51 manufacturing engineering jobs found in Fort Worth

Description: What You Will Be Doing • The F-35 International Manufacturing Engineer will be an expatriate assignment in Cameri, Italy, specifically providing technical assistance to Leonardo F-35 Wing production. • Align and integrate best practices between Lockheed Martin Ft. Worth and Italy to ensure efficiency and mitigate risk within the Co-Production value stream and assist as needed with integration between F-35 build sites. • The ideal candidate will have F-35 Manufacturing Engineering or Specialist experience and be expected to manage multiple projects simultaneously and will have demonstrated expertise in managing complex cross-functional improvement projects from requirement identification through implementation and sustainment • Perform floor support to solve immediate production constraints. • Develop corrective actions and lead projects to improve the production system, reducing Scrap Rework and Repair (SRR) cost and hours per unit (HPU) • Perform manufacturing...

Description: The F-35 is designed with the entire battlespace in mind, bringing new flexibility and capability to the United States and its allies. Reliance on any single capability — electronic attack, stealth, etc. — is not sufficient for success and survivability in the future. Missions traditionally performed by specialized aircraft — air-to-air combat, air-to, ground strikes, electronic attack, intelligence, surveillance and reconnaissance — can now be executed by a squadron of F-35s. F35 Aircraft Mate/ Forward Fuselage Manufacturing Engineering Sr will directly support primarily the production team. THIS IS A 3RD SHIFT POSITION. What You Will Be Doing Selected Candidate will be required to: • Perform floor support to solve immediate production constraints. • Develop corrective actions to improve the production system, reducing Scrap Rework and Repair (SRR) cost and hours per unit (HPU). • Update the manufacturing plan • Perform manufacturing evaluations of engineering...

Description: The F-35 is designed with the entire battlespace in mind, bringing new flexibility and capability to the United States and its allies. Reliance on any single capability — electronic attack, stealth, etc. — is not sufficient for success and survivability in the future. Missions traditionally performed by specialized aircraft — air-to-air combat, air-to, ground strikes, electronic attack, intelligence, surveillance and reconnaissance — can now be executed by a squadron of F-35s. F35 Aircraft Mate/ Forward Fuselage Manufacturing Engineering Stf will directly support primarily the production team. What You Will Be Doing Selected Candidate will be required to: • Perform floor support to solve immediate production constraints. • Develop corrective actions to improve the production system, reducing Scrap Rework and Repair (SRR) cost and hours per unit (HPU). • Update the manufacturing plan • Perform manufacturing evaluations of engineering changes • Perform QAR...

Description: Lockheed Martin’s legacy of aviation excellence is built on perseverance, innovation, and a relentless drive to deliver mission‑critical results. As a Level 2 F-35 Wing Systems Manufacturing Engineer, you will work with senior engineers and cross‑functional teams, gaining exposure to the fundamentals of aircraft structural/systems manufacturing while contributing to continuous improvement initiatives, SRR reduction initiatives, tooling improvements, and engineering change management. What You Will Be Doing • Project Support – Assist senior engineers on production‑support initiatives such as SRR reduction, HPU reduction, and tooling refinements. • Documentation – Contribute to updates of Standard Operating Procedures (SOPs) and Manufacturing Plans under guidance. • Corrective Action Participation – Join corrective action reviews, execute assigned Corrective Action Plan (CAP) tasks, and track issue resolution. • CAD Assistance – Provide basic CAD support (CATIA...

Description: What You Will Be Doing Supports production, business, and other processes in a team-based manufacturing environment. Performs activities in a variety of cross-functional areas including production planning and control, total quality management, systems, manufacturing, equipment and facilities engineering, material management, and process reengineering. The incumbent may facilitate self-directed work teams, provide training in core skill areas to teams and peers, and interact with internal and external customers with respect to product planning, problem resolution, and process improvement. Incumbents are generally experienced in one or more areas of manufacturing operations. Second Shift What’s In It For You! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers...

Description: What You Will Be Doing Supports production, business, and other processes in a team-based manufacturing environment. Performs activities in a variety of cross-functional areas including production planning and control, total quality management, systems, manufacturing, equipment and facilities engineering, material management, and process reengineering. The incumbent may facilitate self-directed work teams, provide training in core skill areas to teams and peers, and interact with internal and external customers with respect to product planning, problem resolution, and process improvement. Incumbents are generally experienced in one or more areas of manufacturing operations. Second Shift What’s In It For You! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers...

Description: We are seeking a Level 3 Specialist to support production in the J850 F‑35 final‑assembly line. What You Will Be Doing The role interfaces with numerous cross‑functional groups—including production planning & control, quality, systems and manufacturing engineering, equipment & facilities engineering, material management, and process‑reengineering teams. Second Shift Key responsibilities include: Leading work‑team initiatives and delivering core‑skill training to peers and crew members. Engaging with internal and external customers to support product planning, resolve technical issues, drive process improvements, and close DCMA actions. Applying aerospace manufacturing expertise to ensure safe, efficient, and on‑schedule assembly of the aircraft. The ideal candidate has extensive experience in aerospace manufacturing environments and a proven ability to collaborate across disciplines to achieve production goals. What’s In It For You! From onsite...

Description: The Manufacturing Engineering Senior Manager leads the Post Delivery Modification (PDM) team, Manufacturing Test Engineering (MTE) Projects team, and the Enterprise Drilling Technology and Integration (EDTI) team. This role provides technical direction and business leadership for a high performing group of Manufacturing Engineers, Manufacturing Test Engineers, and Tooling Engineers who support all Aeronautics programs. The leader drives cost effective, schedule driven solutions while ensuring compliance with Earned Value Management System (EVMS) requirements at the OBS level. Specific responsibilities include: - Develop manufacturing plans and tooling solutions to support and lead complex modifications and repair efforts at customer sites - Gather and translate test equipment requirements into robust, integrated test solutions for a complex production environment - Define hole preparation requirements, development of complex designs, delivery of capabilities, and...

Description: The F-35 is designed with the entire battlespace in mind, bringing new flexibility and capability to the United States and its allies. Reliance on any single capability — electronic attack, stealth, etc. — is not sufficient for success and survivability in the future. Missions traditionally performed by specialized aircraft — air-to-air combat, air-to, ground strikes, electronic attack, intelligence, surveillance and reconnaissance — can now be executed by a squadron of F-35s. F35 Aircraft Mate/ Forward Fuselage Manufacturing Engineering Sr will directly support primarily the production team. THIS IS A 2ND SHIFT POSITION. What You Will Be Doing Selected Candidate will be required to: • Perform floor support to solve immediate production constraints. • Develop corrective actions to improve the production system, reducing Scrap Rework and Repair (SRR) cost and hours per unit (HPU). • Update the manufacturing plan • Perform manufacturing evaluations of...

Description: The F-35 is designed with the entire battlespace in mind, bringing new flexibility and capability to the United States and its allies. Reliance on any single capability - electronic attack, stealth, etc. — is not sufficient for success and survivability in the future. Missions traditionally performed by specialized aircraft — air-to-air combat, air-to, ground strikes, electronic attack, intelligence, surveillance and reconnaissance — can now be executed by a squadron of F-35s. F35 Aircraft Mate/ Forward Fuselage Manufacturing Engineer will directly support primarily the Mate production team. What You Will Be Doing Selected Candidate will be required to: • Perform floor support to solve immediate production constraints. • Develop corrective actions to improve the production system, reducing Scrap Rework and Repair (SRR) cost and hours per unit (HPU). • Update the manufacturing plan. • Perform manufacturing evaluations of engineering changes. • Perform QAR...

Description: What You Will Be Doing This position will be the Structures Lead for the F35 Wing Systems Manufacturing Engineering Team. This manufacturing engineering lead position will directly support the Wing System production build teams and will require direct coordination with Production, Engineering, Quality, IE, OE and Planning. The candidate should be a subject matter expert in manufacturing engineering and will be responsible for projects for production support, SRR reduction, HPU reduction initiatives, tooling improvements, engineering change management, and mentoring early career team members. Candidate must be able to manage complex technical issues and drive to resolution. All Wing manufacturing engineers are responsible for: • Maintaining/ improving our Standard Operating Procedures and Manufacturing Plans. • Driving our corrective action business rhythms. • Coordinating with other support teams for improvements and affordability initiatives. • Collaboration with...

Description: What You Will Be Doing This role will serve as a Project Integrator for F35 Production Engineering. As a Project Integrator you will be facilitating business case creation for various HPU and SRR reduction initiatives to support F-35 Production Operations. Responsible for overseeing and managing the operational aspects of ongoing projects and serves as liaison between project management and planning, project team, and Production Leadership. Reviews status of projects and budgets. Manages schedules and prepares status reports. Assesses project issues and develops resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Develops mechanisms for monitoring project progress and for intervention and problem solving with project managers, ME leadership, and other stakeholders. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future...

Description: What You Will Be Doing Position will be at the technical forefront of all F35 Engineering Change Requests (CRs) that impact Production operations across all Domestic Sites. As a Manufacturing Engineer Stf supporting the F-35 Domestic Change Integration Manufacturing Engineering (ME) team, you will be responsible for all CRs processed through the CR lifecycle, serving as one of the primary contacts within Production Engineering providing coordination between various functions to ensure engineering changes can be broken in effectively while remaining within cost and schedule constraints. • Provide technical solutions for a wide range of difficult problems using solutions that are imaginative, thorough, practical and consistent with organization objectives. • Provide technical integration and communicate solutions to support build, training, test and troubleshooting for all manufacturing processes and system check out procedures. • Review and aid the co-producer...

Description: What You Will Be Doing Position will be at the technical forefront of all F35 Engineering Change Requests (CRs) that impact Production operations across all Domestic Sites. As a Manufacturing Engineer Sr supporting the F-35 Domestic Change Integration Manufacturing Engineering (ME) team, you will be responsible for all CRs processed through the CR lifecycle, serving as one of the primary contacts within Production Engineering providing coordination between various functions to ensure engineering changes can be broken in effectively while remaining within cost and schedule constraints. • Provide technical solutions for a wide range of difficult problems using solutions that are imaginative, thorough, practical, and consistent with organization objectives. • Provide technical integration and communicate solutions to support build, training, test, and troubleshooting for all manufacturing processes and system check out procedures. • Review and aid the production...

Description: What You Will Be Doing This is a Manufacturing Engineer Sr Staff position on the Production Engineering (PE) F‑35 Strategic Corrective Action (SCA) team in Fort Worth, Texas. In this role dynamic role you will serve in a Technical Lead capacity, primarily supporting the Rework and Repair (R&R) Council, as well as other potential special assignments and Technical Lead duties as required. This high visibility role will allow you to work cross-functionally to develop and execute on the strategy to support the R&R reduction efforts across F-35 Production Operations. This role is essential to shaping the future of F-35 R&R strategy and must be comfortable periodically reporting to Senior Leadership including Director and VP level leaders. You will lead various project charters and support the cross functional teams as needed in their efforts to reduce R&R across the program. This will include investigations of manufacturing processes across multiple...

Description: What You Will Be Doing You will be the Data Scientist Analyst Stf (Level 4) for the F35 Production Engineering Team. Our team is responsible for transforming refined data into actionable insights that drive Manufacturing Engineering, Manufacturing Planning and Production Operations decisions and delivering business‑ready data products. In this highly visible role you will report directly to the F35 Production Engineering Strategic Operations Sr Manager and have periodic reporting to the Production Engineering Director. This new role will help shape the future of Data Analytics within the PE organization. This role will lead the transition from current Data Analytics products such as Tableau Dashboards into AI adoption. This role will serve as the primary for development and integration of AI products into the organization as well as working with the leadership to develop a pathway to larger scale AI adoption. What’s In It For You: 3 day weekends every weekend!...

Description: What You Will Be Doing This is a Manufacturing Engineer Staff position on the Production Engineering (PE) F‑35 Strategic Corrective Action (SCA) team in Fort Worth, Texas. In this role you will lead investigations of manufacturing discrepancies across multiple build sections, applying Lean Six Sigma tools to uncover root causes, close process gaps, and develop corrective action plans. You will work closely with Quality Engineering and Production Operations, coordinate cross functional teams, promote creative problem solving, and drive product improvement initiatives. Throughout each corrective action effort you will project manage the work from initiation through verification and closure, while tracking key metrics to reduce variation and elevate overall product quality. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about...

Description: What You Will Be Doing Aeronautics’ Production Engineering Central Services (PECS) organization is seeking a motivated Manufacturing Engineer (ME) to join the Planning Central Services team as a Planning Capability Development ME. In this role, you will serve as an ME Planning representative on our Capability Development Teams. You will help shape the next generation Product Lifecycle Management (PLM) application and Manufacturing Execution Systems (MES) for our current programs: F35, F16 and C130. Your work will directly support Lockheed Martin’s Digital Transformation initiative by helping to modernize the manufacturing process planning and manufacturing execution processes and system capabilities. The team will be tasked with moving these programs out of our legacy systems (SAP CAMS) and into Siemens Teamcenter and Dassault Systèmes Apriso. This is your opportunity to contribute to a digital transformation project that will shape the future of Lockheed...

Description: What You Will Be Doing Aeronautics’ Production Engineering Central Services (PECS) organization is seeking a motivated Manufacturing Engineer (ME) to join the Planning Central Services team as a Planning Capability Development ME. In this role, you will serve as an ME Planning representative on our Capability Development Teams. You will help shape the next generation Product Lifecycle Management (PLM) application and Manufacturing Execution Systems (MES) for our current programs: F35, F16 and C130. Your work will directly support Lockheed Martin’s Digital Transformation initiative by helping to modernize the manufacturing process planning and manufacturing execution processes and system capabilities. The team will be tasked with moving these programs out of our legacy systems (SAP CAMS) and into Siemens Teamcenter and Dassault Systèmes Apriso. This is your opportunity to contribute to a digital transformation project that will shape the future of Lockheed...

Description: We are Lockheed Martin Lockheed Martin Aeronautics is seeking a Manufacturing Support Team Member Senior (Level 3) to join our team supporting Final Assembly Systems Checkout in Fort Worth, TX. In this role, you’ll help drive performance and process improvements across a variety of critical manufacturing and production operations in support of the F-35 program. What You Will Be Doing Support Final Assembly Systems Checkout (FASC) and other core manufacturing processes in a dynamic, team-based production environment. Collaborate across multiple functional disciplines including production planning and control, total quality management, material management, and systems/process engineering. Facilitate and support self-directed work teams to ensure goals are met and continuous improvement is sustained. Provide core skills training and mentorship to peers and team members. Engage internal and external customers to resolve product planning issues,...