44 jobs found in Marietta

Description: You will be the Production Assembler - F35 for the team which is responsible for assembling and installing various components of the F35 aircraft. What You Will Be Doing As the Production Assembler - F35, you will be responsible for using jigs and fixtures, rivet upsetting and bench assembly equipment, and hand tools to assemble and install components. Your responsibilities will include: Using rules, squares, protractors, and dividers to ensure accurate assembly and installation Reading and interpreting detail, assembly, and installation blueprints or other authorized documents to obtain assembly and installation information and material callouts Using arithmetic, including decimals and fractions, to perform calculations and measurements Working to tolerances as required for the type of work described herein Assembling and installing components using jigs and fixtures, rivet upsetting and bench assembly equipment, and hand tools...

Description: You will be the Aircraft Electrical & Electronics Mechanic - Fabrication for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - Fabrication, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and...

Description: What You Will Be Doing This role will be responsible for the integration of functional Industrial Engineering solutions for C-130 Assembly by creating, analyzing, and monitoring health metrics, producing production plans and supporting continuous improvement activities. Individual will support Production through engagement and consultation with the team. Must engage daily Manufacturing Engineering, Production Management, and a variety of Production support functions. The successful candidate will have experience and/or knowledge of developing production/process plans, using statistical analysis, and gathering/analyzing data for presentations to leadership. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers...

Description: What You Will Be Doing This role will be responsible for the integration of functional Industrial Engineering solutions for C-130 Flight Line operations by analyzing and developing production plans, creating and monitoring Flight Line health metrics and continuous improvement activities. Individual will strive to enhance all Flight Line related activities through engagement and consultation with the team. Must engage daily Manufacturing Engineering, Production Management, and a variety of Production support functions. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to...

Description: What You Will Be Doing As the Helix AI/ML Developer (Level 2) your responsibilities will include but are not limited to: • Responsible for developing, integrating, and deploying autonomy and artificial intelligence algorithms for mission systems, supporting the technology development life cycle from requirements generation through development, integration, and testing, as well as research in some organizations. • Develops, integrates, and implements algorithms to enable perception, motion/mission planning, controls, etc. functionality in LM products and platforms. • Translates requirements and applies requirements to development code, integrating autonomy, AI or machine learning algorithms to LM products and platforms; Determines software methods to best acquire and execute knowledge. • Implements algorithms into software to train systems to recognize patterns and perform specific functions. • Responsible for various phases of developing and maintaining autonomy...

Description: This manufacturing planner position is within the RCO supporting AMMM, F-22, F-35, F-16, ADP and sustainment programs with the following responsibilities: What You Will Be Doing -Supports all Kanban activity and maintenance -Supports Wire replenishment activity and maintenance -Supports RCO Project planning and execution -Supports inventory management, control and compliance -Supports warehouse quality control and compliance - Supports material requirements for Production SWBS'S to ensure a controlled flow of approved materials timed to meet production requirements - Monitors key performance indicators related to RCO warehouse activities, parts movement and requirement planning - Ensures material requirements are satisfied to mitigate parts constraints and other negative impacts to production - Utilizes Shop Floor Control and MRP working knowledge to support requirements planning and execution for the Component Build areas. -Monitors the flow of materials...

Description: You will be the Machinist General/ Set-up for the team which is responsible for planning, laying out work for setting up, and operating various types of power feed milling machines and automatic electrically or hydraulically controlled duplicating and profiling machine tools. What You Will Be Doing As the Machinist General/ Set-up, you will be responsible for setting up power machine tools and operating machines for trial runs and to make short runs on complex parts. Your responsibilities will include: Setting up and operating computer numerically controlled (CNC) milling machines fully utilizing preprogrammed operations and subroutines Recording data and commands for subsequent use by assigned machine operators or machinists Setting up and operating standard power machine tools such as broaching machines, semi-automatic boring machine, single and multiple spindle drill press, radial drill press, shaper, planer, boring mill, milling machine,...

Description: You will be the Machinist General/ Set-up for the team which is responsible for planning, laying out work for setting up, and operating various types of power feed milling machines and automatic electrically or hydraulically controlled duplicating and profiling machine tools. What You Will Be Doing As the Machinist General/ Set-up, you will be responsible for setting up power machine tools and operating machines for trial runs and to make short runs on complex parts. Your responsibilities will include: Setting up and operating computer numerically controlled (CNC) milling machines fully utilizing preprogrammed operations and subroutines Recording data and commands for subsequent use by assigned machine operators or machinists Setting up and operating standard power machine tools such as broaching machines, semi-automatic boring machine, single and multiple spindle drill press, radial drill press, shaper, planer, boring mill, milling machine,...

Description: You will be the Trainer Structural Maintenance - Level 4 for the C‑130 Production Line Training team which is responsible for developing the next generation of mechanics and on‑the‑job trainers. What You Will Be Doing As the Trainer Structural Maintenance - Level 4 you will be responsible for delivering hands‑on guidance, mentorship, and skill development to mechanics and junior trainers on the C‑130 production line. Your responsibilities will include: Provide direct on‑the‑job training to mechanics, ensuring quality workmanship and adherence to structural maintenance standards. Mentor and coach less‑experienced trainers, building their ability to teach and improve floor‑level proficiency. Develop and update training materials, work instructions, and standard operating procedures. Assess trainee performance, give constructive feedback, and track skill progression. Collaborate with production leads to align training activities with...

Description: This occupation requires the complete layout, cutting, fabricating, assembling and installing aircraft trim parts, vehicle seat covers, chair pads, aircraft and plant equipment coverings, curtains, tire, propeller and engine covers, boots, etc. Plans and makes the original layouts (pattern development) and develops information for changes in Engineering sketches and drawings resulting from trim operations. Works from incomplete engineering information. Fabricates and assembles samples, basis and exterior trim thereof for those complex trim items, such as seats, chairs, divans, davenports and drapes, etc., that demand the full exercise of the varied skills of the upholstering craft. Works with engineering to effect trim design and changes, and metal and wood basic structure to be altered or designed as a result of operations performed during the original fitting of the trim to the underlying structures. Develops curtains to specific areas for various purposes and...

Description: What You Will Be Doing • Production Floor Support: Provide real-time floor support to quickly resolve production constraints and ensure continuous product flow. • Corrective Action Development: Conduct root cause analysis and develop / implement actions aimed at improving the production system, focusing on reducing Scrap, Rework, and Repair (SRR) rates, as well as Hours Per Unit (HPU). • Manufacturing Plan Updates: Revise and enhance the Manufacturing Plan to incorporate new technologies and prevent defects. • Engineering Change Evaluations: Conduct manufacturing evaluations of engineering changes, ensuring that modifications align with production capabilities. • Technical Production Support: Offer technical support to Production Operations, including mechanics and other key personnel, to maintain smooth product flow and operations. • Cost Reduction Initiatives: Lead efforts to create product span and cost-reduction initiatives to streamline production and increase...

Description: This occupation requires the regular or periodic performance of work described in all of the following job descriptions: · Industrial Radiographer · Inspector - Magnetic and Fluorescent Penetrant · Inspector - Ultrasonic The following is subjugated to and controlled by the job description, and may be altered within the limits contemplated by the job description and as dictated by the Company requirements and the qualifications of available candidates. A Candidate is required to have the following levels of experience and/or training: 1. Any four of the following Level 2 experience: a. Documented experience performing magnetic particle inspections for six months. b. Documented experience performing fluorescent penetrant inspections for six months. c. Documented experience performing eddy current inspections for six months. d. Documented experience performing ultrasonic inspections for twelve months. e. Documented experience performing X-ray...

Description: You will be the Fabrication-Heat Treat Mechanic for the team which is responsible for heat treating and age hardening and testing of steel, and aluminum production parts and their alloys, rivets, steel tooling parts and stock. What You Will Be Doing As the Fabrication-Heat Treat Mechanic, you will be responsible for determining the heat treat process and quenching required to obtain results, and determining proper timing and temperature of ovens, salt baths according to material composition, shape, size and thickness. Your responsibilities will include: Heat treating production steel and aluminum parts, tooling parts, dies and stock made from steel or steel alloys Operating hand or power equipment to change furnace or bath and quenching, and checking and maintaining heat treat solutions Operating age hardening ovens by checking orders for correct material and preceding heat treat, and setting controls for proper heat and time according to...

Description: What You Will Be Doing This position is for an Industrial Engineer Sr supporting new programs in Marietta, GA. This role will be responsible for the integration of functional Industrial Engineering solutions in ADP by analyzing and developing production plans and schedules, creating and monitoring production health metrics, and continuous improvement activities. Individual will strive to enhance all production related startup activities through the use of a variety of industrial engineering approaches. Individual may have opportunities to perform as project manager. Will work closely with Industrial Engineering, Production Management, and a variety of Production support functions. This position is in Marietta, GA Basic Qualifications: - Industrial Engineering experience in heavy industry - Project management experience - Production scheduling experience - Capacity/Resource planning experience Desired Skills: - Bachelor of Science degree in Industrial...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: You will be the Material Handler/Warehouse/Inventory Management for the team which is responsible for segregating, routing, and controlling the flow of new, used, damaged, or surplus project or standard tools. What You Will Be Doing As the Material Handler/Warehouse/Inventory Management, you will be responsible for tracking tools through the rework/repair cycle and ultimate assignment of stocking and maintaining accountability of various standard tools and equipment within a shop floor environment. Your responsibilities will include: Receiving, warehousing, and shipping materials, parts, and tools within an industrial environment Performing production control tasks and activities in support of a fabrication and/or assembly environment Lifting and moving raw materials, parts, tools, equipment, and associated materials in a warehouse environment Operating mechanical/motor driven equipment such as hoist, towing equipment, cranes, tugs,...

Description: You will be the Assembly Worker Structures Sr - F22 for the team which is responsible for laying out and locating structural components or assemblies in making production assemblies as specified by design changes. What You Will Be Doing As the Assembly Worker Structures Sr - F22, you will be responsible for performing difficult structural pick-up and/or rework such as removing, replacing, or realigning ribs, bulkheads, stringers, or fittings in completed skinned assemblies. Your responsibilities will include: Working structural changes which materially alter previous assembly references and practice Performing trimming, reforming, and altering parts and structures as required Fabricating detail parts such as shims, splices, gussets, angles, brackets, doublers, stiffeners, and patches Performing portable milling operations on wing and center section attaching joints Improvising shop aids to facilitate assembly and installation as...

Description: This role will be responsible for the integration of Industrial Engineering solutions in Fabrication by working with the production team to meet production plans and schedules, creating and monitoring production health metrics, maintaining work standards and systems. Individual will help the Production Operations team manage production activities through the use of a variety of industrial engineering and EVMS approaches. Will work closely with Industrial Engineering, Production Management, and a variety of Production support functions. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable...

Description: What You Will Be Doing Leadership and Management: • Lead and oversee Supervisors, Technical Leads, and manufacturing activities, including facilities and capital planning, tool utilization, manufacturing plans, workflows, and crew loading. • Assign work priorities to manufacturing planning, manufacturing engineers, industrial engineers, quality engineers, production control, and inspection teams. • Manage direct, indirect, and allocated Business Unit Budgets. Production and Performance Management: • Utilize earned value management tools to manage and track production task execution. • Ensure timeliness and accuracy of aircraft records. • Drive the overall strategy and execution of manufacturing processes, ensuring alignment with budget and schedule targets. • Coordinate with manufacturing engineering to provide technical guidance to employees and optimize staffing, line analysis, and planning. Quality and Compliance: • Verify that products meet all quality and...

Description: Manage team of Industrial Engineers supporting new programs in Marietta, GA . The candidate will provide estimates of labor, production schedules, capacity and resource loading, and performance measurement for production operations. This position is in Marietta, GA à Discover Marietta. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. Who You Are You are a multi-faceted teammate able to communicate and function effectively on...