13 jobs found in Cape Canaveral, FL

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. Witness conformance to testing requirements for all tests which utilize electrical, electronic, mechanical, pneumatic, hydraulic and environmental equipment required to simulate conditions encountered during operations; compare accumulated data with specified requirements and accept those tests which prove product systems, subsystems, and assemblies. Inspect associated parts, and assemblies for conformance to blueprints, inspection standards, specifications, and certified processes. Perform Quality Assurance (QA) tasks during handling, processing and testing of ordnance assemblies and subassemblies. Inspect the installation and hookup of test devices, support equipment, test complexes and recording/control instrumentation used to...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. Witness conformance to testing requirements for all tests which utilize electrical, electronic, mechanical, pneumatic, hydraulic, optical and environmental equipment required to simulate conditions encountered during operations; compare accumulated data with specified requirements and accept those tests which prove product systems, subsystems, and assemblies. Inspect vehicle and support equipment parts, and assemblies for conformance to blueprints, inspection standards, specifications and certified processes. Perform Quality Assurance (QA) tasks during handling, processing and testing of ordnance assemblies and subassemblies. Inspect the installation and hookup of test devices, support equipment, test complexes and recording/control...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. OCCUPATIONAL SUMMARY Perform non-destructive evaluation of materials, weldments, fabricated parts and assemblies through the use of non-destructive techniques (including ultrasound, magnetic particle, dye penetrant) and precision mechanical measurement devices (optical comparators, surface plates, gage blocks etc.). Interpret radiography reports and evaluate NDE services rendered by outside contractors. Inspect intricate machined parts, tooling fixtures, templates, patterns and gages used in fabrication of new, developmental and/or mock-up assemblies for conformance to specifications, workmanship, dimensional accuracy and blueprints. Train and certify inspectors and technicians in special skills as soldering, surface mount, crimp,...

Description: This position is for a Senior Facilities Engineer supporting Lockheed Martin operations in a production environment at the NASA Kennedy Space Center in Florida. This individual will participate in management of calibration and precision cleaning as well as maintenance and repair of Orion mechanical ground support equipment at KSC. Responsibilities will also include working extensively in SAP software to ensure service orders, production orders, work orders, maintenance notes that capture problems or corrective action, and strategies are developed, released, dispositioned and closed. Individual will also be required to generate electronic material requests and track material receipts. Basic Qualifications: • Experience managing maintenance of Mechanical Ground Support Equipment • Experience with documenting and disposition of failed or non-conformance equipment • Experience with fluid systems (liquids and gases) • Ability to effectively communicate and...

Description: You will be the Mechanical/Electrical controls mechanic. From ultra-precision machining and additive manufacturing to the development and production of complex optical components and sophisticated electronic systems, Lockheed Martin Missiles and Fire Control (MFC) utilizes the latest capabilities in manufacturing to produce some of the world's most advanced weapon and sensor technology. What You Will Be Doing As the CNC Maintenance Mechanic, your responsibilities will include but are not limited to: • Analyzing, troubleshooting and repairing a variety of CNC and multi-purpose mechanical and/or electromechanical control systems for industrial and precision equipment. • Testing and analyzing malfunctions, modifies, repairs, adjusts and maintains mechanical portions of automatic control instruments and related recording devices used in the operation of industrial manufacturing equipment. • Operating machine through necessary cycles to check mechanical portion of...

Description: You will be the Research Librarian for the Library Services team. Our team is responsible for delivering high‑quality reference and research support to our stakeholders. What You Will Be Doing As the Research Librarian you will be responsible for providing reference and research information services using a variety of resources, including online databases, periodicals, corporate materials, and government documents. Your responsibilities will include, but are not limited to: Analyze, organize, package, and present research results to meet user needs. Promote library services through presentations, training sessions, and marketing campaigns. Assist with circulation, collection development, and ongoing maintenance activities. Perform work in a professional office environment, initially onsite before transitioning to part‑time telecommute (<50%). Why Join Us The ideal candidate is a proactive, detail‑oriented professional who...

Description: You will be the Industrial Electrician for the Industrial Services team. Our team is responsible for maintaining plant power systems, performing medium‑ and low‑voltage electrical installations, repairs, and maintenance that support new builds and existing facilities. What You Will Be Doing As the Industrial Electrician you will apply your commercial/industrial electrical expertise to install, service, and troubleshoot a wide range of plant equipment while ensuring compliance with the National Electrical Code (NEC) and NFPA standards. Your responsibilities will include: Install, repair, and maintain medium‑ and low‑voltage power distribution, motor control centers, generators, transformers, ATS units, and lighting controls. Read and interpret electrical blueprints, schematics, and work orders to execute accurate installations and modifications. Perform preventive and corrective maintenance on motors, pumps, cranes, hoists, fire‑suppression...

Description: You will be the CNC Control Tech for the Advanced Manufacturing team. Our team is responsible for producing ultra‑precision machining, additive manufactured parts, complex optics, and sophisticated electronic systems for the world’s most advanced weapons and sensor technologies. What You Will Be Doing As the CNC Control Tech you will diagnose, repair, and optimize high‑performance CNC and electro‑mechanical control systems, ensuring machines operate within tight tolerances. Your responsibilities will include: Troubleshooting and repairing CNC control hardware and associated electro‑mechanical components. Reading schematics, wiring diagrams, and machine manuals to understand system design and operating requirements. Designing and conducting functional and operational tests to isolate faults. Making critical adjustments to component values and settings to align and tune sensitive circuits and mechanisms. Installing new...

Description: What You Will Be Doing As the Facilities Design and Construction Manager you will be responsible for directing all phases of design and construction projects, from concept through completion, and serving as the primary liaison with local building and fire officials. Your responsibilities will include, but are not limited to: Lead a multidisciplinary team of engineers, estimator, and contractors to deliver projects up to $50M on schedule and within budget. Oversee the on-site A/E contractor and Construction contractor Ensure compliance with the Florida Building Code and other regulatory requirements. Create and execute strategic plans for renovation, expansion, and new construction efforts. Provide facility input for Programs and Functional teams to support their business. Manage resource allocation, staffing assignments, and performance expectations. Identify technical issues, propose solutions, and communicate impacts on cost,...

Description: You will be the CNC Control Tech for the Advanced Manufacturing Team. Our team is responsible for ultra‑precision machining, additive manufacturing, and the development of complex optics and sophisticated electronic systems for Lockheed Martin Missiles and Fire Control. What You Will Be Doing As the CNC Control Tech you will diagnose, repair, and optimize high‑performance CNC and electromechanical control systems that keep our advanced manufacturing equipment running. Your responsibilities will include, but are not limited to: Troubleshooting and repairing CNC control hardware and associated electromechanical components. Reading schematics, wiring diagrams, and machine manuals to understand system design and operating requirements. Designing and conducting functional tests to isolate faults and verify tight tolerances. Making critical adjustments to align and tune sensitive circuits and mechanisms. Installing new equipment, performing...

Description: You will be the Mechanical and Tool Inspector for the Missiles and Fire Control team. Our team is responsible for producing some of the world's most advanced weapon and sensor technology through ultra-precision machining, additive manufacturing, and the development of complex optical components and sophisticated electronic systems. What You Will Be Doing As the Mechanical and Tool Inspector, you will be responsible for performing in-process / courtesy / quality witness / final inspections on machined parts, electro-mechanical, mechanical, composite, integrated systems and various coatings including chemical conversion coating, military grade primer / paint, powder coat and anodize. Your responsibilities will include: Performing in-process / courtesy / quality witness / final inspections on machined parts, electro-mechanical, mechanical, composite, integrated systems and various coatings. Inspecting mechanical assemblies utilizing Coordinate...

Description: You will be the CNC Maintenance Mechanic for the Controls Team. Our team is responsible for ultra‑precision machining, additive manufacturing, and the development of complex optical and electronic systems for Lockheed Martin Missiles and Fire Control. What You Will Be Doing As the CNC Maintenance Mechanic you will be responsible for maintaining and repairing CNC and electromechanical control systems that keep our advanced manufacturing equipment running. Your responsibilities will include, but are not limited to: Analyzing, troubleshooting, and repairing CNC and multi‑purpose electromechanical control systems. Testing, adjusting, and maintaining mechanical portions of automatic control instruments. Operating machines through required cycles to verify mechanical and electronic specifications. Performing incidental welding in conjunction with normal maintenance activities. Setting up precision test tools and conducting detailed...

Description: You will be the In-Process Build Inspector for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for ensuring the quality and functionality of electrical, electronic, and mechanical systems, among others, to meet company and customer requirements. What You Will Be Doing As the In-Process Build Inspector you will be responsible for conducting in‑process inspections that verify assemblies meet engineering specifications and performance standards. Your responsibilities will include, but are not limited to: Perform detailed inspections of electrical, electronic, and mechanical components during build. Compare work against drawings, specifications, and test data. Document findings and generate non‑conformance reports. Collaborate with engineers and production staff to resolve quality issues. Support continuous‑improvement initiatives to enhance product reliability. Why Join Us The ideal candidate...