49 jobs found in Atlanta, GA

Description: What You Will Be Doing • Production Floor Support: Provide on-the-spot assistance to resolve production issues, ensuring uninterrupted product flow. • Corrective Action Development: Design and implement corrective actions to reduce Scrap, Rework, and Repair (SRR) rates and decrease Hours Per Unit (HPU). • Manufacturing Plan Updates: Update and improve the Manufacturing Plan to integrate new technologies and reduce defect rates. • Engineering Change Evaluations: Assess engineering modifications to ensure alignment with production capabilities and efficient implementation. • Technical Production Support: Offer technical expertise to Production Operations, supporting mechanics and other team members for smooth operation. • Cost Reduction Initiatives: Lead initiatives focused on product span optimization and cost reduction to enhance profitability. • Manufacturing Engineering Duties: Execute key tasks such as Tool Trial Runs, Work-Around Plans, and Supplemental Tool...

Description: Lockheed Martin is seeking a Multi-Functional Manufacturing Supervisor (Level 3) to lead a team of 8-10 hourly bargaining unit associates in C-130J Final Assembly production. This role is instrumental in ensuring cost, schedule, and quality performance, while implementing lean manufacturing principles to drive continuous improvement and operational excellence. What You Will Be Doing Leadership & Supervision: • Supervise a team of 8-10 hourly bargaining unit associates in C-130J Final Assembly production. • Oversee employee training, performance management, and compliance documentation. • Partner with human resources and union stewards to address and resolve employee-related matters. Production & Process Management: • Implement lean manufacturing principles to optimize production efficiency and reduce waste. • Set and prioritize tasks to support and exceed production schedules. • Conduct investigations and problem resolution activities as required. • Manage...

Description: You will be the Assembly Worker Structures Sr - C130 for the team which is responsible for laying out and locating structural components or assemblies in making production assemblies as specified by design changes. What You Will Be Doing As the Assembly Worker Structures Sr - C130, you will be responsible for performing difficult structural pick-up and/or rework such as removing, replacing, or realigning ribs, bulkheads, stringers, or fittings in completed skinned assemblies. Your responsibilities will include: Working structural changes which materially alter previous assembly references and practice Performing trimming, reforming, and altering parts and structures as required Fabricating detail parts such as shims, splices, gussets, angles, brackets, doublers, stiffeners, and patches Performing portable milling operations on wing and center section attaching joints Improvising shop aids to facilitate assembly and installation as...

Description: Step into a leadership role where you’ll drive hands-on production excellence as an Assembly Supervisor ADP – Level 3 with Lockheed Martin in Marietta. You’ll lead and develop a high-performing team, partnering across functions to deliver quality work safely, on schedule, and to exacting standards. This role is ideal for a proactive leader who thrives in a fast-paced environment and is passionate about building team culture while driving continuous improvement. If you’re ready to make a visible impact on operations and people, this is your opportunity. What You Will Be Doing Directly responsible for the day-to-day execution of the work plan. Cross-functional collaboration with many teams. Lead and mentor the touch labor work force. Culture leader and grower. Ensure work is accomplished in accordance with company, customer, and engineering requirements. Responsible for creating and adjusting work assignments to meet tactical and strategic goals. Set...

Description: This position supports the Tool Services team. This position includes understanding standard tools required to build aircraft/sub-assemblies, troubleshooting and repairing system software issues in CribMaster, coordinating procuring tools needed for production, and enhancing system requirements for improved tool accountability and traceability within Aeronautics. What You Will Be Doing The successful candidate will analyze data to develop improved report requirements. They will research tool control technology used in the industry to identify possible enhanced solutions that will eliminate manual processes and improve traceability. They will make recommendations based on data analysis, development, and execute plans for approved projects. The position requires managing multiple projects simultaneously, reporting their status, and driving projects to completion. The individual will also create training documentation and visual aids to ensure tool compliance and...

Description: Lead the AMMM Production Engineering Team responsible for Tool Engineering, NC Programming, & Planning execution. Responsibilities will cover programs and scope associated with C130J, C5, site Fabrication, Marietta F-22 support, and some special projects / programs. Responsible for day to day operations of the Production Engineering Teams that manage the design and application of Tool Engineering, Planning Operations, NC programming and related system interfaces. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big,...

Description: This position is within the Replenishment Center Operation’s (RCO) team supporting AMMM, F-22, F-35, F-16, ADP and sustainment programs with the following responsibilities: What You Will Be Doing -Supervises represented personnel, supporting a two- shift operation -Oversees and monitors key performance indicators related to Inventory and Production Control shop floor activities for parts movement and requirement planning -Monitors material requirements to mitigate negative impacts on production -Oversees inventory control and compliance -Oversees all receiving activity and compliance -Oversees all kitting activity and compliance -Supports warehouse quality control and compliance - Controls the flow of materials through the RCO processes to the shop floor or to support external needs - Monitors schedule execution to program plan - Ensures material requirements are satisfied to mitigate parts constraints and other negative impacts to production What’s In It For...

Description: Lockheed Martin Aeronautics in Marietta, Georgia is looking for a Level 3 Full‑Stack Applications Engineer to power the digital backbone of the C-130 Hercules and the F‑35 Joint Strike Fighter assembly and test facility. As a Forward Deployed Engineer, you’ll build modern, scalable web apps with React, Angular, .NET Core, Node.js, Docker/Kubernetes, and cloud services, turning complex production data into intuitive interfaces that streamline workflows and boost efficiency. What makes this role unique is the hands‑on collaboration with Production Operations — you’ll spend time shadowing on the shop floor and in business meetings listening for pain points to rapidly prototype solutions. Join a mission‑critical environment where your code directly supports a world‑class defense platform, benefit from top‑tier mentors, competitive compensation, and a culture that prizes innovation, safety, and impact. If you thrive at the intersection of cutting‑edge web development and...

Description: Lays out and locates structural components or assemblies in making production assemblies as specified by design changes, working from blueprints or other authorized documents. Performs difficult structural pick-up and/or rework such as removing, replacing or realigning ribs, bulkheads, stringers, or fittings in completed skinned assemblies, or where a considerable portion of the operation consists of reforming, recontouring or refitting to provide an acceptable assembly. Works structural changes which materially alter previous assembly references and practice. Performs trimming, reforming and altering parts and structures as required. Fabricates detail parts such as shims, splices, gussets, angles, brackets, doublers, stiffeners and patches. Performs portable milling operations on wing and center section attaching joints. Must be able to layout and secure coordination of assemblies working to station, water, center, butt, and chord lines shown on engineering...

Description: You will be the C130J Flight line Associate Manager - Level 4 for the Flight Line Operations team which is responsible for leading flight and delivery operations on the C‑130 program. What You Will Be Doing As the C130J Flight line Associate Manager - Level 4 you will be responsible for driving staffing, cost, schedule, and quality performance while fostering a culture of accountability across all shifts. Your responsibilities will include: Manage Flight Line team staffing, cost, schedule, and quality metrics to meet program objectives. Apply accountability tools and concepts to ensure clear communication and seamless handoffs between shifts. Implement and champion the Aircraft Manufacturing System (AMS), motivating the team to adopt best practices. Prepare and deliver briefings to multiple levels of internal leadership and the customer on program status. Demonstrate Full Spectrum Leadership behaviors and embed a culture of...

Description: You will be the Flight Line Electrician - C130 for the team which is responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service complex aircraft electrical systems equipment. What You Will Be Doing As the Flight Line Electrician - C130, you will be responsible for mocking up, fabricating, and installing experimental systems and equipment and performing final flight-servicing, troubleshooting, and operational checkout before and after flight to ensure airworthiness and conformance to applicable design specifications. Your responsibilities will include: Conducting power plant runs or working with mechanics in conducting such runs; making adjustments and replacements of electrical components and accessories Investigating any malfunctioning of electrical equipment before and after flight test; analyzing systems and diagnosing trouble Performing necessary operations to correct trouble,...

Description: You will be the Flight Line Test Mechanic C-130 for the team which is responsible for performing the servicing and troubleshooting of complex aircraft systems. What You Will Be Doing As the Flight Line Test Mechanic C-130, you will be responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service aircraft structures, hydraulic and plumbing, rigging, and mechanical systems, and power plants requiring ingenuity in deviating from standard practices and in adapting and altering structures and systems configurations to meet special requirements. Your responsibilities will include: Making changes and replacements to hydraulic, plumbing, and rigging systems, fuel and oil units, power plants, etc. Making any permissible adjustments to ship's systems in order that they meet flight line requirements Mocking-up, fabricating, and installing new parts, structures, and systems and performing final flight...

Description: You will be the Production Assembler - F35 for the team which is responsible for assembling and installing various components of the F35 aircraft. What You Will Be Doing As the Production Assembler - F35, you will be responsible for using jigs and fixtures, rivet upsetting and bench assembly equipment, and hand tools to assemble and install components. Your responsibilities will include: Using rules, squares, protractors, and dividers to ensure accurate assembly and installation Reading and interpreting detail, assembly, and installation blueprints or other authorized documents to obtain assembly and installation information and material callouts Using arithmetic, including decimals and fractions, to perform calculations and measurements Working to tolerances as required for the type of work described herein Assembling and installing components using jigs and fixtures, rivet upsetting and bench assembly equipment, and hand tools...

Description: You will be the Aircraft Electrical & Electronics Mechanic - Fabrication for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - Fabrication, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and...

Description: What You Will Be Doing This role will be responsible for the integration of functional Industrial Engineering solutions for C-130 Assembly by creating, analyzing, and monitoring health metrics, producing production plans and supporting continuous improvement activities. Individual will support Production through engagement and consultation with the team. Must engage daily Manufacturing Engineering, Production Management, and a variety of Production support functions. The successful candidate will have experience and/or knowledge of developing production/process plans, using statistical analysis, and gathering/analyzing data for presentations to leadership. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers...

Description: What You Will Be Doing This role will be responsible for the integration of functional Industrial Engineering solutions for C-130 Flight Line operations by analyzing and developing production plans, creating and monitoring Flight Line health metrics and continuous improvement activities. Individual will strive to enhance all Flight Line related activities through engagement and consultation with the team. Must engage daily Manufacturing Engineering, Production Management, and a variety of Production support functions. What’s In It For You: 3 day weekends every weekend! From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to...

Description: This manufacturing planner position is within the RCO supporting AMMM, F-22, F-35, F-16, ADP and sustainment programs with the following responsibilities: What You Will Be Doing -Supports all Kanban activity and maintenance -Supports Wire replenishment activity and maintenance -Supports RCO Project planning and execution -Supports inventory management, control and compliance -Supports warehouse quality control and compliance - Supports material requirements for Production SWBS'S to ensure a controlled flow of approved materials timed to meet production requirements - Monitors key performance indicators related to RCO warehouse activities, parts movement and requirement planning - Ensures material requirements are satisfied to mitigate parts constraints and other negative impacts to production - Utilizes Shop Floor Control and MRP working knowledge to support requirements planning and execution for the Component Build areas. -Monitors the flow of materials...

Description: You will be the Machinist General/ Set-up for the team which is responsible for planning, laying out work for setting up, and operating various types of power feed milling machines and automatic electrically or hydraulically controlled duplicating and profiling machine tools. What You Will Be Doing As the Machinist General/ Set-up, you will be responsible for setting up power machine tools and operating machines for trial runs and to make short runs on complex parts. Your responsibilities will include: Setting up and operating computer numerically controlled (CNC) milling machines fully utilizing preprogrammed operations and subroutines Recording data and commands for subsequent use by assigned machine operators or machinists Setting up and operating standard power machine tools such as broaching machines, semi-automatic boring machine, single and multiple spindle drill press, radial drill press, shaper, planer, boring mill, milling machine,...

Description: You will be the Machinist General/ Set-up for the team which is responsible for planning, laying out work for setting up, and operating various types of power feed milling machines and automatic electrically or hydraulically controlled duplicating and profiling machine tools. What You Will Be Doing As the Machinist General/ Set-up, you will be responsible for setting up power machine tools and operating machines for trial runs and to make short runs on complex parts. Your responsibilities will include: Setting up and operating computer numerically controlled (CNC) milling machines fully utilizing preprogrammed operations and subroutines Recording data and commands for subsequent use by assigned machine operators or machinists Setting up and operating standard power machine tools such as broaching machines, semi-automatic boring machine, single and multiple spindle drill press, radial drill press, shaper, planer, boring mill, milling machine,...

Description: You will be the Trainer Structural Maintenance - Level 4 for the C‑130 Production Line Training team which is responsible for developing the next generation of mechanics and on‑the‑job trainers. What You Will Be Doing As the Trainer Structural Maintenance - Level 4 you will be responsible for delivering hands‑on guidance, mentorship, and skill development to mechanics and junior trainers on the C‑130 production line. Your responsibilities will include: Provide direct on‑the‑job training to mechanics, ensuring quality workmanship and adherence to structural maintenance standards. Mentor and coach less‑experienced trainers, building their ability to teach and improve floor‑level proficiency. Develop and update training materials, work instructions, and standard operating procedures. Assess trainee performance, give constructive feedback, and track skill progression. Collaborate with production leads to align training activities with...