11 mechanical design engineer jobs found in Fort Worth, TX

Description: You will be the Air Vehicle Health Management / IVHM Systems Engineer - Level 2 for the Vehicle Systems Directorate, working on the Diagnostics, Prognostics, and Health Management (DPHM) Team. What You Will Be Doing As the Air Vehicle Health Management / IVHM Systems Engineer - Level 2, you will be working on an Agile scrum team to design and maintain diagnostic and prognostics capabilities for air vehicle systems and sub-systems. Your primary responsibility will be to develop, analyze, and mature the DPHM capability by understanding system engineering, model-based systems engineering, aircraft systems/subsystems and design, testability analysis, built-in-test (BIT) analysis, and failure mode effects and criticality analysis (FMECA). ”Your responsibilities will include: Developing, analyzing, and maturing the DPHM capability to detect and isolate root cause failures within an air vehicle and drive maintainer corrective actions for troubleshooting and...

Description: You will be the Air Vehicle Health Management / IVHM Systems Engineer - Level 2 for the Diagnostics, Prognostics, and Health Management (DPHM) Team which is responsible for delivering cutting‑edge health‑management capabilities to modern military aircraft. What You Will Be Doing As the Air Vehicle Health Management / IVHM Systems Engineer - Level 2 you will be responsible for shaping diagnostic and prognostic solutions that detect, isolate, and drive corrective actions for aircraft system failures. Your responsibilities will include: Develop, analyze, and mature DPHM capabilities using model‑based systems engineering and testability analysis. Define diagnostic requirements, conduct FMECA, and design built‑in‑test (BIT) solutions. Coordinate schedules, plans, and integration activities with technical leads and stakeholders. Brief project status to engineering leadership and ensure alignment with program objectives. Collaborate...

Description: We are Lockheed Martin You will be a Data Analyst (Systems Engineer) for the ISE (Integrated System Evaluation) team. Our team is part of the Systems Engineering organization. What You Will Be Doing: As a Data Analyst, you will serve as a domain analyst in one of the domains listed below. As a key member of our team, you will leverage your knowledge and experience in one of the following domain disciplines: Weapons, Fusion/Sensors, or CNI/Datalinks to drive technical excellence in analysis and evaluation. In this dynamic and fast-paced role, you will provide lab and flight test analysis, evaluation, and development of analytics, working closely with cross-functional teams to deliver complex solutions. Key Responsibilities: • Serve as a domain analyst for the Analytics and Analysis (A&A) team within ISE, providing data driven performance assessments in one of the listed domain disciplines (Weapons, Radar, Electronic Warfare, Electro Optical,...

Description: At Lockheed Martin Aeronautics, we're taking innovation to the next level. From designing the most advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities for a technical career been so limitless. This position is for a Level 2 Air Vehicle (AV) / Integrated Vehicle Health Management (IVHM) Systems Engineer. Candidate will be working on an Agile scrum team to design and maintain diagnostic and prognostics capabilities for air vehicle systems and sub-systems capable of detecting and isolating root cause failures within an air vehicle and driving maintainer corrective actions for troubleshooting and resolution. • Primary role is a Systems Engineer within the Vehicle Systems Directorate on the Diagnostics, Prognostics, and Health Management (DPHM) Team. • As a Systems Engineer your primary responsibility is to develop, analyze and mature the DPHM capability by understanding the...

Description: You will be the Software Safety Engineer Stf for the Fighter System Safety Team which is responsible for performing analyses for hazard identification, evaluation, and control using quantitative and qualitative analysis techniques typically used in the design of aircraft weapon systems and sustainment activities. What You Will Be Doing As the Software Safety Engineer Stf you will be responsible for performing analyses for hazard identification, evaluation, control, and coordination in support of software safety activities for internal and external stakeholders of fighter aircraft platforms. Your responsibilities will include: Develop and assist in preparing software aspects of the hazard analysis, including development of software safety requirements. Review and analyze software to ensure appropriate Integrated Product Team (IPT) process definition meets the required safety level. Assess individual IPT compliance and collect evidence for...

Description: We are Lockheed Martin You will be the Verification and Validation Systems Engineer for the Enterprise Verification and Validation team. Our team executes verification planning, modeling and execution in support of development contracts. What You Will Be Doing: As the Verification and Validation Systems Engineer, your responsibilities will include: • Defining system level requirements, analyzing, decomposing and allocating system requirements to all areas of the Air System, including Mission Systems, Vehicle Systems, Mission Planning, Weapons, ALIS, Training, and Support Equipment. • Defining system level verification activities through the development of verification requirements and pass criteria to ensure the Air System requirements are being verified through the assessment of program analysis, test and demonstration activities across all areas of the Air System. **Must be a US Citizen. This position is located at a facility that requires special access.**...

Description: We are Lockheed Martin You will be the Verification and Validation Systems Engineer Sr. Staff for the Enterprise Verification and Validation team. Our team executes verification planning, modeling and execution in support of development contracts. What You Will Be Doing: As the Verification and Validation Systems Engineer, your responsibilities will include: • Leading the weapons domain as a senior technical engineer for the Verification team making sure all weapons scope/products are technically adequate. • Support MBSE process evolution with a focus on weapons scope in support of the F35 program. • Defining system level requirements, analyzing, decomposing and allocating system requirements to all areas of the Air System, including Mission Systems, Vehicle Systems, Mission Planning, Weapons, ALIS, Training, and Support Equipment. • Defining system level verification activities through the development of verification requirements and pass criteria to ensure the...

Description: We are Lockheed Martin Job Description : You will be the Verification and Validation Systems Engineer for the Enterprise Verification and Validation team. Our team executes verification planning, modeling and execution in support of development contracts. What You Will Be Doing: As the Verification and Validation Systems Engineer, your responsibilities will include: • Defining system level requirements, analyzing, decomposing and allocating system requirements to all areas of the Air System, including Mission Systems, Vehicle Systems, Mission Planning, Weapons, ALIS, Training, and Support Equipment. • Defining system level verification activities through the development of verification requirements and pass criteria to ensure the Air System requirements are being verified through the assessment of program analysis, test and demonstration activities across all areas of the Air System. **Must be a US Citizen. This position is located at a facility that requires...

Description: You will be the F-35 Systems Engineer (Software) - Level 2 for the Fluid and Mechanical Systems Team which is responsible for advancing the F‑35 program’s hydraulic, landing‑gear, and fuel software capabilities. What You Will Be Doing As the F‑35 Systems Engineer (Software) - Level 2 you will be responsible for delivering high‑impact software updates, creating analytical tools, and ensuring the aircraft’s critical subsystems operate flawlessly. Your work will directly influence mission readiness and safety. Your responsibilities will include: Designing and implementing system‑level logic changes to aircraft software applications. Developing and maintaining MATLAB code for efficient database queries and analysis. Providing software‑logic support for aircraft troubleshooting and root‑cause corrective action investigations. Coordinating fuel‑software updates with suppliers and ensuring timely deployment. What’s In It For You We are committed...

Description: We are Lockheed Martin Lockheed Martin Aeronautics Company's F-35 program seeks an experienced and motivated Full Stack Software Engineer to join the Signature Integration Team for Supportable Low Observables (SLO). This role focuses on developing sophisticated software analysis tools using modern web development technologies. The successful candidate will be part of the F-35 SLO division building and maintaining advanced sustainment software tools. They will implement responsive, data-driven user interfaces and robust backend services while ensuring seamless integration between components. The position involves containerized deployment in cloud-native environments, maintaining high code quality through comprehensive testing and automated pipelines. The role requires working both independently and collaboratively in cross-functional teams, with an ability to take full ownership of features and deliver high-quality solutions from concept to production. The ideal...

Description: You will be the Systems Engineer Sr for the Simulation and System Laboratories (SSL) F-35 RL Design, Integration, Verification & Validation Team, which is responsible for performing technical execution of requirements and design development, and integration and test. What You Will Be Doing As the Systems Engineer Sr, you will be responsible for employing Model-Based Systems Engineering (MBSE) techniques to model Reprogramming Laboratory (RL) system functionality, behavior and requirements allocation. Your responsibilities will include: Performing technical execution of requirements and design development using MBSE techniques. Modeling RL system functionality and requirements allocation using tools such as Cameo. Verifying, testing, integrating, and sustaining delivered RL baselines for the SSL F-35 RL Design, Integration, Verification & Validation Team. Applying system requirements developments, systems engineering "V" process...