25 electronics jobs found

Description: Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey! The Electronics Test/Assembly Inspector provides intermittent and final inspections and test support for electronics manufacturing: circuit boards, wire harnesses, battery, microelectronics (RF/hybrids), and electronic box assemblies. Additionally, the Inspector provides witness test, connector mate/demate and torque applications, prepares paper and electronic documentation on nonconforming hardware, interprets drawings, schematics, sketches, specifications and standards, and works from manufacturing work instructions and provides surveillance when needed. This position is located at a facility that requires special access. Must be a U.S. Citizen. Basic Qualifications: - Electronic Circuit Card experience or equivalent technical proficiency. - Quality...

Description: You will be an Aircraft Electrician I for our Special Operations Forces Global Logistic Support Services (SOF GLSS) team, based in Crestview, FL. Our team is responsible for modifying military aircraft and ground vehicles to meet the evolving operational needs of the SOF community. What You Will Be Doing As an Aircraft Electrician I, you will be responsible for: • Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft. • Remove and install aircraft components as required. • Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. • Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. • Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. • Comprehend documents such as safety...

Position: Component Quality Inspector Job Description: What You’ll Be Doing ● Responsible for inspecting assembled product to ensure adherence to documented requirements. ● Complete physical inspections of product. ● Audit against documents and procedures. ● Provide recommendations to processes and procedures. ● Other duties as assigned. ● Entry level job with no prior relevant training or work experience ● Acquires basic skills to perform routine tasks ● Work is prescribed and completed with little autonomy ● Has no discretion to vary from established procedures ● Works with either close supervision or under clearly defined procedures What We Are Looking For For warehouse jobs: Typically requires 2 - 5 years of experience. What’s In It For You At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans, and a solid...

Position: Equipment Maintenance Technician I Job Description: The Equipment Maintenance Technician I is responsible for performing routine maintenance, troubleshooting, and repair of equipment and machinery to ensure optimal performance and minimize downtime. This entry-level position requires a hands-on approach to maintaining equipment in accordance with company standards, safety protocols, and operational requirements. The technician will work under the guidance of senior maintenance staff and supervisors to develop technical skills and gain experience in equipment maintenance. Fully In Office: Monday-Friday (12am - 8:30 am) Must be able to work overtime when needed. Must be able to do a temporary change of shift as needed for business needs. What You'll Be Doing:   Troubleshoot and repair all equipment Troubleshoot and repair programming adapters Troubleshoot and repair down to component level Preventive Maintenance Hardware and software computer...

Basic Qualifications Bachelor's degree in Electrical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Electrical Facilities Design Lead Position Overview As the Electrical Facilities Design Lead , you and your team will be responsible for guiding multiple electrical facilities subsystems and their components from concept to final installation in a program that introduces...

Description: Perform visual inspection and testing operations on aircraft electrical and electronic systems. Follow general instructions, standard inspection procedures, engineering drawings, engineering specifications, check sheets, and other written or oral instructions to perform standard electrical inspection and testing operations. Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly/inspection operations and test requirements. Inspect systems and components for physical conditions, proper identification, completion and installation of all parts and assemblies, satisfactory workmanship. Check for broken strands in wiring, sufficient strain relief, proper mechanical connection, identification, and condition of plugs, wiring, and insulation. Conduct high potential and insulation resistance test on fuel gage wiring antenna cables, as occasion requires. Document Non-Conformances utilizing Electronic Documentation System (Solumina) on...

Basic Qualifications General Dynamics Mission Systems (GDMS), a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to our customers.   Responsibilities for this Position General Dynamics Mission Systems (GDMS), a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to our customers.   SUMMARY:   Install, maintain and repair all types of electrical, incidental electronics, and mechanical equipment to achieve program and business objectives in a timely and quality manner.   ESSENTIAL DUTIES AND RESPONSIBILITIES:   (Including the following, but are not limited to)  Maintain and repair electrical equipment and installation, modify and /or make repairs to electrical and mechanical parts to correct operational deficiencies. Carryout a preventive maintenance program for equipment involved in...

Standard Job Description You will be the Quality Assurance Inspector for the F-16 Sustainment Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a Second shift position on a 4x10A work schedule...

Standard Job Description You will be the Quality AssuranceLead Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a Second shift position on a 4x10A work schedule...

Standard Job Description You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to work a First Shift position on a 4x10A work schedule...

Description SAIC is seeking an experienced Vehicle Mechanic at Marine Corps Base Hawaii . This role involves maintenance and operations on Medium and Light Tactical Vehicle Platforms in support of Naval Surface Warfare Center (NSWC) Crane tasking portfolio. JOB DESCRIPTION: Identify and replace components and conduct functional tests to return articles to service; document maintenance and inspection actions. Review technical documentation to identify planned maintenance action requirements. Review and implement service advisory/service bulletins; and provide analysis and recommendations for changes and improvements to equipment installation, operation, modification, and maintenance for equipment. Support all vehicle systems to include communication, engine repair, automatic transmission, manual transmission, suspensions, brakes, electronic systems, heating and air, and ancillary system and subsystems. Note: This position requires someone...

Description SAIC is looking for a Mobility Field Service Rep in Okinawa, Japan to support our Combat and Strategic Systems Operation in supporting 2nd and 3rd echelon maintenance, and Operator/Maintenance Training on the Medium and Light Tactical Vehicle Platforms in support of Naval Surface Warfare Center (NSWC) Crane tasking portfolio. JOB DESCRIPTION: Identify and replace components and conduct functional tests to return articles to service; document maintenance and inspection actions; review technical documentation to identify planned maintenance action requirements; review and implement service advisory/service bulletins; and provide analysis and recommendations for changes and improvements to equipment installation, operation, modification, and maintenance for equipment. Support all vehicle systems to include communication, engine repair, automatic transmission, manual transmission, suspensions, brakes, electronic systems, heating and air, and ancillary system...

Description SAIC is looking for a Mobility Field Service Rep in Camp Pendleton, CA to support our Combat and Strategic Systems Operation in supporting 1st and 2nd echelon maintenance, and Operator/Maintenance Training on the Medium and Light Tactical Vehicle Platforms in support of Naval Surface Warfare Center (NSWC) Crane tasking portfolio. JOB DESCRIPTION: Identify and replace components and conduct functional tests to return articles to service; document maintenance and inspection actions; review technical documentation to identify planned maintenance action requirements; review and implement service advisory/service bulletins; and provide analysis and recommendations for changes and improvements to equipment installation, operation, modification, and maintenance for equipment. Support all vehicle systems to include communication, engine repair, automatic transmission, manual transmission, suspensions, brakes, electronic systems, heating and air, and ancillary...

Quality Assurance Inspector Specialist - 2nd Shift Job Description : You will be the Quality Assurance Inspector for the F-16 Production Team. Our team is responsible for inspecting and validating mechanic work and processes. What You Will Be Doing As a Quality Assurance Inspector you will be responsible for the following tasks: - Use predetermined methods to validate in-process and completed product such as electronic, mechanical, structural, and powerplant units and subsystems. - Utilize blueprints, diagrams, and technical orders to validate specifications and assembly build-up. - Utilize dial indicators, preset micrometers, scales, fixtures, and borescopes to evaluate aircraft/part serviceability. - Work with the customer to present validated work for their approval and final buy-off. - Review documents for accuracy and completeness. - Generate discrepancy reports for identified flaws, internal defects and incorrect work. Candidate must be willing to...

Standard Job Description You will be the Mechanical/Electrical Controls Mechanic. From ultra-precision machining and additive manufacturing to the development and production of complex optical components and sophisticated electronic systems, Lockheed Martin Missiles and Fire Control (MFC) utilizes the latest capabilities in manufacturing to produce some of the world's most advanced weapon and sensor technology. What You Will Be Doing As the CNC Maintenance Mechanic, your responsibilities will include but are not limited to: • Analyzing, troubleshooting and repairing a variety of CNC and multi-purpose mechanical and/or electromechanical control systems for industrial and precision equipment. • Testing and analyzing malfunctions, modifies, repairs, adjusts and maintains mechanical portions of automatic control instruments and related recording devices used in the operation of industrial manufacturing equipment. • Operating machine through necessary cycles to check...

Description SAIC is looking for an experienced, energetic, and motivated Field Service Technician to join our Land Border Integration team in the Tucson area. As a Field Service Technician working for SAIC you will have a fast moving, challenging, and highly rewarding position keeping the infrastructure running that helps Customs and Border Protection keep our borders safe. Travel Requirements: Travel to US Customs Ports of Entry and Border Patrol locations in the Tucson region. Daily area of coverage could include sites up to 150 miles from home base. Mileage will be reimbursed at the prevailing government rate. Reliable transportation with insurance. Substantial toolkit to support installation and maintenance activities will be provided. Responsibilities: Perform routine maintenance and inspections at Ports of Entry on deployed equipment, including but not limited to License Plate Reader (LPR) equipment, RFID, network/power, signage, and communication...

Description: You will be the Mechanical and Tool Inspector for the Missiles and Fire Control team. Our team is responsible for producing some of the world's most advanced weapon and sensor technology through ultra-precision machining, additive manufacturing, and the development of complex optical components and sophisticated electronic systems. What You Will Be Doing As the Mechanical and Tool Inspector, you will be responsible for performing in-process / courtesy / quality witness / final inspections on machined parts, electro-mechanical, mechanical, composite, integrated systems and various coatings including chemical conversion coating, military grade primer / paint, powder coat and anodize. Your responsibilities will include: Performing in-process / courtesy / quality witness / final inspections on machined parts, electro-mechanical, mechanical, composite, integrated systems and various coatings. Inspecting mechanical assemblies utilizing Coordinate...

Description: You will be the CNC Maintenance Mechanic for the Controls Team. Our team is responsible for ultra‑precision machining, additive manufacturing, and the development of complex optical and electronic systems for Lockheed Martin Missiles and Fire Control. What You Will Be Doing As the CNC Maintenance Mechanic you will be responsible for maintaining and repairing CNC and electromechanical control systems that keep our advanced manufacturing equipment running. Your responsibilities will include, but are not limited to: Analyzing, troubleshooting, and repairing CNC and multi‑purpose electromechanical control systems. Testing, adjusting, and maintaining mechanical portions of automatic control instruments. Operating machines through required cycles to verify mechanical and electronic specifications. Performing incidental welding in conjunction with normal maintenance activities. Setting up precision test tools and conducting detailed...

Description: You will be the In-Process Build Inspector for the Lockheed Martin Missiles and Fire Control (MFC) team. Our team is responsible for ensuring the quality and functionality of electrical, electronic, and mechanical systems, among others, to meet company and customer requirements. What You Will Be Doing As the In-Process Build Inspector you will be responsible for conducting in‑process inspections that verify assemblies meet engineering specifications and performance standards. Your responsibilities will include, but are not limited to: Perform detailed inspections of electrical, electronic, and mechanical components during build. Compare work against drawings, specifications, and test data. Document findings and generate non‑conformance reports. Collaborate with engineers and production staff to resolve quality issues. Support continuous‑improvement initiatives to enhance product reliability. Why Join Us The ideal candidate...

Description: You will be a Semiconductor Equipment Maintenance Technician for our team in Goleta, CA. Our team is responsible for maintaining and repairing semiconductor equipment to ensure optimal performance and efficiency. What You Will Be Doing As a Semiconductor Equipment Maintenance Technician, you will be responsible for: • Responding to emergency service calls as required • Instructing customer operating technicians on system operation and maintenance • Remaining current on equipment/tools through appropriate training, manuals, factory periodicals, and other relevant materials • Responsible for the upkeep, maintenance, and security of company property including vehicles, tools, etc. • Managing facility and equipment work orders in the ticketing system • Network/team player with team and vendors promoting healthy work relationships Shift: Typical hours for this swing shift are 12pm to 10:30pm (Wednesday-Saturday), with initial training period performed during...