9 test technician jobs found

Description: This position is for a Mid-level Technician whose primary assignment will consist of engineering hardware fabrication support, troubleshooting, testing and laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 pounds, pushing and pulling of electronic equipment on carts, and working on test stations. These responsibilities will include fabrication of harnesses, electronic/electrical chassis and subassembly panels, mechanical rack fabrication, and various modifications to mechanical racks and electronic test stations using development engineering drawings. Ability to visualize and build electronic racks with minimal defects and little to no supervision. Candidate must be capable of working independently and in a team environment and discussing technical issues with Build Lead. Demonstrated problem-solving and troubleshooting skills, with the ability to analyze technical issues and propose effective solutions....

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and looking for an RF Calibration Engineer to join our team in Dallas, TX. The RF Seeker Calibration Engineer is responsible for the calibration, testing, characterization, and performance validation of Radio Frequency (RF) seekers used in radar-guided systems, such as missiles, drones, or other precision-guided munitions. This role ensures that RF seekers (active, semi-active, or passive radar homing systems) meet stringent accuracy, reliability, and performance requirements through precise calibration procedures, data analysis, and troubleshooting in laboratory, anechoic...

Description: You will be the Test Engineer Senior for the 2nd Shift Test Engineering team. Our team is responsible for delivering high‑quality test solutions that ensure the reliability and performance of electronic systems. What You Will Be Doing As the Test Engineer Senior you will be responsible for driving test execution, troubleshooting, and continuous improvement of test processes. Your responsibilities will include, but are not limited to: Resolve and document test anomalies of manufactured electronic circuit boards, cables, flexes, sub‑assemblies, and systems. Maintain test equipment in working order according to requirements and schedules. Prepare, review, refine, and improve test procedures and planning documents. Support test development and integration efforts, collaborating with technicians, quality engineering, and manufacturing engineering teams. Provide technical guidance and mentorship to junior test staff. Why Join Us...

Description: Test Engineering department designs and fabricates equipment that will be used in the development and manufacture of tactical hardware. We are seeking early career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes. Specific Job Description: Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies. The fabrication of wiring harnesses will require connector pinning, de-pinning, and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas. This position will provide the opportunity for the candidate...

Description: We are seeking a highly experienced Senior Staff Automated Test Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 12+ years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf...

Description: You will be the Pilot Vehicle Interface Design Engineer - Level 4 for the Pilot Systems Engineering (PSE) group – Advanced Development Programs (ADP) which is responsible for designing and delivering innovative pilot vehicle interface solutions for advanced aircraft. What You Will Be Doing As the Pilot Vehicle Interface Design Engineer - Level 4 you will be responsible for shaping next‑generation cockpit mechanisms and ensuring they meet mission needs. This is a non-flying position. Your responsibilities will include: - Researching, designing, and constructing mockups of PVI mechanizations for tactical cockpits and presenting them to customers. - Designing, simulating, and refining PVI solutions for controls, displays, sensors, weapons, and air‑vehicle subsystems. - Collaborating with pilots, engineers, and simulation technicians to implement, evaluate, and document PVI designs. - Providing subject‑matter‑expert support to brief and train test pilots,...

Description: Lockheed Martin Aeronautics. Be More Than You Can Imagine. Who We Are Our products play an important role in the national security of the United States and more than 70 other countries, ensuring peace and stability around the world. Highly trained and specialized personnel and facilities are key to the company's unrivaled success in the aeronautics industry. Our workforce of more than 25,000 has pre-eminent expertise in advanced aircraft design and production, modification and support, stealth technology and systems integration. What You Will Be Doing Test Engineer: The F-35 Manufacturing Test Engineering (MTE) organization hiring three level E2 positions. These positions directly support the F-35 Factory Production line, which is a 24/7 operation. These positions are located at a facility that requires special access and require clearance as indicated below. These positions are 100% on site. Must be able to work the schedules indicated. Schedules will be...

Description: You will be the Pilot Subject Matter Expert (SME) and Pilot Vehicle Interface (PVI) design engineer to serve in the Pilot Systems Engineering (PSE) group on the F-35 team specializing in 5th Generation and Advanced Development Programs (ADP). As the Pilot Subject Matter Expert your responsibilities will include: • Research and design of innovative PVI mechanizations for tactical cockpits. • Provide Pilot SME support to brief and train test pilots, production pilots and training systems engineers and pilots on aircraft capabilities and PVI. • Research, design, simulate, and refine PVI solutions for controls and displays, sensors, weapons, and air vehicle subsystems. • Work with pilots, engineers, and simulation technicians to design, implement, evaluate, and document PVI mechanizations. You will be expected to: • Have a high-level knowledge of 4th and 5th Gen fighters, requiring an understanding of mission systems, capability gaps, and basic concepts of...

Description: Mechanical Engineer to perform hands on production support, research, and product development. Responsible for research, specifications, planning, design, development, and testing of aerospace products. Performs research and/or product development testing encompassing multiple engineering disciplines, such as electrical, and mechanical. This is an opportunity for a Research Engineer to work in the Environmental Test Lab. Basic Qualifications: Knowledge of the fundamental concepts of structural dynamics, random vibration theory, and digital signal analysis. 3+ professional years experience in design, set up, and execute of vibration testing. Knowledge of safety critical testing protocols, hazard analysis methods, and compliance documentation. Ability to obtain a clearance Desired Skills: Knowledge of computer software applications in the Microsoft suite. Experience implementing lean or Six Sigma methodologies to increase test throughput, reduce cycle time, or...