21 program management jobs found in Orlando, FL

Description: You will be the Manufacturing Planner Staff for the Production Planning & Control (PP&C) team. Our team is responsible for planning activities associated with Manufacturing Resource Planning (MRP) transactions and supporting program‑wide manufacturing activities across multiple Missiles & Fire Control sites. What You Will Be Doing As the Manufacturing Planner Staff you will be the hub that synchronizes material flow, kit releases, and hardware shipments for a fast‑moving development program transitioning to production. Your responsibilities will include, but are not limited to: Create and maintain MRP schedules, work orders, and kit releases to meet dynamic program demands. Coordinate hardware shipments between Orlando and other MFC sites, ensuring timely delivery to customers. Partner with Quality, Engineering, and Program Management to prioritize work on the production floor. Monitor inventory levels, generate move...

Description: You will be the Optics Manufacturing Engineer for the Missiles and Fire Control (MFC) team in Orlando, FL. Our team is responsible for delivering best‑in‑class optical components and systems—using diamond‑turning, precision fabrication, and lean manufacturing—to meet demanding defense missions. What You Will Be Doing As the Optics Manufacturing Engineer, you will support production of single‑point diamond‑turned optics and other high‑precision optical fabrications. You will partner with operators, engineers, and suppliers to drive cost‑effective, high‑yield manufacturing while ensuring quality, reliability, and on‑time delivery. Your responsibilities will include: Providing technical guidance and hands‑on support to optical operators to achieve peak performance. Designing, documenting, and sustaining manufacturing and test plans for non‑recurring effort (NRE) projects, then transitioning those plans into full‑rate production. Applying lean manufacturing...

Description: You will be the Contractor Technical Support (CTS) Representative for the Sniper Typhoon Sustainment Team. Our team partners with the Royal Saudi Air Force (RSAF) to keep the Sniper ATP system and its support equipment operating at peak performance, delivering world class training, troubleshooting, and sustainment expertise from Orlando, FL to Taif, Saudi Arabia. What You Will Be Doing As the CTS Representative you will be responsible for delivering hands on maintenance, diagnostic, and pilot training support that drives RSAF self sufficiency with the Sniper system. You’ll serve as the technical liaison between Lockheed Martin, the manufacturer’s plant, and the end user, ensuring safety, quality, and continuous improvement across the program. Your responsibilities will include: • Perform organizational level maintenance, fault isolation, diagnostics, and repairs per Technical Orders (TOs), Time Compliance TOs (TCTOs), and Country Standard TOs (CSTOs). • Provide...

Description: You will be the Manufacturing Planner for the Production, Planning and Control team. Our team is responsible for production planning for one of our Missiles & Fire Control (MFC) Strike Weapons lines of business. What You Will Be Doing As the Manufacturing Planner you will be responsible for driving schedule driven, cross functional planning that fuels high tempo strike weapon programs. Your responsibilities will include, but are not limited to: Oversee program planning for Strike Weapons, releasing purchase orders and coordinating with Supply Chain Management to secure needed materials. Monitor engineering changes and create or update bills of material to keep data current. Track production schedules across multiple manufacturing centers, ensuring on time delivery of components. Manage buy planning activities, balancing purchased and Lockheed made parts to support uninterrupted production flow. Collaborate with engineering,...

Description: This req is for the JAGM Production Operations Manager. Selected candidate will be responsible for managing all operational aspects of JAGM production and EGT, requires continuous coordination and communication with all make centers building JAGM production. What You Will Be Doing Your responsibilities will include but are not limited to: Leading the execution of production scope of BUY 17 and BUY 18 contracts and supporting future proposals as opportunities arise. Regularly provide production status to both TAGM customer and LM Program Management. Travel to Ocala, Troy, Archbald as needed to support ongoing production. Based out of Orlando and manage IPT leads supporting MDMS Production. Why Join Us The ideal candidate is a collaborative, results‑driven leader who thrives in a fast‑paced environment and enjoys turning complex operational challenges into predictable, high‑quality outcomes. This role offers direct influence on a flagship...

Description: You will be the Manufacturing Engineering Lead (Optics Manufacturing Associate Manager) for the Optical Components Center. Our team is responsible for ultra precision machining, thin film coatings, and the production of complex optical components. What You Will Be Doing As the Manufacturing Engineering Lead you will direct a team of 5 10 engineers, driving best in class manufacturing practices for high performance optics. Your responsibilities will include, but are not limited to: Lead business execution by applying statistical process control, design of experiments, advanced analytics, and root‑cause analysis to continuously improve process yield, cost, and schedule. Manage non‑recurring projects from concept through production, ensuring design‑for‑manufacture and automation requirements are met. Champion technology advancement by steering research, development, and integration of new manufacturing equipment and processes. Develop and...

Description: Lockheed Martin Space has an immediate need for a Systems Integration / Test Engineering Associate Manager for the ARTEMIS Program ORION Production Floor. The Systems Integration / Test Engineering Associate Manager will be responsible for the following: • Supervise, Lead, and Direct the Orion Production Floor ensuring the assembly, and test of all hardware & requirements are met. • Manage Day to Day Activities of the Technician Workforce attending Operations and Scheduling Meetings, Issuing Job Assignments, Scheduling Vacations, Time Off, Overtime and Resource Allocation. • Provide Daily Activity Reports to Stakeholders, highlighting critical activities and major occurrences. • Identify Programmatic Issues, capturing them in a professional concise manner and achieve real time solutions. • Review and approval of Drawings, FFMEAs, Change Task, Test Procedures, Manufacturing Work Instructions and PO Closures. • Responsible for Ensuring that all requirements are met...

Description: You will be the Manufacturing Planner for the Production, Planning and Control organization. The Production Planning & Control (PP&C) organization is a critical component of Lockheed Martin's manufacturing operations, responsible for developing and executing plans to produce high‑quality products on time and within budget. As a key enabler of production success, PP&C teams work closely with cross‑functional stakeholders to optimize production schedules, manage resources, and drive continuous improvement initiatives. What You Will Be Doing As the Manufacturing Planner, you will work in the Production, Planning and Control organization as a Scheduler, Make, Buy or Bill of Materials (BOM) Planner. Coordinates with Procurement and Operations Management to determine appropriate time‑phased plan for procured parts. Utilizing MRP reports, follow actions in the supply chain to ensure material is ordered and delivered to meet production, the...

Description: Job Description Join our team as a Senior Manufacturing Engineer for the Machining Operations Center/Manufacturing Engineering Team. Our team is responsible for creating and improving manufacturing strategies for ultraprecision CNC machined. Our team plays a crucial role in developing and implementing solutions for technical and organizational challenges. What You Will Be Doing As a Senior Manufacturing Engineer your focus will be on driving solutions, your responsibilities will include: Deliver verbal and written status reports, highlighting project milestones and progress. Communicate project risks, solutions, and schedule impacts to stakeholders. Prioritize tasks to ensure the team is progressing in the right direction. Represent the team in programmatic reviews and status meetings. Assist in the development of proposals. Create/update work instructions, mfg. sketches, and other shop floor documentation to support production...

Description: Job Description You will be the Manufacturing Planner for the Production, Planning and Control team. Our team is responsible for production planning for Missiles & Fire Control (MFC) Strike Weapons line of business. What You Will Be Doing As the Manufacturing Planner you will be responsible for driving schedule‑driven, cross‑functional planning that fuels high‑tempo strike‑weapon programs. Your responsibilities will include, but are not limited to: Oversee supply planning for Strike Weapons, ensuring timely release of purchase requests and coordinating with Supply Chain Management to secure needed materials. Monitor engineering changes and align supply with changes to bills of material. Track production schedules across multiple manufacturing centers, ensuring on‑time delivery of components. Manage buy‑planning activities, balancing purchased and Lockheed‑made parts to support uninterrupted production flow. Collaborate with...

Description: You will be the Manufacturing Planner Sr for the Production Planning & Control (PP&C) team. Our team is responsible for driving inventory optimization, material flow, and schedule integrity across Lockheed Martin Missiles and Fire Control (MFC) programs. What You Will Be Doing As the Manufacturing Planner Sr you will be responsible for executing Scheduling and Bill‑of‑Material (BOM) planning activities within the Manufacturing Resource Planning (MRP) system. Your responsibilities will include, but are not limited to: Develop, update, and load Internal Operating Plan schedules in MRP, ensuring accurate BOM structures, lead‑times, and lot‑size parameters. Expedite and optimize material flow by coordinating with Procurement, Operations Management, and Supply‑Chain stakeholders to meet production commitments. Maintain MRP data integrity, adjusting lead times and lot sizes, and collaborating with Engineering Change Board representatives to...

Description: You will be the Manufacturing Engineer for the Machining Operations Center (MOC) within Lockheed Martin Missiles and Fire Control (MFC). Our team is responsible for producing ultra‑precision machined components that enable infrared and electro‑optical targeting systems for critical defense platforms. What You Will Be Doing As the Manufacturing Engineer you will be responsible for delivering high‑quality precision parts while supporting continuous improvement across the Orlando site. Your responsibilities will include, but are not limited to: Collaborate with Manufacturing, Industrial, Quality Engineers and production stakeholders to define machining solutions. Develop, refine, and maintain CAM programs and machining strategies for CNC mills, lathes and other precision equipment. Create and update detailed work instructions, fixtures and tooling drawings that drive consistent shop‑floor execution. Provide on‑site support to resolve...

Description: You will be the Manufacturing Supervisor for the Optical Components Center (OCC). Our team is responsible for ultra‑precision machining, additive manufacturing, and the development and production of complex optical components and sophisticated electronic systems. What You Will Be Doing As the Manufacturing Supervisor you will be at the helm of coordinating multiple processes, ensuring smooth production flow, and meeting key performance goals. Your responsibilities will include, but are not limited to: Prioritizing hardware through various production stages and communicating status updates to leadership. Managing quality, schedule, and cost goals across several work cells. Collaborating with cross‑functional teams to drive process improvements and optimize workflows. Inspiring and motivating team members, setting high standards for performance excellence, and fostering an environment where everyone can thrive. Overseeing the...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK As a Production Control Coordinator, your role will be integral to the Production Operations team within our Rotary & Mission Systems (RMS) division located in Orlando, Florida. You'll immerse yourself in a culture of continuous process enhancement, collaborating to identify and eradicate inefficiencies that occur within our production...

Description: You will be the Operations Analyst Staff for the MFC Enterprise Industrial Engineering team. Our team is responsible for applying advanced analytical skills and Industrial Engineering concepts to support JASSM/LRASM Production Operations Management. What You Will Be Doing As the Operations Analyst Staff, you will be responsible for applying advanced analytical skills along with other Industrial Engineering skills and analyses to help turn an array of raw data into actionable information for use in making sound business decisions. You will help the Build Teams focus on ways to increase their efficiencies and quality, with a focus on program affordability. Your responsibilities will include but are not limited to: Applying analytics tools (Tableau, Excel, Python, R, etc.) to analyze data and provide insights Developing and maintaining discrete event simulation models to support production operations Collaborating with cross-functional teams to...

Description: You will be the Operations Manager for the Advanced Threat Warning System (ATWS) Program at Missiles and Fire Control (MFC) in Orlando, FL. At Lockheed Martin Missiles and Fire Control (MFC), we are driven by speed, agility and technical innovation. We are actively seeking candidates who are willing to take on the challenges of significant growth with a can do attitude. As the world's premier aerospace and defense company, we pride ourselves on quality and mission success. We need talented, passionate and customer centric people to be part of our future. What You Will Be Doing As the Prj Mgt & Png Ops Manager, your responsibilities will include but are not limited to: • Lead a team of employees who interface manufacturing to provide daily support across multiple sites and contracts/programs • Interface with all functions to solution issues that impact production and meet IOP, contract and financial commits. • Act as deputy to Prod Ops Senior Manager....

Description: You will be the Sniper/ATP Production Operations Senior Manager for the Missiles and Fire Control team. Our team is responsible for leading operations execution of complex Sniper/ATP programs. What You Will Be Doing As the Sniper/ATP Production Operations Senior Manager you will be responsible for ensuring successful planning, execution, and delivery of complex defense products. Your responsibilities will include, but are not limited to: Operations Leadership – develop and implement execution strategies aligned with program requirements and company goals. Production Operations Management – oversee scope, schedule, budget, risk, and monitor progress, driving corrective actions as needed. Stakeholder Management – build and maintain strong relationships with internal and external partners, acting as the primary point of contact. Team Leadership – mentor direct reports, foster a collaborative high‑performance culture, and support all...

Description: You will be a Engineering Aide at Lockheed Martin, turning engineering drawings into high quality electronic and electro mechanical assemblies. Our team supports both Engineering and Manufacturing Production, ensuring reliable hardware for critical defense programs. What You Will Be Doing As a Engineering Aide you will be responsible for building circuit cards, and wiring harnesses, then integrating them into single or multi bay cabinet units. You will work independently while collaborating closely with Engineers, Draftsmen, Procurement, and Quality Inspectors to keep projects on schedule and on spec. Your responsibilities will include: • Placing and soldering components on circuit cards and sub assemblies according to blueprints, schematics, and engineering guides. • Fabricating wiring harnesses, including connector pinning, de pinning, and installation of mounting hardware. • Assembling lower level builds into complete cabinet assemblies for delivery to...

Description: You will be the Production Development Lead for the Production Development team. Our team is responsible for production planning, demand planning, master data management, and delivering clear operational metrics that drive mission critical success. What You Will Be Doing As the Production Development Lead you will be responsible for guiding emerging technology production efforts from development through full scale manufacturing. Your responsibilities will include, but are not limited to: Participate in development and execution of integrated master schedules that align engineering, finance, manufacturing, and global supply chain commitments. Define best practices on how to manage MRP for different phases of development. Create and monitor key performance indicators and report actionable insights to senior leadership. Coordinate cross functional teams to resolve schedule bottlenecks, material constraints, and change management impacts....

Description: You will be the Machining Supervisor for the Engineering Prototype Laboratory (EPL) Manufacturing Floor team. Our team is responsible for the safe and efficient execution of developmental machining and fabrication activities that support cutting‑edge missile and sensor programs. What You Will Be Doing As the Machining Supervisor you will be responsible for leading a crew of machining and fabrication technicians, ensuring projects stay on schedule, and maintaining strict compliance with AS9100 quality standards. Your responsibilities will include, but are not limited to: Plan, coordinate, and track machining & fabrication projects, guaranteeing that tasks meet scope, schedule, and cost targets. Provide technical guidance, on‑site to the shop‑floor team. Drive continuous‑improvement initiatives and coach technicians to raise skill levels and performance. Maintain audit readiness, oversee equipment and calibrated tooling custody, and...