17 field engineer jobs found

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Description: This position will be located at Amendola Air Base, Italy. The successful candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment (AFS) team's technical interface to the on-site customer (Operations and Maintenance) in resolving issues arising from maintenance or modification activities for all matters dealing with the F-35 aircraft. As a Nose to Tail (NTT) FSE, the preferred candidate will be a Subject Matter Expert (SME) in Avionics/Mission Systems (MS). It is also desired that the individual be an emerging authority in Vehicle Systems / APG (VS), and Supportable Low Observable (SLO)/Structures, with the skill set to accomplish troubleshooting and analysis of MS, VS, and SLO. What You Will Be Doing Responsibilities include: • Accomplish troubleshooting and analysis of difficulties experienced in the field. • Attend debriefings, to aid in the rapid identification of emerging issues that require company intervention to avoid aircraft...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description You will be the Tool Design Engineer for the Missiles and Fire Control team in Ocala. Our team is responsible for designing dies, gauges, jigs, fixtures, prototype models, and robotics end-of-arm tooling for production or experimental purposes.   What You Will Be Doing As the Tool Design Engineer, you will be responsible for utilizing 3D modeling software to conceptualize, create, and integrate industrial machinery, equipment, and tools. Your responsibilities will include: Designing dies, gauges, jigs, fixtures, harness boards, prototype models, and robotics end-of-arm tooling for production or experimental purposes. Accounting for various factors such as accessibility, ergonomics, safety, economy, mobility, and performance requirements while developing solutions. Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production...

Description: Lockheed Martin’s legacy of aviation excellence is built on perseverance, innovation, and a relentless drive to deliver mission‑critical results. As a Level 2 F-35 Wing Systems Manufacturing Engineer, you will work with senior engineers and cross‑functional teams, gaining exposure to the fundamentals of aircraft structural/systems manufacturing while contributing to continuous improvement initiatives, SRR reduction initiatives, tooling improvements, and engineering change management. What You Will Be Doing • Project Support – Assist senior engineers on production‑support initiatives such as SRR reduction, HPU reduction, and tooling refinements. • Documentation – Contribute to updates of Standard Operating Procedures (SOPs) and Manufacturing Plans under guidance. • Corrective Action Participation – Join corrective action reviews, execute assigned Corrective Action Plan (CAP) tasks, and track issue resolution. • CAD Assistance – Provide basic CAD support (CATIA...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. As a Manufacturing Methods Engineer, you will shape the way our advanced defense systems are built, ensuring efficient, high quality production that supports critical national security objectives. Your expertise will directly influence the reliability and performance of mission critical hardware delivered to our customers. THE WORK The Manufacturing Methods Engineer is responsible for developing and optimizing assembly processes, creating clear documentation, and supporting operators across multiple programs. Working closely with design engineering,...

Description: You will be the Chief Manufacturing Engineer - Producibility Owner - Level 6 for the Production Engineering team which is responsible for establishing and advancing producibility across the AMMM portfolio. What You Will Be Doing As the Chief Manufacturing Engineer - Producibility Owner - Level 6 you will be responsible for defining the Producibility Program, guiding design‑for‑manufacturability, and leading change‑control activities that enable high‑rate production. Your responsibilities will include: Establish and drive the Producibility Program, integrating shaping, deployment, and design‑for‑manufacturability with Design and Quality Engineering. Lead the Manufacturing Change Control Board (MCCB) as chair, overseeing configuration control and change‑management for all tooling and process updates. Partner with OpsTech to identify and implement technology‑integration opportunities that enhance producibility. Serve as the primary liaison...

Description: Job Description : The Production Integrator plays a critical role in the program by the leading the tactical execution team on the floor, known as the Vehicle Integration Team (VIT). The Production Integrator is an independent and capable Engineer that can lead a multidisciplinary team of engineers through the assembly process of their assigned VIT. Specific Job Duties: • This is primarily a 1st shift position but can require occasional support on alternate shifts • Raise awareness for schedule impacts • Work cross-functionally with all areas of the program to support integration of vehicle assembly • Schedule vehicle assembly with evolving priorities • Adjudicate any parts or engineering issues that arise during integration efforts • Document issues and work to resolve them with applicable stakeholders • Maintain a lessons learned database • This position is supporting the CM/CSM 5 VIT Team at KSC ATLO Orion Basic Qualifications: • Bachelor's...

Description: The ADP team is looking for a Sr. Fabrication Manufacturing Engineer to join our team in Palmdale, CA! What You Will Be Doing Lead small teams to ensure production needs are met and discrete deliverables are completed ahead of need. Conduct critical design reviews and collaborate with cross-functional teams to ensure alignment with manufacturing processes. Develop assembly plans and innovative solutions to address daily challenges, ensuring efficient production flow. Create and maintain detailed manufacturing products and documentation. Provide direct support on the production floor, troubleshooting issues and implementing solutions. Utilize Product Lifecycle Management (PLM) and Manufacturing Execution Systems (MES) to develop manufacturing processes. Interpret drawings and model-based designs, translating them into actionable steps for manufacturability for the production environment. Collaborate with team members to explore out-of-the-box thinking and...

Description: You will be the Industrial Engineer Sr. For the Industrial Engineering team. Our team is responsible for optimizing manufacturing processes, improving efficiency, and reducing costs, with a strong emphasis on analytical skills to drive data‑driven decision making. What You Will Be Doing As the Industrial Engineer Sr., you will lead space‑planning initiatives across our manufacturing footprint and drive cross‑functional projects that improve productivity, elevate quality, and eliminate waste. You will be the go‑to champion for scaling production while optimizing factory layout and implementing lean principles. Your responsibilities will include, but are not limited to: Redesign shop‑floor layouts – Partner with the shop‑floor Industrial Engineering team to re‑configure cell layouts, optimize material flow, and position equipment for maximum utilization and throughput. Scale production capacity - Develop and implement layout strategies that...

About the role The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will focus on involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Manufacturing Engineer is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. The...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Description: You will be the Data Analyst Sr - Level 3 for the Lockheed Martin Aeronautics team which is responsible for turning raw data into actionable insights that drive business decisions. What You Will Be Doing As the Data Analyst Sr - Level 3 you will be responsible for collecting, transforming, and analyzing data to provide clear, data‑driven recommendations to cross‑functional stakeholders. Your responsibilities will include: Extract, clean, and transform data from multiple sources while maintaining data integrity and documentation. Perform exploratory analysis, develop statistical models, and create forecasts to support business planning. Build and maintain standard and ad‑hoc reports, dashboards, and visualizations using tools such as Tableau or Power BI. Translate technical findings into concise business recommendations and collaborate with data engineers, product owners, and leaders. Identify automation opportunities and contribute to...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Our portfolio spans more than 1,000 programs—including helicopters, integrated air and missile defense, littoral and undersea warfare, radar, electronic warfare, cyber solutions, C4ISR, and training and logistics systems—and supports the U.S. Air Force, Army, Coast Guard, Marine Corps, Navy, Missile Defense Agency, as well as intelligence, civil, commercial, and international military customers. THE WORK The Sr. Process Engineer will lead composite process development in Owego, defining new manufacturing methods that boost yield and reduce cost while...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Our portfolio features more than 1,000 programs, including helicopters, integrated air and missile defense, littoral warfare, undersea warfare, radar, electronic warfare, cyber solutions, C4ISR, and training and logistics systems. The business area supports the U.S. Air Force, U.S. Army, U.S. Coast Guard, U.S. Marine Corps, U.S. Navy and Missile Defense Agency, as well as intelligence, civil, commercial and international military customers. THE WORK The Sr. Process Engineer will lead composite process development work in Owego, defining new processes...

Description: You will be the Optics Manufacturing Engineer for the Missiles and Fire Control (MFC) team. Our team is responsible for delivering best‑in‑class optical components and systems—using optical grinding/polishing, precision fabrication, and lean manufacturing—to meet demanding defense missions. What You Will Be Doing As the Optics Manufacturing Engineer you will support the production of precision optical components leveraging grinding, polishing, and other high‑precision optical fabrications. Your responsibilities will include, but are not limited to: Providing technical guidance and hands‑on support to optical operators to achieve peak performance. Designing, documenting, and sustaining manufacturing and test plans for non‑recurring effort (NRE) projects, then transitioning those plans into full‑rate production. Applying lean manufacturing techniques to reduce cost, improve yield, and streamline workflow. Investigating root‑cause of...