68 data engineer jobs found

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Standard Job Description The mission matters. So do the people behind it. With advancing defense technology at our core, what sets us apart is a culture of collaboration, purpose, and impact. What is the mission? Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more— we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision.    What does this role look like? ➥ We are the voice steering today’s design decisions to drive tomorrow’s production success. ➥ This Manufacturing Engineering position will support Space Vehicle design...

Long Description You will be the Program Manufacturing Engineer supporting Affortability/IRAD and MAC efforts as part of Air Dominance Operations team. Our team is responsible for creating and improving manufacturing strategies for complex missile assemblies, and we play a crucial role in developing and implementing solutions for technical and organizational challenges. What You Will Be Doing As the Manufacturing Engineer you will be responsible for driving improvement initiatives that support Air Dominance Production Operations. You will be tasked with improving the overall process of the build using complex, cutting edge technologies and automation. Supporting and participating in the strategy and execution of cost reduction initiatives across LM Sites and supply base. Support design, fabrication, assembly, validation, and deployment of manufacturing tools and electromechanical systems that includes automated components such as robots, conveyors, vision systems and...

Standard Job Description As an Integration & Assembly Manufacturing Engineer, you will be primarily responsible for planning, preparing for, and executing air‑vehicle builds, as well as related testing and ground-support operations Key Responsibilities: Develop, implement, and refine hardware integration, assembly, manufacturing processes and build sequences. Collaborate with design engineering teams and other disciplines to provide feedback on designs and specifications, ensuring manufacturability and optimal use of available equipment and methods. Identify and resolve issues related to hardware, tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Respond to production issues and facilitate removal of build constraints with extreme ownership. Operate within a model-based engineering...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description Job Description : You will be the Manufacturing Engineer - Level 2 for the International Co-Production Manufacturing Engineering support team which is responsible for... What You Will Be Doing As the Manufacturing Engineer - Level 2 you will be responsible for improving sub assembly build processes and driving cost effective, high quality production for F 16 components. Your responsibilities will include: Support production operations by refining sub assembly processes, eliminating repetitive defects, and reducing unnecessary costs. Develop and modify manufacturing plans, interpreting engineering blueprints to support both production and prototype articles. Investigate and resolve non conformances through root cause analysis and corrective action implementation. Optimize machining strategies for CNC mills and lathes to produce precision components efficiently. Collaborate with quality, production, tooling, and engineering teams...

Description: Protecting what matters most is the mission that matters most. Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. Are you looking for a...

Description: As an Integration & Assembly Manufacturing Engineer, you will be primarily responsible for planning, preparing for, and executing air‑vehicle builds, as well as related testing and ground-support operations Key Responsibilities: Develop, implement, and refine hardware integration, assembly, manufacturing processes and build sequences. Collaborate with design engineering teams and other disciplines to provide feedback on designs and specifications, ensuring manufacturability and optimal use of available equipment and methods. Identify and resolve issues related to hardware, tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Respond to production issues and facilitate removal of build constraints with extreme ownership. Operate within a model-based engineering environment...

Description: As an Integration & Assembly Manufacturing Engineer, you will be primarily responsible for planning, preparing for, and executing air‑vehicle builds, as well as related testing and ground-support operations Key Responsibilities: Develop, implement, and refine hardware integration, assembly, manufacturing processes and build sequences. Collaborate with design engineering teams and other disciplines to provide feedback on designs and specifications, ensuring manufacturability and optimal use of available equipment and methods. Identify and resolve issues related to hardware, tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Respond to production issues and facilitate removal of build constraints with extreme ownership. Operate within a model-based engineering environment...

Description: You will be the Senior Manufacturing Engineer – Level 3 (PrSM Increment 2) for the PrSM Increment 2 Program Manufacturing Engineering team. Our team is responsible for delivering advanced manufacturing solutions that improve producibility of early designs, create robust manufacturing plans, and support the transition to low‑rate initial production. What You Will Be Doing As the Senior Manufacturing Engineer – Level 3 (PrSM Increment 2) you will be responsible for driving execution, integration, and continuous improvement of manufacturing processes across the program. Your responsibilities will include, but are not limited to: Manage day‑to‑day execution and close‑out of assigned manufacturing engineering tasks. Work with production teams to transition new products and processes into manufacturing. Partner with design and engineering teams to improve producibility and reduce production risk. Gather relevant data and prepare concise briefs...

Description: You will be a Manufacturing Engineer at Lockheed Martin's Archbald facility, which specializes in design, manufacturing, and engineering for both domestic and international customers. Our team produces electronic assemblies, machined and welded assemblies/parts, and safety-critical systems for various defense and commercial applications. Archbald is renowned for its awards and contributions to missile systems, nuclear instrumentation, and control products. What You Will Be Doing As a Manufacturing Engineer, you may support the Assembly and/or Fabrication areas depending on the project or assignment. Your responsibilities will include: Interfacing with design, manufacturing, test, quality, and other internal/external stakeholders as the product(s) move from planning to release, completion, and distribution Using SAP, dPLM, and other applications & tools to analyze and develop sequence of operations, work-instructions, procedures, and production...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Our portfolio spans more than 1,000 programs—including helicopters, integrated air and missile defense, littoral and undersea warfare, radar, electronic warfare, cyber solutions, C4ISR, and training and logistics systems—and supports the U.S. Air Force, Army, Coast Guard, Marine Corps, Navy, Missile Defense Agency, as well as intelligence, civil, commercial, and international military customers. THE WORK The Sr. Process Engineer will lead composite process development in Owego, defining new manufacturing methods that boost yield and reduce cost while...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Our portfolio features more than 1,000 programs, including helicopters, integrated air and missile defense, littoral warfare, undersea warfare, radar, electronic warfare, cyber solutions, C4ISR, and training and logistics systems. The business area supports the U.S. Air Force, U.S. Army, U.S. Coast Guard, U.S. Marine Corps, U.S. Navy and Missile Defense Agency, as well as intelligence, civil, commercial and international military customers. THE WORK The Sr. Process Engineer will lead composite process development work in Owego, defining new processes...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. As a Manufacturing Methods Engineer, you will shape the way our advanced defense systems are built, ensuring efficient, high quality production that supports critical national security objectives. Your expertise will directly influence the reliability and performance of mission critical hardware delivered to our customers. THE WORK The Manufacturing Methods Engineer is responsible for developing and optimizing assembly processes, creating clear documentation, and supporting operators across multiple programs. Working closely with design engineering,...

Description: What You Will Be Doing • The F-35 International Operations Engineer will be an expatriate assignment in Cameri, Italy, specifically providing technical assistance to Leonardo F-35 production. • This role will report directly to the Cameri site director and assist with implementation of strategic initiatives, daily/weekly/monthly reporting, and co-leading daily meetings to address production constraints • Partners with management and aids in the development of the team strategy for the Italy Technical Assistance Team (TAT), helping to identify opportunities to further improve Leonardo performance • Capable of analyzing the sequence of operations and workflows to improve efficiencies in plant production facilities, administrative processes, facility and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel • Conduct studies pertaining to cost control, cost reduction, inventory control, engineering time studies, and...

Description: You will be the Operations Excellence Engineer for the MFC LSS Organization. Our team is responsible for driving process improvement, increasing value delivery, and supporting strategic initiatives. What You Will Be Doing As the Operations Excellence Engineer you will be responsible for applying Lean and Six Sigma methodologies to solve complex, cross‑functional problems and to deploy to any business area to enhance processes. Your responsibilities will include, but are not limited to: Embed within functional teams to assess, prioritize, and execute improvement opportunities. Deploy to suppliers and sites to eliminate waste and drive sustainable solutions. Apply Lean/Six Sigma tools such as 6S, Standard Work, Visual Management, FMEA, and Control Charts to identify root causes. Define KPIs, track metrics, and deliver quantified results including cost savings and cycle‑time reductions. Prepare executive briefings and dashboards that...

Description: What You Will Be Doing This is a Manufacturing Engineer Sr Staff position on the Production Engineering (PE) F‑35 Strategic Corrective Action (SCA) team in Fort Worth, Texas. In this role dynamic role you will serve in a Technical Lead capacity, primarily supporting the Rework and Repair (R&R) Council, as well as other potential special assignments and Technical Lead duties as required. This high visibility role will allow you to work cross-functionally to develop and execute on the strategy to support the R&R reduction efforts across F-35 Production Operations. This role is essential to shaping the future of F-35 R&R strategy and must be comfortable periodically reporting to Senior Leadership including Director and VP level leaders. You will lead various project charters and support the cross functional teams as needed in their efforts to reduce R&R across the program. This will include investigations of manufacturing processes across multiple...

Description: What You Will Be Doing This is a Manufacturing Engineer Staff position on the Production Engineering (PE) F‑35 Strategic Corrective Action (SCA) team in Fort Worth, Texas. In this role you will lead investigations of manufacturing discrepancies across multiple build sections, applying Lean Six Sigma tools to uncover root causes, close process gaps, and develop corrective action plans. You will work closely with Quality Engineering and Production Operations, coordinate cross functional teams, promote creative problem solving, and drive product improvement initiatives. Throughout each corrective action effort you will project manage the work from initiation through verification and closure, while tracking key metrics to reduce variation and elevate overall product quality. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about...