127 electronics jobs found

Description: Test Engineering department designs and fabricates equipment that will be used in the development and manufacture of tactical hardware. We are seeking early career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes. Specific Job Description: Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies. The fabrication of wiring harnesses will require connector pinning, de-pinning, and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas. This position will provide the opportunity for the candidate...

Description: You will be the Aircraft Electrical & Electronics Mechanic - Fabrication for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - Fabrication, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and...

Description: You will be the Manufacturing Engineer (Electronics Fabrication, Level 2) for the Missiles & Fire Control Manufacturing team. Our team is responsible for developing and supporting manufacturing processes for electrical components within the MFC electrical shop. What You Will Be Doing As the Manufacturing Engineer (Electronics Fabrication, Level 2) you will be responsible for delivering robust, repeatable processes that enable high‑quality wiring and harness assemblies. Your responsibilities will include, but are not limited to: Develop and support manufacturing processes for wiring and harness assemblies. Create and maintain work instructions and task lists. Develop rework/repair instructions based on quality notifications. Participate in design and producibility reviews and drive process improvements. Validate new equipment and processes, and collaborate with shop‑floor, quality, and program teams. Why Join Us The ideal...

Description: The primary responsibility for this role is to support the Additive Manufacturing Lab and the Innovation Center. What You Will Be Doing Candidate will work with maintaining 3D-printers and support lab engineering build of 3-D printing. This person will be required to perform all functions associated with the additive manufacturing process which includes, but is not limited to, machine operation, hands-on post-processing, specification compliance, completeness, accuracy, design soundness, interpretation of ANSI Y14.5 drawing and GD&T standards, fabrication, assembly, installation, customer interface, and data management. In addition, the candidate will support the Lockheed Martin Innovation center, which is a collaborative space outfitted with multiple capabilities including 3D printers, laser cutters, waterjet, and virtual reality equipment. The candidate will assist with maintaining equipment, helping customers use the capabilities effectively, and other...

Position: Programming Machine Operator I Job Description: Arrow Electronics | Reno, NV Shift: 8:00 AM – 4:30 PM, Monday–Friday. 4:00 PM – 12:30 AM, Monday–Friday. Hourly Rate: $19.00 USD Hourly Pay: up to $21.50 USD for hours worked between 6:00 PM – 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for motivated and reliable team members to join our fast-paced electronics repair and processing facility. We offer steady employment, solid pay, excellent benefits, and opportunities for growth. If you enjoy staying active, hands-on operational tasks, and being part of a strong team, this role is for you. What You'll Be Doing:   Bag and Tag:   Accurately bag and tag items according to specifications. Kitting:   Assemble kits with the correct components and materials. Cutting:   Perform cutting tasks using the assigned equipment. Machine Operation:   Safely and efficiently operate...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin Space is seeking a full-time Sr. Production Planner. The successful candidate will have strong understanding of electronic components and manufacturing processes. Basic Qualifications: • Strong understanding of electronic...

Description: Role Overview: As an Electro-Mechanical Technician, you will build and test hardware used in aerospace and space systems. This is a hands-on role focused on assembling, modifying, and troubleshooting high-reliability components that support critical missions. Key Responsibilities: • Assemble mechanical, electrical, and electromechanical hardware • Fabricate, bond, solder, and build components using detailed instructions • Disassemble, modify, rework, and test assemblies • Read and follow engineering drawings, schematics, and wiring diagrams • Perform both repetitive and custom assembly tasks with precision • Troubleshoot issues and support corrective actions with engineering and quality teams • Identify and help resolve production or process issues • Follow safety, training, and quality standards in a regulated environment • Support production schedules, including shift work and overtime as needed Work Environment: • Hands-on manufacturing and fabrication...

Description: WHAT WE’RE DOING At Sikorsky, a Lockheed Martin Company, we are at the forefront of aerospace innovation, driving the development and deployment of cutting-edge technology in the field of aviation. We solve the great problems of our times and innovative technologies that define eras. While no one knows what's going to change the world next, our people are already working on it. THE WORK This position is for a Senior Manufacturing Engineer working in the Aerostructures Manufacturing Engineering group FMC Product Center as a CNC Programmer/ME. Candidate needs to have a strong CNC programing background as well as Manufacturing Engineering and processing background. Responsible for developing and writing programs for numerically controlled extrusion milling machines using engineering specifications and drawings. Our team is responsible for ensuring that parts are machined accurately and efficiently, and that programs are optimized for production. As a key...

Description: You will be the Sr Process Technician located at Santa Barbara Focalplane in Goleta, California. The Santa Barbara team oversees Detector/Semiconductor Fabrication, Focal Plane Array, Microelectronics, and/or Electronics. What You Will Be Doing As a Sr Process Technician, you will be working with Integrated Detector Dewar Cooler Assembly (IDDCA) manufacturing and test. This will include precision Mechanical Manufacturing and Assembly in Clean Room Environment (Class 100, 1000, 10000). You will need to utilize Sensitive Welding Equipment, Semi Automated Ovens, Cleaning, High Precision Metrology and Inspections Systems, and Vacuum Equipment. As a Senior Process Technician, you should be able to perform all aspects of the following semiconductor device processes: Photoresist application, delineation and removal; preparation and use of wet chemical processes needed to etch and prepare semiconductor surfaces and etch patterns in semiconductor,...

Description: You will be the Process Technician located at Santa Barbara Focalplane in Goleta, California. The Santa Barbara team oversees Detector/Semiconductor Fabrication, Focal Plane Array, Microelectronics, and/or Electronics. What You Will Be Doing As a Process Technician, you will be working with Integrated Detector Dewar Cooler Assembly (IDDCA) manufacturing and test. This will include precision Mechanical Manufacturing and Assembly in Clean Room Environment (Class 100, 1000, 10000). You will need to utilize Sensitive Welding Equipment, Semi Automated Ovens, Cleaning, High Precision Metrology and Inspections Systems, and Vacuum Equipment. As a Process Technician, you should be able to perform all aspects of the following semiconductor device processes: Photoresist application, delineation and removal; preparation and use of wet chemical processes needed to etch and prepare semiconductor surfaces and etch patterns in semiconductor, dielectric and metal...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to deliver exceptional quality and innovative solutions to support our customers and our internal teams. Guided by integrity and excellence, we believe that by leveraging advanced technologies and fostering collaboration across sites and teams, we can meet and exceed even the most challenging expectations. As a Lockheed Martin employee, you will have the opportunity to make a meaningful impact in manufacturing, engineering, and ensuring quality excellence in every product we deliver. THE WORK This requisition is for a Quality professional supporting the Rotary and Mission Systems (RMS) business area at the Electronics Production Center (EPC) in Clearwater, Florida. This position will interact directly with program teams at the site and multiple Lockheed Martin sites that we provide assemblies to, including Circuit Card Assemblies (CCAs), cables, and box-level assemblies. You...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK The incumbent will identify the daily PCB-loading list. • Check the component received from component preparation section and insert them correctly as per the instructions. • Ensure the leads performed are correct fit. • Check the placement and that inserted components are straight. • Bend the component leads extending through the holes and use adhesive to glue the components to PCB after insertion as per standard operating procedure • Mount the components firmly on the board using hand tools as per circuit diagram. • Hand over the assembled boards to...

Description: The ideal candidate will bring extensive industrial experience in the design, assembly, integration and testing of spacecraft electronics. The role requires both deep and technical knowledge in the focus areas of Printed Circuit Board, Circuit Card Assembly, Electronics Packaging and Wire and Harness Design and the ability to advise, mentor and engage with senior government stakeholders. Within IGNITE, you will work in the Severn Operations Manufacturing Team providing support to internal and external customers. We're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Key Responsibilities: • Understanding of manufacturing concepts and processes for production applications...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree plus 6 months of job-related experience.     CLEARANCE REQUIREMENTS: Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position We are seeking a highly skilled Manufacturing Engineer to support the Micro-Electronics value stream in a Low Volume, Medium Mix, High Value manufacturing facility for spaceflight hardware. The successful candidate will work in a small team environment and will be responsible for ensuring the efficient and effective manufacturing of high-quality...

Description: Join our Test Engineering Fabrication team as a Mechanical Fabricator supporting the development and build of mission-critical test equipment. In this hands-on role, you will be responsible for manufacturing, modifying, and assembling mechanical components used in complex electrical test systems that support a variety of defense programs. You will work in a machine shop environment producing custom metal parts and modifying purchased hardware to meet engineering requirements. This role requires the ability to interpret engineering drawings, select appropriate fabrication methods, and execute work with a high level of precision and quality. Work may include machining, drilling, tapping, cutting, fitting, and mechanical assembly of components that integrate into larger test systems. In addition to fabrication, you will support troubleshooting, rework, and continuous improvement efforts. You will collaborate closely with engineers, planners, and electrical fabrication...

Description: You will be the Field Tactical Trainer Technician for the Fort Irwin Javelin Program Team. Our team keeps the Javelin Field Tactical Trainer running flawlessly at the National Training Center, delivering critical live fire training for warfighters. What You Will Be Doing As the Field Tactical Trainer Technician you will be the on site expert who repairs, stocks, and issues the trainer system while supporting all related logistics. Working full time at Fort Irwin, you will diagnose electronic hardware, perform preventative maintenance, and keep the supply chain humming—all with minimal supervision and a focus on delivering high quality results in a fast moving depot environment. Your responsibilities will include: • Perform repairs and upgrades on the Javelin Field Tactical Trainer using commercial and program specific test equipment. • Follow engineering drawings and site specific procedures to diagnose electronic faults and implement approved solutions. •...

Description: The coolest jobs on this planet… or any other… are with Lockheed Martin Space. Lockheed Martin is a pioneer, partner, innovator and builder. Our amazing people are on a mission to make a difference in the world and every single day we use our skills and experiences to create, design and build solutions to some of the worlds’ hardest engineering problems. Do you want to join a team where employees envision the impossible, perform with excellence and build incredible products? We are creating a better today and tomorrow by seamlessly aligning diversity and inclusion efforts with Lockheed Martin’s values and business strategy. We are also committed to enabling transitioning veterans to connect with their communities and find new purpose as they reintegrate into civilian life. By clicking on the links, you can find out more on how we proudly support Global Diversity and Hiring Our Heroes. Do you have a passion and dream to be a difference maker? Are you looking for a...

Description: You will be the Manufacturing Robotics and Automation Engineering Manager, providing technical management direction to a team of Robotics Engineers in the Advanced Manufacturing Technologies (AMT) team in the Grand Prairie, TX facility. Our team is tasked with the manufacturing automation and robotics solutions for Missiles and Fire Control. What You Will Be Doing As the Robotics and Automation Engineering Leader in Grand Prairie, you will be responsible for overseeing cost, schedule, technical planning, risk and opportunity management, and interfacing closely with customer and supplier counterparts. You will lead a team of engineers, providing technical guidance and direction, and ensuring standard technical processes and tools are implemented to meet program needs. You will also be responsible for the review of automation designs, including providing producibility feedback that includes impact on both current and future designs. You will lead the preparedness of...

Description: You will be the Production Planner Sr. for the Production Planning Team. Our team is responsible for optimizing manufacturing workflows and ensuring seamless shop‑floor operations. What You Will Be Doing As the Production Planner Sr. you will be responsible for driving manufacturing efficiency and supporting the shop‑floor team. Your responsibilities will include, but are not limited to: Create and standardize next‑generation manufacturing work instructions. Support shop‑floor operators, gather feedback, and resolve work stoppages through hardware support and continuous‑improvement initiatives. Conduct training for shop‑floor personnel on manufacturing processes. Interpret assembly drawings and specifications to define manufacturing steps that meet all requirements. Apply mechanical aptitude to conceptualize assemblies, considering material properties, heat transfer, and structural characteristics. Why Join Us The ideal...

Description: ANTICIPATED COHORT START DATE: June 29, 2026 ● This occupation requires the assembly of solar devices and batteries where planning and sequencing of operations has been determined and supported by clearly defined operation sheets and instructions. ● Set-up, adjust and operate automatic solar cell soldering or brazing machines, prepare and attach cell assemblies to rigid or flexible substrates per blueprint and manufacturing process specifications. ● Prepare and similarly attach various solar cell cover filters on solar modules. ● Solder electrical components or place in ovens or under lights for specified times in heat cycle. ● Perform in process heat soak and electrical continuity checks. ● Perform rework wherein the operations are essentially the same as those required for work described herein. --- ● IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, Vandenburg Air Force Base or Eastern Range facilities...