20 systems engineering jobs found

Description Position Overview SAIC is hiring a Part Time Systems Engineer to support the Electromagnetic Expeditionary Electronic Warfare Division at NSWC Crane. This part-time position is intended for an experienced engineer who can provide focused technical support in diagnostics, test execution, troubleshooting, and sustainment engineering. The engineer will work across hardware, software, and subsystem interfaces to support fault detection, failure isolation, and maintainability. The work schedule and hours will be based on program needs and may include test events, troubleshooting, documentation, and technical reviews. Core Responsibilities Support the design, integration, evaluation, and sustainment of BIT/BITE and diagnostic capabilities for mission systems, subsystems, and test assets. Analyze system requirements and translate them into testable diagnostic functions, verification methods, and maintainability features. Support laboratory and field testing,...

Description SAIC is seeking an Electrical Engineer with focus on Radio Frequency principals to support the Expeditionary Electronic Warfare Division at NSWC Crane under the JCREW program. In this role, you will design, integrate, and evaluate RF and electronic warfare technologies, collaborating with multidisciplinary teams to analyze signals, conduct lab and field testing, and deliver key engineering recommendations. Key Responsibilities Support development, integration, testing, and evaluation of RF/EW systems and test infrastructure. Analyze RF hardware architectures, including transmit/receive chains and interfaces. Use lab equipment (spectrum analyzers, VNAs, signal generators) to measure and evaluate signals. Support lab and field testing, handling setup, execution, troubleshooting, and post-test analysis. Perform RF signal analysis, waveform generation, modulation assessment, and RF propagation modeling. Provide recommendations to improve test rigor,...

Description SAIC is seeking a talented and motivated Electrical Engineer with experience in radio frequency (RF), digital signal processing (DSP), and system testing to join our cutting-edge engineering team. The ideal candidate will contribute to the design, development, and testing of advanced systems, including maritime off-board countermeasures and other sophisticated electronic warfare solutions. This role offers the opportunity to work at the forefront of technology, delivering mission-critical innovation for military and defense applications. The selected candidate will engage in activities across the product lifecycle, from initial system and component design to prototyping, testing, and deployment. Job Description: Develop and characterize RF system designs, waveforms, and architectures for use in maritime electronic warfare and off-board countermeasure systems. Design and implement digital signal processing algorithms to detect, process, and mitigate advanced...

Description SAIC is looking for a Senior Energy Storage Engineer to support the US Navy in Crane, IN. This position is 100% remote; however, candidate must be able to travel to Crane, IN approximately twice per month. JOB DESCRIPTION: The Engineer (Systems or Electrical) will provide engineering design, development, and systems integration support for DoW Power & Energy storage shipboard system acquisition programs. Develop program documentation for systems development, testing, implementation, and life cycle management for existing and new power and energy systems. JOB RESPONSIBILITIES: Characterizing large-scale Li-ion battery performance criteria, developing failure modes, test planning, fire mitigation and suppression concepts, prototyping battery-agnostic containment solutions, and evaluating other alternative energy storage system viability Engineering support and requirements development for electrical, mechanical, and system controls and mitigation options for...

Description SAIC is seeking a Senior Electrical Engineer with deep experience troubleshooting and supporting Hardware-in-the-Loop (HWIL) test environments. The selected candidate will play a crucial role in the development, integration, and test of a next-generation Hypersonic Missile System , supporting real-time test operations, electrical diagnostics, and weapon-system-level performance verification. This position requires on-site support at NSWC Crane to enable hands-on work with lab hardware, missile subsystem interfaces, and high-fidelity real-time simulation equipment. Key Responsibilities: HWIL System Troubleshooting & Diagnostics Diagnose and resolve issues within complex HWIL testbeds involving sensors, avionics, embedded computing, and closed-loop weapon-system interfaces Identify root causes related to component failures, degraded signals, hardware performance, or timing anomalies Conduct detailed fault isolation across interconnected hardware,...

Description SAIC is seeking a Test and Evaluation Engineer to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports developmental test and evaluation activities for Electronic Warfare (EW) systems and subsystems across their lifecycle under the SENSEI program. The selected candidate will develop detailed test plans, procedures, and reports to verify and validate system requirements. Additionally, this role involves designing and executing laboratory and field tests, operating RF measurement equipment, and analyzing test data to produce technical assessments. Job Responsibilities: Support developmental test and evaluation (DT&E) activities for Electronic Warfare systems and subsystems across the system lifecycle. Develop detailed test plans, procedures, and test reports to support verification and validation of system requirements. Design, plan, and execute laboratory and field tests, including RF and microwave system testing....

Description SAIC is seeking a Mechanical Engineer to support the US Navy in Crane, IN. JOB DESCRIPTION: You will be part of a collaborative team of engineers and technicians working to support sustainment activities within the Strategic Systems unit at NSWC Crane. This role will be focused on adapting and updating existing assets and infrastructure for the Conventional Prompt Strike missile systems used on the new Columbia/Dreadnaught class submarines. You will primarily work on the Crane Naval Base directly supporting the Government Customer, with occasional trips to SAIC's facility in Bedford, IN. JOB RESPONSIBILITES: Demonstrate strong organizational skills and the ability to work on multiple tasks concurrently with changing deadlines and priorities Interact directly with customers to extract requirements, generate a plan, and report status Prepare Engineering Change Proposals (ECPs) to revise official drawings Conduct Failure Analysis and recommend corrective actions...

Description SAIC is seeking a talented and motivated Electrical Engineer with experience in radio frequency (RF), digital signal processing (DSP), and system testing to join our cutting-edge engineering team. The ideal candidate will contribute to the design, development, and testing of advanced systems, including maritime off-board countermeasures and other sophisticated electronic warfare solutions. This role offers the opportunity to work at the forefront of technology, delivering mission-critical innovation for military and defense applications. The selected candidate will engage in activities across the product lifecycle, from initial system and component design to prototyping, testing, and deployment. Key Responsibilities: Develop and characterize RF system designs, waveforms, and architectures for use in maritime electronic warfare and off-board countermeasure systems. Design and implement digital signal processing algorithms to detect, process, and...

Description SAIC is seeking a motivated and highly skilled Mechanical Engineer to join our team focused on the design, development, and deployment of innovative maritime off-board countermeasure systems. This role offers a unique opportunity to contribute to developing advanced mechanical systems that protect naval vessels from threats. The successful candidate will be a creative problem-solver, applying a strong mechanical engineering foundation to support the system lifecycle, from concept development to production and delivery. Knowledge or experience in maritime domain systems and/or countermeasure technologies is highly desirable. Key Responsibilities: Collaborate with multi-disciplinary teams (engineers, designers, and analysts) to design, develop, and test mechanical systems and components for maritime countermeasure technologies. Participate in all phases of the product lifecycle, including requirements analysis, system design, fabrication, testing, and...

Description SAIC is seeking a Mechanical Engineer to support Specialized Munitions for NSWC Crane, IN. Typical tasking includes engineering/planning for production projects, both short-term tactical planning to long-term strategic planning. Mechanical engineering support includes: Engineering Support - support project development, equipment repair and preventive maintenance support. Tactical Support - develop scope and cost estimates in support of tactical projects. Provide project planning, track progress to schedule, and action item resolution. Strategic Support - prepare cost estimates and provide an assessment to recommend the best alternative. Provide investment recommendations to the Government with high-level cost, schedule, and priority identified. Provide project planning, track progress to schedule, and action item resolution. Operations and Sustainment Support - Provide project management expertise to participate in operations and sustainment planning...

Description SAIC is seeking a Mechanical Engineer in Crane, IN . Support Engineering Investigations (EIs) by analyzing system deficiencies, root causes, and corrective actions. Provide technical troubleshooting support for AN/SLQ-32(V)6 systems, including remote (distance) engineering assistance. Develop system-level knowledge to support fleet issue resolution. Assist in the development, review, and coordination of Engineering Change Proposals (ECPs). Interface with Original Equipment Manufacturers (OEMs) and In-Service Engineering Agencies (ISEAs). Support technical evaluations, impact assessments, and documentation updates related to ECPs. Conduct periodic reviews and updates of existing Maintenance Requirement Cards (MRCs). Develop new MRCs based on engineering changes, system updates, and fleet feedback. Ensure alignment with Navy maintenance standards and system configuration. Support planning and execution of Environmental Qualification Testing...

Description SAIC is seeking a Field Engineer for advanced Airborne Electronic Warfare systems. This position is on-site in Crane, IN. Work will involve working on and around US Navy aircraft in both cold and hot environments. Work environment may be noisy, and employee may be exposed to the smell of aircraft exhaust fumes. Travel may be to CONUS and/or OCONUS locations. When not traveling, candidate will work on-station at NSWC Crane and will help with Fleet Support Team/Depot repair of assets, will write/validate procedures, work with draftsmen to generate drawings, perform Engineering Investigations, assist with Engineering Change Proposals, and respond to fleet requests for information. Qualifications Required Education and Experience: Bachelor's degree in Computer, Electronic, or Electrical Engineering from an ABET accredited university, plus at least four (4) years of experience working in the field Should be familiar with mechanical hand and power...

Description SAIC is seeking an experienced Electrical Engineer to provide non-personal engineering, technical, and program support services to the Naval Surface Warfare Center, Crane Division (NSWC-CR). This position directly supports facility program operations, engineering development, and infrastructure modernization projects across mission-critical facilities. The candidate will collaborate with NSWC Crane technical codes, facility managers, and engineering customers to define requirements, develop designs, and support sustainment activities for electrical and facility utility systems. JOB RESPONSIBILITES: Provide engineering support for facility-related electrical systems including medium- and low-voltage distribution, industrial power systems, and building electrical infrastructure. Develop design criteria, performance specifications, equipment utility requirements, and installation documentation for process equipment and mission facility systems. Prepare Scopes of...

Description SAIC is seeking a Guidance, Navigation, and Control (GN&C) Modeling and Simulation Aerospace Engineer to support hypersonic weapon systems development in Crane, IN. As a critical member of our team, you will help design, model, and validate GN&C systems for hypersonic weapons, with a focus on simulation development, algorithm design, and performance analysis in a mission-critical environment. Your work will directly contribute to optimizing weapon system performance in high-speed and harsh environments. NOTE: This is a hybrid position requiring the candidate to be in office 1-4 times per week. JOB RESPONSIBLITIES: Develop, implement, and refine GNC algorithms for guidance, control, and navigation Support hypersonic weapon system modeling and simulation, including 6 DOF (six degrees of freedom) simulations Perform trajectory analysis, mission performance evaluations, and control system stability assessments Analyze telemetry, flight test data, and...

Description JOB DESCRIPTION : SAIC is seeking a Senior Mechanical Engineer to lead multi-disciplinary engineering teams and projects related to the design, manufacture, and sustainment of US military equipment and systems and other related systems in support of its Indianapolis facility. This position will be a hybrid role with approximately (1-4 days per week onsite) at our Indianapolis, IN facility. JOB DUTIES : May work with teams developing, producing, and sustaining radar and related RF systems, electronic warfare systems, communications equipment and systems, acoustic systems, electro-optic systems, weapon system launch and control systems, test equipment, and other military equipment. Candidate is expected to have mastery in the use and application of technical standards, principles, theories, concepts and techniques for designing mechanical constructs. Candidate is expected to be able to work independently and solve complex engineering problems...

Description SAIC is seeking an Electrical Systems Engineer (EE2) to support the Expeditionary Electronic Warfare Division at NSWC Crane. This position supports RF and electrical engineering for signal communications management and power distribution supporting test and evaluation activities. The selected candidate will design and optimize electrical and electronic test range infrastructure, including wired and wireless communications and fiber-to-cellular towers. Additionally, this role involves managing range power distribution systems, performing power system studies, and testing/evaluating threat devices. Job Responsibilities: Provide RF and electrical engineering support for signal communications management and power distribution in support of MXQT test and evaluation activities. Design, analyze, evaluate, and optimize electrical and electronic test range infrastructure, including wired and wireless communications systems. Manage and support fiber-to-cellular...

Description SAIC is looking for an Electrical Engineer to support the US Navy in Crane, IN. Description of Work: Provide Electrical Engineering to support test and evaluation activities for primary missile batteries. Job Responsibilities: Create test procedures for testing all types of missile battery systems, plan and execute the test procedures, collect, and evaluate the data, and provide the results and conclusions to support various battery designs for all applications, including new prototypes and developmental energy systems Tests shall be generally aging and surveillance, lot acceptance, qualification, and special engineering tests Plans and procedures shall be in accordance with DoD requirements Qualifications Required Education and Experience: Bachelor's degree in engineering and zero years of related experience Required Clearance: Interim Secret Clearance will be required to start with ability to obtain a Secret clearance. SAIC will sponsor...

Description SAIC is seeking a skilled and experienced Journey Level CNC Machinist/Tool and Die Maker to join our dynamic manufacturing team at NAWC Crane, IN. The ideal candidate will be proficient in operating and programming CNC machines, including lathes, mills, and other machining equipment. This position requires a strong attention to detail, excellent problem-solving skills, and a commitment to producing high-quality parts. Key Responsibilities : Set up and operate CNC machines, including lathes and mills, to produce precision parts according to specifications. Interpret blueprints, sketches, and engineering drawings to determine dimensions and tolerances. Advanced level CNC programming of CNC machines using Mastercam and other programming languages. Perform routine maintenance on machines and troubleshoot issues as they arise. Inspect finished products for quality and adherence to specifications, using precision measuring tools such as micrometers and...

Description SAIC is seeking an Electrical Engineer in Crane, IN. Key Responsibilities: Conduct design reviews to assess the functionality and performance of defense electronic systems and ensure adherence to operational requirements. Collaborate on system integration activities to ensure seamless adoption of new or modernized systems into the existing architecture. Lead engineering investigations to analyze and resolve issues impacting system performance in the field. Develop and implement engineering change proposals (ECPs) to improve and modernize legacy systems for optimal efficiency and performance. Assess obsolescence risks of existing components and systems; provide innovative and cost-effective solutions to extend their lifecycle. Work closely with a multifunctional fleet support team to address and resolve complex challenges encountered in fielded systems. Perform circuit analysis and electrical testing to verify performance characteristics and...

Description Are you an Electrical Engineer looking to support an exciting Navy mission in our new state-of-the-art labs? Are you seeking long term career growth and a company that values work life balance? Job Summary: SAIC is seeking an organized and motivated Electrical Engineer who will effectively support a fast-paced work environment with the Naval Undersea Warfare Center (NUWC) Division in Middleton, RI. You will be part of a collaborative team of engineers and support technicians working to bring a variety of electrical designs from the early concept stage all the way through fabrication. SAIC is looking for someone to support the MK710 program here at the SAIC Middletown office. The job will entail a complex/detailed troubleshooting effort along with full redesign engineering effort. Location: The work will be at both 28 Jacome Way, Middletown, RI, and the Naval Undersea Warfare Center (NUWC) Division Newport. Work Schedules: Flexible work schedule...