94 jobs found

Description: As a General Maintenance Worker, you will be responsible for performing general maintenance tasks, including carpentry, painting, lawn maintenance, and plumbing activities. You will also operate gardening and grounds care equipment as required and perform operator maintenance on all equipment. • Escort approved visitors throughout the facility • Perform general maintenance of buildings and equipment • Operate gardening and grounds care equipment as required • Perform operator maintenance on all equipment used in the follow through of duties • Assist with equipment turn-in and hand receipt maintenance, as required • Work flexible hours as required by the customer, including weekends and holidays • Work overtime as required Why Join Us This position supports our Special Operations Forces – Global Logistics Support Services contract, which is the U.S. Special Operations Command's (USSOCOM) largest service contract vehicle providing a wide range of tailored...

Description: You will be the Quality Inspector for the SOF GLSS team. Our team is responsible for delivering high‑quality inspection, testing, and sustainment services that support the Special Operations Forces – Global Logistics Support Services (GLSS) contract. What You Will Be Doing As a Quality Inspector your responsibilities will include: • Inspection/verification of electrical/electronic harnesses, components, cables including fiber optics, tubing, aerospace vehicles cables, electrical assemblies such as circuit panels, solder inspections, dimensional check of aircraft assemblies, subassemblies, and installations of harnesses into aircraft for adequate routing during initial modification install to preliminary or released engineering technical documents. To assure all clearances are maintained between tubing, harnesses and structure as required by contractual specifications • Inspection of structural, hydraulic, pneumatic, mechanical, flight control assemblies,...

Description: You will be the Pipefitter/Plumber for Lockheed Martin Missiles and Fire Control (MFC) in Orlando, FL. This position is on our facilities team. What You Will Be Doing As the Pipefitter/Plumber, your responsibilities will include but are not limited to: • Provide mechanical support to manufacturing operations to locate and diagnose trouble in mechanical piping systems and or equipment. • Responsible for the layout, assembly, maintenance and repair of commercial high and low pressure water, gas, steam, oil, and air, waste treatment sanitary and chemical carrying piping systems. • Works both independently and in a team environment. • Repairs faulty components. • Plans the sequence of operation and materials according to design, specifications and materials. • Uses computerized maintenance management systems. • Performs complex calculations and planning. • Hangs steel supports from ceiling joists to hold pipes in place. • Assembles pipe sections, tubing and...

Description: You will be the Mechanical Assembly Inspector for the Quality Assurance team. Our team is responsible for ensuring the quality and integrity of mechanical components and assemblies throughout the product lifecycle. What You Will Be Doing As the Mechanical Assembly Inspector you will be responsible for conducting thorough inspections of mechanical assemblies and ensuring they meet all design and safety standards. Your responsibilities will include, but are not limited to: -Perform a variety of inspection operations of mechanical parts and installations fabricated and/or assembled such as; completed systems, assemblies, tools, jigs, fixtures, prototypes, training devices and detail parts on manufacturing prototype, production development and/or production programs. -Perform inspections utilizing a variety of techniques, inspection equipment and instruments to include visual, layout methods and various conventional types of measurement devices. Why Join Us...

Description: Job Description We are seeking a highly skilled Facilities Mechanical Engineer to join our team, responsible for planning, designing, and overseeing the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities. Our ideal candidate will have an experienced mechanical engineering background with an in‑depth understanding of various mechanical systems, including HVAC, compressed air, vacuum, DI water, plumbing, and site utilities. What You Will Be Doing As a Facilities Mechanical Engineer, you will be responsible for planning, designing, and overseeing facility and equipment modifications, ensuring compliance with company and government restrictions. You will gather and review data to inform design decisions, coordinate with architecture/engineering firms, and prepare estimates for construction and facilities acquisition. You will also inspect construction and installation progress and collect requirements...

Description: You will be the Building Management System Controls Engineer - Level 3 for the Facilities Engineering team which is responsible for designing, programming, and maintaining the largest building‑management control system at Lockheed Martin’s Fort Worth campus. What You Will Be Doing As the Building Management System Controls Engineer - Level 3 you will be responsible for creating and sustaining sophisticated control networks that monitor and regulate HVAC, electrical distribution, fire‑safety, and security across 130 buildings. Your responsibilities will include: Program and configure building automation controllers, sensors, and actuators for HVAC and electrical systems. Troubleshoot system faults, evaluate sensor malfunctions using diagnostic tools, and communicate issues to a wide range of customers. Optimize control logic for chillers and industrial equipment to improve energy efficiency and reliability. Create and modify control...

Description: You will be the Industrial Maintenance Electrician for the Electrical Maintenance Team. Our team is responsible for ensuring reliable operation of industrial electrical systems across the facility. What You Will Be Doing As the Industrial Maintenance Electrician you will be responsible for maintaining, repairing, and improving critical electrical infrastructure. Your responsibilities will include, but are not limited to: Repair, construct, install, troubleshoot, and maintain routine electrical systems and equipment. Cut, thread, bend, couple, and strap conduit; cut wire and conduit to required lengths. Install, repair, or replace switch boxes, light fixtures, plugs, sockets, fuses, and extension cords. Disassemble motors, generators, and other equipment for repair; troubleshoot malfunctions and test for safety and efficiency. Interpret blueprints, drawings, and specifications; use hand tools and voltage‑/amperage‑measuring devices....

Description: WHO YOU ARE Seeking experienced Electricians to support the AN/FSY-3, SPACE FENCE radar site and subsystems. The selected candidate will perform a variety of maintenance and technical support activities on products at the Space Fence radar site on Kwajalein Atoll, Marshall Islands. Job responsibilities include the installation, operation, maintenance, repair, and modification on a wide variety of commercial and industrial electrical systems according to company standards utilizing an energy management system in addition to hands-on work. Selected candidates will analyze and evaluate products and related performance, troubleshoot, and diagnose malfunctions to eliminate problems in minimal time, while maintaining effective customer communications and relations. The team on Kwajalein consists of a small cadre of experienced professionals that work as one cohesive team to accomplish all work at the site. Candidates should also be willing to perform other...

Description: You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a First shift position on a 4x10A work schedule What’s In It...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK • We are seeking a dedicated Systems Installation and Maintenance Technician to join our team. This role involves a range of tasks related to the installation, setup, and maintenance of complex systems and equipment. The ideal candidate will have a strong background in electrical and mechanical systems, with hands-on experience in installation,...

Description: This position is intended to be a development position for eventual Pipefitter/Plumber “A” consideration. Must complete necessary training requirements and on the job experience to be considered for journeyman Pipefitter/Plumber. Installs water, gas, air, oil, steam lines, valves, fittings, and plumbing fixtures after layout has been determined by others. Assists in locating, installing, connecting and testing water distribution, sewer & wastewater lines & other plumbing systems. Repairs, replaces, maintains, or takes other corrective action on such items as broken, leaking or corroded lines, air, water, and gas valves, both above and below ground level. Does repair work on clogged sewer drains and sanitary plumbing equipment. Performs preventive maintenance, routine and periodic functional and performance checks on steam, water, gas, oil, waste treatment and plumbing lines and accessories. Assists journeymen level Pipefitter/Plumber as required and...

Description: About Lockheed Martin Space: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more— we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. -- Lockheed Martin Space is currently looking for a janitor that...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we are inspired by innovation and integrity. We believe that by applying the highest standards of business ethics and creative thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! THE WORK • Execute construction, renovation, rearrangement, and installation projects in support of business needs • Ensure project management controls are managed appropriately and reported accurately • Assure project major milestones are established and maintained through completion. • Make certain that projects meet concepts, plans, statements of work and specification s required to meet customer needs, code requirements, and engineering standards • Collaborate with organizations including Construction Contractors, Maintenance, Environmental Safety and Health, Security, Work Space Management, IT,...

Description: WHAT WE’RE DOING At Lockheed Martin, we are dedicated to advancing engineering excellence to create innovative and reliable structural designs for a diverse range of projects. Our work spans radar system facilities, ground terminal stations, buildings and other support facilities, mechanical systems, power plants, and more. We focus on integrating state-of-the-art technology and precise engineering practices to ensure the success and safety of our products and operations. THE WORK As a Structural Engineer, you will analyze, research, and develop structural engineering specifications, drawings, and calculations for various materials, including metals, concrete, and composites. Your responsibilities will encompass: Developing designs for structures, foundations, buildings, mechanical and hydraulic systems, power plants, and more. Calculating accurate cost analyses for both design and construction phases of projects. Applying principles from UFC (Unified...

Description: Follow machine assembly drawings, manufacturer’s manuals, general instructions, and standard practices to locate source of trouble, disassemble, repair, adjust, align, replace and/or install parts, and reassemble, ensuring safe operation of complex CNC machinery. Repair and adjust mechanical, hydraulic and pneumatic equipment and parts, install new units or fixtures on machines, and make modifications or alterations in accordance with instructions or manufacturer’s specifications and directions. Perform other machine maintenance and repair operations where trouble may be difficult to locate and clues can be given relative to symptoms and component or part requiring attention. Assist higher-grade mechanics with more difficult repair operations. Make up brackets, straps, and other simple parts. Lubricate, clean, inspect, and perform other preventative maintenance operations per manufacturer’s specifications and standard procedures to maintain machines and...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we are inspired by innovation and integrity. We believe that by applying the highest standards of business ethics and creative thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! THE WORK The Second Shift Maintenance Supervisor is responsible for leading and supporting a multi-discipline maintenance team during second shift operations. This role ensures that preventative and corrective maintenance activities are effectively executed during off-hours to prepare the site for next-day operations. The supervisor drives accountability, prioritizes work, responds to emergent issues, and maintains a safe, customer-focused maintenance environment supporting both facilities and manufacturing operations. Key Responsibilities: Lead and supervise a team of maintenance technicians...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we are inspired by innovation and integrity. We believe that by applying the highest standards of business ethics and creative thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! THE WORK Plans utilization of office space with requirements of organizational efficiency, and available facilities and funds. Plans, coordinates, and allocates office space for all locations. Develops and recommends long-range plans to meet future office space needs. Formulates, recommends, and ensures compliance with approved standards and policies relating to office space and furnishings. May provide liaison with owners of rented office space in matters relating to planning and execution of alterations/leasehold improvements, occupancy, and adherence to lease allowance and terms. Develops...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. OCCUPATIONAL SUMMARY Perform non-destructive evaluation of materials, weldments, fabricated parts and assemblies through the use of non-destructive techniques (including ultrasound, magnetic particle, dye penetrant) and precision mechanical measurement devices (optical comparators, surface plates, gage blocks etc.). Interpret radiography reports and evaluate NDE services rendered by outside contractors. Inspect intricate machined parts, tooling fixtures, templates, patterns and gages used in fabrication of new, developmental and/or mock-up assemblies for conformance to specifications, workmanship, dimensional accuracy and blueprints. Train and certify inspectors and technicians in special skills as soldering, surface mount, crimp,...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. Witness conformance to testing requirements for all tests which utilize electrical, electronic, mechanical, pneumatic, hydraulic and environmental equipment required to simulate conditions encountered during operations; compare accumulated data with specified requirements and accept those tests which prove product systems, subsystems, and assemblies. Inspect associated parts, and assemblies for conformance to blueprints, inspection standards, specifications, and certified processes. Perform Quality Assurance (QA) tasks during handling, processing and testing of ordnance assemblies and subassemblies. Inspect the installation and hookup of test devices, support equipment, test complexes and recording/control instrumentation used to...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. Independently determine and perform the corrective action necessary for continued operation of electro-mechanical equipment, machinery, systems, controls, circuits and associated devices including, but not limited to: radio controls, lasers, vibration, environmental, vacuum, welding, processing, production, microelectronics and wafer fabrication, microprocessor/computer controlled systems, and machine tools, with associated peripherals. Rework, service, maintain, modify, troubleshoot and repair industrial electro-mechanical equipment, systems, controls, circuits and associated devices with or without prints and schematics. Use all necessary tools, test equipment and instruments, machinery, software patches and diagnostics to facilitate operational...