in an engineering materials laboratory developing test plans and performing testing and...

Description: Join us at Lockheed Martin as an ElectroMechanical Engineer where you will be responsible for product design, development, and production support for the Cable and Interconnects team on the Next Generation Interceptor program. Location: This position does not support teleworking ; you will be located near our Lockheed Martin Space facility in: Sunnyvale CA and be expected to work a flexible 9x80 schedule in the office full-time. About Lockheed Martin Space Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are hiring an Infrared Sensor Systems Testing & Integration Engineer at Lockheed Martin, who will support two to three major production programs and several development efforts. Our team delivers high performance infrared sensor solutions for critical defense platforms, and you’ll play a key role in ensuring those systems work reliably from the lab to the field. What You Will Be Doing Your responsibilities will include: • Develop and maintain detailed test plans, procedures, and schedules for infrared sensor hardware. • Set up and operate laboratory equipment such as function generators,...

Description: You will be the Opto-Mechanical Engineer– Santa Barbara Focal Plane Infrared Sensors for Lockheed Martin Missiles & Fire Control. Our team creates and implements cutting edge IR sensor technologies, advancing high performance cryogenic focal plane assemblies while sustaining existing production lines. What You Will Be Doing As the Opto-Mechanical Engineer, you will own the end to end mechanical development of infrared sensor hardware. You’ll partner with electrical, systems, test and manufacturing engineers, as well as suppliers, to move designs from concept through pilot builds and into full rate production. Your responsibilities will include • Developing mechanical concepts, solid modeling assemblies, and creating detailed 3 D CAD models. • Performing tolerance stack up, thermal, and structural analyses to verify performance under cryogenic and space flight conditions. • Preparing manufacturing ready drawings, bill of materials (BOMs), and technical data...