12 assembler jobs found

Quality Assurance Inspector Specialist - 2nd Shift Job Description : You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to...

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. This position is located at a facility that requires special access. Must be a U.S. Citizen. Basic Qualifications: - Electronic Circuit Card experience or equivalent technical proficiency. - Quality...

Position: Component Quality Inspector Job Description: What You’ll Be Doing ● Responsible for inspecting assembled product to ensure adherence to documented requirements. ● Complete physical inspections of product. ● Audit against documents and procedures. ● Provide recommendations to processes and procedures. ● Other duties as assigned. ● Entry level job with no prior relevant training or work experience ● Acquires basic skills to perform routine tasks ● Work is prescribed and completed with little autonomy ● Has no discretion to vary from established procedures ● Works with either close supervision or under clearly defined procedures What We Are Looking For For warehouse jobs: Typically requires 2 - 5 years of experience. What’s In It For You At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans, and a solid...

Description: You will be the Mechanical and Tool Inspector for the Missiles and Fire Control team. Our team is responsible for producing some of the world's most advanced weapon and sensor technology through ultra-precision machining, additive manufacturing, and the development of complex optical components and sophisticated electronic systems. What You Will Be Doing As the Mechanical and Tool Inspector, you will be responsible for performing in-process / courtesy / quality witness / final inspections on machined parts, electro-mechanical, mechanical, composite, integrated systems and various coatings including chemical conversion coating, military grade primer / paint, powder coat and anodize. Your responsibilities will include: Performing in-process / courtesy / quality witness / final inspections on machined parts, electro-mechanical, mechanical, composite, integrated systems and various coatings. Inspecting mechanical assemblies utilizing Coordinate...

Description: You will be an Aircraft Electrician I for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community. What You Will Be Doing As an Aircraft Electrician I, you will be responsible for: • Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft. • Remove and install aircraft components as required. • Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. • Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. • Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. • Comprehend documents such as safety...

Description: The Payload Launch Sites Support Services (PLSSS) Program within SSC provides launch processing support functions for the Office of Space Launch (OSL). One of the program’s two primary operating locations is Cape Canaveral Space Force Station, FL. Key elements of the PLSSS program scope include satellite launch processing, satellite transport operations, satellite propellant loading operations, clean room operations, satellite processing and support facilities O&M, and safety and environmental services. Basic Qualifications: • Hold a Journeyman or Master Electrician license with high voltage experience up 13.2 volts 3 phase • Be a US Citizen able to obtain a TS/SCI w/Poly Desired Skills: • Experience installation, maintaining and repairs on 3-phase switchgear, motor starters, PLCs (programmable logic controllers), VFDs (variable frequency drives), Pumps, Automatic Transfer Switches (ATS), 480V/277V-208V/120V Distribution Panels, Lightning, Generators, and...

Description: You will be the In-Process Build Inspector for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for ensuring the quality and functionality of electrical, electronic, and mechanical systems, among others, to meet company and customer requirements. What You Will Be Doing As the In-Process Build Inspector you will be responsible for conducting in‑process inspections that verify assemblies meet engineering specifications and performance standards. Your responsibilities will include, but are not limited to: Perform detailed inspections of electrical, electronic, and mechanical components during build. Compare work against drawings, specifications, and test data. Document findings and generate non‑conformance reports. Collaborate with engineers and production staff to resolve quality issues. Support continuous‑improvement initiatives to enhance product reliability. Why Join Us The ideal candidate...

Description: Determines routing of wires and conduits and determines location and method of installing such electrical units as switches, outlets, junction boxes, rectifiers, transformers and generators on electrical parts of all building facilities branch circuits feeding machine tools and other fixed equipment. Installations shall guided by trade practice, blueprints, wiring diagrams and state, municipal and underwriters' specifications, codes and ordinances. Determines advisability or need for repair or replacement with a new unit, best and safest method of restoring interrupted service and necessity and type of scaffolding to use. Computes wire gauge, power and load limit requirements when this information is not furnished using charts and handbooks considering such factors as amperage, load and distance to power supply. Installs, tests, troubleshoots, and maintains such equipment as large three phase motors, transformer banks, welding generators, panels having several...

Description: This occupation requires the inspection of structural/electrical/plumbing assemblies, sub-assemblies, bench assemblies, functional installations, and components for workmanship and conformance to requirements; the final assembly and mating of airplane structural components; installations of Functional units and systems; shakedown and operational checkout of the completed airplane and component assemblies from production and prior to flight line. Rejects unacceptable items and prepares documentation for their disposition. Inspects the sealing operations performed on new or completely stripped, modified and resealed integral wing tanks in tank seal building, including all related structural and functional installations contained for conformance to applicable designs and specifications and rejects and dispositions unacceptable items. Inspects final washing, priming, painting, and internal trimming operations performed on completed production and modification aircraft to...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Uses predetermined methods, operations, setups and prescribed specifications to inspect...

Description: Perform visual inspection and testing operations on aircraft electrical and electronic systems. Follow general instructions, standard inspection procedures, engineering drawings, engineering specifications, check sheets, and other written or oral instructions to perform standard electrical inspection and testing operations. Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly/inspection operations and test requirements. Inspect systems and components for physical conditions, proper identification, completion and installation of all parts and assemblies, satisfactory workmanship. Check for broken strands in wiring, sufficient strain relief, proper mechanical connection, identification, and condition of plugs, wiring, and insulation. Conduct high potential and insulation resistance test on fuel gage wiring antenna cables, as occasion requires. Document Non-Conformances utilizing Electronic Documentation System (Solumina) on...

Description: As a member of the SOFGLSS Lockheed Martin Team supporting the warfighter the Aircraft Mechanic II performs installation, adjustment, alignment and troubleshooting for final operational and functional testing on major aircraft weapon systems, assemblies and components for the C-130 aircraft. What You Will Be Doing As an Aircraft Mechanic II, you will be responsible for: • Inspects, troubleshoots malfunctions, rigs, repairs and modifies aircraft structures, structural components and aircraft systems of moderate difficulty. • Maintains and repairs aircraft components including but not limited to landing gear, flight surfaces and controls, anti-icing, engines, hydraulics, pneumatics, fuel systems, ventilation, heating and cooling systems and mechanical components. • Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. • Applies required expertise in restoring equipment condition and or operation; applies...