13 systems engineer sr jobs found

Description: You will be the Systems Integration & Test Engineer Sr for the Architecture, Design, Integration & Test (ADIT) – F-35 Sensor Systems Integration & Test (SI&T) team which is responsible for mission system capability integration & maturation, verification testing and regression testing for all F-35 modernization efforts. What You Will Be Doing As the Systems Integration & Test Engineer Sr you will be responsible for technical test planning and execution of the F‑35 Sensor Suite, including Radar, Electronic Warfare (EW), Countermeasures (CM), Electro‑Optical (EO)sensors and Fusion. You will ensure the SI&T process follows prescribed engineering standards and continuously improves those processes. Your responsibilities will include: Generate test plans and detailed test procedure documentation. Coordinate test objectives and execute testing across agile development teams. Conduct system‑level testing in...

Description: You will be the Systems Engineer, Integration and Test Sr for the F-35 Systems Integration and Test (SI&T) team which is responsible for delivering technical infrastructure support that enables hardware and software integration in a lab environment. What You Will Be Doing As the Systems Engineer, Integration and Test Sr you will be responsible for ensuring seamless integration and rigorous testing of F-35 components to support mission‑critical test execution. Your responsibilities will include: Design, configure, and maintain test benches and simulation environments for hardware‑software integration. Develop and execute test procedures, capture data, and analyze results to validate system performance. Collaborate with cross‑functional engineers to troubleshoot integration issues and drive corrective actions. Document test configurations, results, and lessons learned in compliance with program standards. Support continuous...

Description: We are seeking a highly experienced Senior Staff Automated Test Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 12+ years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf...

Description: You will be the Project Engineer Sr - F-22 for the F-22 Airframe Team which is responsible for... What You Will Be Doing As the Project Engineer Sr - F-22 you will be responsible for leading the engineering definition of retrofit, upgrade, and repair initiatives for the F-22 airframe. You will partner with cross‑functional teams to deliver cutting‑edge capabilities that keep the world’s premier fighter at peak performance. Your responsibilities will include: Develop and validate engineering requirements for airframe modifications. Lead design reviews and ensure compliance with flight‑critical standards. Coordinate with manufacturing, test, and sustainment teams to integrate solutions. Manage schedule, risk, and technical documentation throughout project lifecycle. Mentor junior engineers and drive continuous improvement in processes. What’s In It For You We are committed to supporting your work-life balance and overall...

Description: You will be the Project Engineer Staff - F-22 for the F-22 Airframe Team which is responsible for... What You Will Be Doing As the Project Engineer Sr - F-22 you will be responsible for leading the engineering definition of retrofit, upgrade, and repair initiatives for the F-22 airframe. You will partner with cross‑functional teams to deliver cutting‑edge capabilities that keep the world’s premier fighter at peak performance. Your responsibilities will include: Develop and validate engineering requirements for airframe modifications. Lead design reviews and ensure compliance with flight‑critical standards. Coordinate with manufacturing, test, and sustainment teams to integrate solutions. Manage schedule, risk, and technical documentation throughout project lifecycle. Mentor junior engineers and drive continuous improvement in processes. What’s In It For You We are committed to supporting your work-life balance and overall...

Description: You will be the Industrial Engineer Sr (Level 3) for the MFC Enterprise Industrial Engineering team. Our team is responsible for applying advanced analytical skills and industrial engineering concepts to support capacity analyses and future planning using simulation modeling. What You Will Be Doing As the Industrial Engineer Sr (Level 3) you will be responsible for driving capacity simulation initiatives, developing models, analyzing results, and collaborating with cross‑functional stakeholders. Your responsibilities will include, but are not limited to: Design and implement simulation models for capacity forecasting. Analyze simulation outputs to identify improvement opportunities. Collaborate with engineering and operations teams to integrate model insights. Prepare technical reports and presentations for leadership. Maintain and enhance modeling tools and documentation. Why Join Us The ideal candidate is a collaborative...

Description: You will be the Aeronautical Engineer Sr for the Fort Worth Thermodynamics team which is responsible for advancing aircraft thermal performance and reliability. What You Will Be Doing As the Aeronautical Engineer Sr you will be responsible for supporting F 35, Integrated Fighter Group (IFG), and Advanced Development Programs (ADP) Lines of Business in delivering cutting edge thermodynamics solutions. Your responsibilities will include: • Perform Thermal Structural Analysis to ensure integrity under extreme conditions. • Conduct Bay Ventilation Analysis for optimal airflow and temperature control. • Develop and validate Environmental Control Systems (ECS) and Power & Thermal Management Systems (PTMS). • Design and test Thermal Management Systems (TMS) for aircraft subsystems. • Integrate, test, and qualify Thermal Avionics for mission critical performance. What’s In It For You We are committed to supporting your work life balance and overall well being, offering...

Description: Lockheed Martin is seeking an experienced Program Quality Engineer (QE) Sr based in Arlington, TX supporting the PAC-3 MSE Production program. What You Will Be Doing This position requires mechanical or quality engineering experience developing and reviewing quality standards, methods, work instructions and procedures for the inspection of manufactured and procured products. Duties include but are not limited to: · Ensure contractual quality requirements are implemented and verified, along with interfacing with sites daily. · Participate (as required) in failure/diagnosis and Material Review Board (MRB) activities which includes dispositioning non-conforming hardware, identifying hardware containment requirements, identifying appropriate root cause and corrective action is taken to prevent recurrence. · Reading and interpreting engineering requirements, specifications and applying their intent for evaluating acceptance of quality products. · Provide technical...

Description: You will be the Mechanical Design Engineer Sr for an Integrated Air and Missile Defense - Advanced Programs development team. Our team is responsible for designing and producing key components of the missile system, including tactical RF sensor and structural hardware. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating...

Description: We are seeking an experienced Quality Engineer Sr to join the Missiles & Fire Control (MFC) team and enhance our Supply Chain Quality Assurance efforts. In this role you will be responsible for establishing and maintaining the quality framework that governs purchased parts from suppliers, through our manufacturing processes, and ultimately to the customer. What You Will Be Doing As a Quality Engineer Sr supporting Supply Chain Quality in Lufkin, TX, you will drive automation and mistake proofing initiatives across the inbound flow of supplier deliveries—including receiving, receiving inspection, and stock put away processes. You will coordinate equipment maintenance for receiving inspection, provide technical guidance to ensure component compliance, and implement streamlined tools for efficient Supplier Quality task management. Additionally, you will spearhead continuous improvement initiatives to increase the reliability and efficiency of quality controlled...

Description: Lockheed Martin is seeking a Quality Engineer (QE) Sr. for a position in Grand Prairie, TX. What You Will Be Doing As the Quality Engineer Sr - Proposals you will be responsible for leading the implementation and execution of program quality requirements throughout the proposal lifecycle. Your responsibilities will include, but are not limited to: • Understands quality tasks across quality functions including hardware, software, systems, suppliers / sub-contractors, and customers. • Proficient in the areas of proposals, Basis of Estimate (BOE), contract review, program start-up, production, and support. • Collaborate and partner with other functions including Program Manager, Proposal Manager, Contracts, Engineering, Global Supply Chain, Manufacturing, Production and Customers. • Support all program proposals, strategic initiatives, and a variety of projects aimed at improving processes. • Assist in establishing quality budgets and cost commitments. •...

Description: You will be the Project Engineer Sr - F-35 for the F-35 Airframe Control Surfaces and Edges Design Team which is responsible for delivering cutting‑edge capabilities to domestic and international customers. What You Will Be Doing As the Project Engineer Sr - F-35 you will be responsible for guiding the airframe control‑surface and edges design effort from concept through production, retrofit, upgrades, and repairs. “Your responsibilities will include:” Lead cross‑functional teams to define airframe control‑surface requirements and design solutions. Develop and validate engineering approaches for production, retrofit, and upgrade programs. Manage technical documentation and coordinate with suppliers and internal stakeholders. Conduct risk assessments and implement corrective actions for design issues. Support test planning, execution, and data analysis for airframe modifications. What’s In It For You “We are committed to...

Description: You will be the Applications Engineer Sr. - Level 3 for the LM Aeronautics Operations Systems and Modeling team which is responsible for advancing Intelligent Factory initiatives across sites and lines of business. What You Will Be Doing As the Applications Engineer Sr. - Level 3 you will be responsible for linking operational technology (OT) with information technology (IT) to create transformational capabilities that support Lockheed Martin’s 1LMX strategy. Your responsibilities will include: Translate current‑state business processes into future‑state use cases that enable OT/IT integration. Lead project and organizational change management efforts, coordinating across IT, Facilities, Production Operations, Quality, Supply Chain, and Engineering. Maintain and prioritize capability backlogs, quantifying business value for each use case. Produce regular briefings for senior leadership, customer representatives, and industry peers on...