46 jobs found in Andover, MA

Description: You will be the Production Operations Sr. Manager that serves as the senior operations lead for the site. Reporting directly to the Site Director, in this newly combined role you will lead both Production Operations and Production Planning & Control organizations. You will own end-to-end execution of cost and schedule production performance across the factory while building high-performing teams to support our continued ramp-up and expansions. What You Will Be Doing As the Production Operations Sr. Manager, your Key Responsibilities will include: Provide strategic and hands-on leadership to Production Operations, the Production Planning & Control (PP&C) team, and the Performance Management (PMT) teams Develop, coach, and grow talent at all levels - with a deep appreciation for the frontline workforce and a visible, engaging presence on the factory floor Deliver consistent site output by meeting weekly standard hour targets and...

Description: You will be a Microwave Assembler for our team, responsible for performing fabrication or modification tasks on RF Microwave hybrid microcircuits and sub-assemblies. Our team is dedicated to delivering high-quality products, and we're looking for a skilled professional to join our team. What You Will Be Doing As a Microwave Assembler, your responsibilities will include: Installation of connectors, substrates, components and modules in highly complex microwave assemblies, often utilizing using paste and sheet epoxies Performs disassembly, assembly, modification, rework and repair operations on various pre-production subassemblies, assemblies and complete systems that utilize integrated circuit technology Performs the above operations after the units have been rejected by testing and are sent back with test failure sheets, isolating the problem area Plans work sequence by assessing available work in progress to meet schedule requirements...

Description: You will be the Test Technician for the Testing team. Our team is responsible for setting up and executing electronic assembly tests to ensure product performance and quality. What You Will Be Doing As the Test Technician you will be responsible for configuring test apparatus, performing electrical and RF measurements, and analyzing results to validate product specifications. Your responsibilities will include, but are not limited to: Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences. Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams. Identifies malfunctions by making adjustments or troubleshooting circuit cards. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Performs tests and suggests modifications...

Description: You will be a Stock Assistant for our team in Chelmsford, MA, supporting our microelectronics operations. Our team is dedicated to producing advanced technology solutions that safeguard national security and advance the industry. What You Will Be Doing As a Stock Assistant in Chelmsford, your primary responsibilities will include: Prepare assembly kits for issue to the manufacturing floor in a manner which meets established standards of quality and schedule Work from pre-printed kit sheets and layout diagrams, in order to efficiently kit materials from stockroom inventory Verify SAP system/Warehouse Mgt System vs. physical inventory, identify anomalies, and initiate corrective actions in accordance with established procedures Accurately perform daily cycle counts on existing inventory and ensure parts are properly packed and correctly labeled Requires knowledge of warehousing and stockroom practices, such as receiving, stocking, and...

Description: You will be a Manufacturing Engineer, responsible for overseeing the production of microwave hybrids, including the design of assembly techniques and materials. Our team is dedicated to delivering high-quality products, and we're looking for a skilled and experienced engineer like you to join our team. What You Will Be Doing As a Manufacturing Engineer, you will have a deep understanding of all assembly techniques and materials used to produce microwave hybrids, including substrate and die epoxy attach, wire bonding, and other processes. Your responsibilities will include, but are not limited to: Understand and apply your experience with J-STD-001 solder assembly, conductive epoxy. Attach of substrates and semiconductor die, gold wedge and ball-bonding, and seal / hermeticity testing. Design the sequence of operations and specify procedures for the fabrication of tooling and other functions that affect product performance. Inspect...

Description: You will be the Production Planning & Control (PP&C) Associate Manager, leading a team of Make Planners and shop floor support staff. This team plays a crucial role in coordinating product flow across multiple programs within our manufacturing facility. What You Will Be Doing As the Production Planning & Control (PP&C) Associate Manager, your responsibilities will include, but are not limited to: Manage a team of Make Planners and PP&C support staff to ensure smooth product flow throughout the shop floor for various programs Coordinate daily activities with counterparts in manufacturing, quality, and engineering to maintain efficient operations Develop and implement release strategies to meet schedule commitments and recover schedule Evaluate staffing needs and realign team members as necessary to achieve operational goals Monitor, develop, and track key metrics critical to operational success, providing regular...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position The Manufacturing Software Engineer is responsible for developing, and maintaining automated manufacturing methods, processes, and operations for new and existing products. This role involves working closely with design engineering, managing manufacturing process capital, and...

Basic Qualifications High School diploma or equivalent is required plus a minimum of 4 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position magine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they’re often classified. That’s what you’ll find at General Dynamics Mission Systems. Here you’ll lead amazing engineers as they invent the technologies, products and services that help our service members, intelligence analysts and first responders keep our nation safe. If you want the chance to lead, it’s...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Candidates must be able to obtain a Secret clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation’s heroes keep our nation safe. The work we do is so advanced,...

Basic Qualifications Bachelor's degree or equivalent is required plus a minimum of 2 years of relevant experience; or Master's degree plus a minimum of 0 years of relevant experience   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position   General Dynamics Mission Systems has an immediate opening for a Deputy Project Manager of Operations (DPMO) supporting our Strategic Weapons Control (SWC) line of business. The position provides an opportunity to enhance the performance and profitability of an organization that supports some of our nation’s fundamental defense services....

Basic Qualifications Bachelor’s degree or equivalent relevant experience is required, plus a minimum of 2 years of relevant experience; or Master's degree. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position General Dynamics Mission Systems has an immediate opening for a Sea Launched Cruise Missile-Nuclear (SLCM-N) Deputy Project Manager of Operations (DPMO).  The position provides an opportunity to enhance the performance and profitability of an organization that supports some of our nation’s fundamental defense services.  General Dynamics Mission Systems employees work...

Basic Qualifications Education:  High school diploma or general education degree (GED) required.  Minimum of 2 years of testing of electrical / electronics and associated measurement equipment or equivalent technical training in electronics or electrical systems is required.    Responsibilities for this Position Job Description General Dynamics Mission Systems (GDMS), a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to our customers.  GDMS has an immediate opening for a Test - Electrical / Electronics .  The position provides an opportunity to enhance the performance and profitability of an organization that supports some of our nation’s fundamental defense services.  General Dynamics Mission Systems employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions....

Basic Qualifications Requires a Bachelor’s degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.       CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they're often classified. That's what you'll find at General Dynamics Mission Systems. Here you'll work with amazing engineers as they invent the...

Basic Qualifications Requires a Bachelor’s degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they're often classified. That's what you'll find at General Dynamics Mission Systems. Here you'll work with amazing engineers as they invent the technologies,...

Basic Qualifications Requires a Bachelor’s degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you’ll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering or Mathematics field.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position While showing initiative, you’ll coordinate and perform cross functional tasks in support of the operations/manufacturing organization. The Manufacturing Engineering will develop strong communications with internal teams to estimate manufacturing costs, determine time standards and make recommendations for tooling and process requirements of new or existing product lines.  We...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Help make the technologies, products and services that make a difference. That’s the opportunity that’s waiting for you at General Dynamics Mission Systems. We help our nation’s heroes keep our nation safe by creating solutions so advanced, they...

Basic Qualifications Requires a Bachelor’s degree in Reliability, Electrical, Mechanical or Materials Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As a Printed Circuit Board Design Hardware Engineer, you'll be a member of a cross functional team responsible for the following: Assist the Electrical Engineering product design team in the layout of high speed/high density...

Basic Qualifications Bachelor’s degree or equivalent is required plus a minimum of 5 years of relevant experience; or Master's degree or equivalent plus a minimum of 3 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you’ll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as...

Basic Qualifications Bachelor’s degree or equivalent is required plus a minimum of 8 years of relevant experience; or Master's degree or equivalent plus a minimum of 6 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation’s heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what’s possible. Here you’ll work with the best and your talent will be front and center on projects that impact the world....