64 field engineer jobs found

Description SAIC is seeking Field Service Engineers (FSE) to support the Medusa Sustainment project in Kuwait, which is a U.S. Air Force solution for defense against small unmanned aerial systems (s-UAS). The Medusa System of Systems is the U.S. Air Force's solution for defense against small unmanned aerial systems (s-UAS) utilizing a government-owned Medusa Command and Control (Medusa C2), which allows for a plug-and-play selection of Passive and Active Sensors, Electronic and Kinetic Weapon Systems, as well as the insertion of a variety of Fusion, Association, Threat and Combat ID Algorithms. The Medusa C2 supports fixed base, portable, mounted and handheld operations. The Medusa Team supports the United States Air Force C-sUAS programs worldwide. Job Responsibilities: Provide field engineering and technical support services to maintain and sustain fielded C-sUAS systems, equipment, and software at designated locations. Install, operate, maintain, and...

Description SAIC is seeking Field Service Engineers (FSE) to support the Medusa Sustainment project, at Andrews Air Force Base, which is a U.S. Air Force solution for defense against small unmanned aerial systems (s-UAS). The Medusa System of Systems is the U.S. Air Force's solution for defense against small unmanned aerial systems (s-UAS) utilizing a government-owned Medusa Command and Control (Medusa C2), which allows for a plug-and-play selection of Passive and Active Sensors, Electronic and Kinetic Weapon Systems, as well as the insertion of a variety of Fusion, Association, Threat and Combat ID Algorithms. The Medusa C2 supports fixed base, portable, mounted and handheld operations. The Medusa Team supports the United States Air Force C-sUAS programs worldwide. Job Responsibilities: Provide field engineering and technical support services to maintain and sustain fielded C-sUAS systems, equipment, and software at designated locations. Install, operate,...

Description: You will be the Field Service Representative (FSR) for the HIMARS Program Team at Fort Drum, NY. Our team delivers world class support for the U.S. Marine Corps HIMARS/MLRS weapons system—designing, diagnosing, and repairing its electrical, hydraulic, and mechanical subsystems to keep the warfighter mission ready. What You Will Be Doing As the FSR you will be the frontline technical liaison between Lockheed Martin and the Marine Corps. You’ll travel to OCONUS and war zone sites, troubleshoot system faults, perform repairs, and ensure flawless system performance while upholding the highest standards of professionalism and customer service. Your responsibilities will include: • Diagnose, isolate, and repair electrical, hydraulic, and mechanical issues on HIMARS/MLRS platforms. • Conduct on site testing, calibration, and functional verification of all system components. • Provide technical briefings and status updates to the customer and internal stakeholders. •...

Description: You will be the Field Service Representative (FSR) for the U.S. Marine Corps HIMARS/MLRS Team at our Fort Bragg, NC hub. Our team delivers world class sustainment, fault isolation, and rapid repair for the HIMARS and MLRS weapon systems, ensuring decisive fire support for warfighters everywhere. What You Will Be Doing As the FSR you will be the frontline technical expert who keeps HIMARS platforms mission ready. You’ll diagnose, troubleshoot, and repair electrical, hydraulic, and mechanical subsystems while collaborating closely with the customer to uphold Lockheed Martin’s reputation for excellence. This role requires flexibility to deploy to OCONUS sites and, when needed, to combat zones. Your responsibilities will include: • Perform detailed fault isolation, diagnostics, and corrective actions on HIMARS/MLRS hardware. • Execute maintenance, repair, and overhaul of electrical, hydraulic, and mechanical components. • Serve as the primary Lockheed Martin...

Description: Join the Lockheed Martin Aeronautics team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE) for the United Arab Emirates (UAE) Air Force at Al Dhafrah Air Base (AB), UAE. This position will serve as the F-16 Avionics ATE Field Service Engineer (FSE) by providing on-site repair, advice, liaison, and training in the installation, operation and maintenance of equipment and systems related to F-16 avionics What You Will Be Doing * Provide on-site/on-equipment repair and informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting, bench check, routine maintenance, inspection and repair of the prime equipment/system. * Devise local informal training programs and provide advice in identifying needed training programs. * Render technical advice to resolve difficult and unusual maintenance problems. * Provide liaison through which...

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an F-16 Aircraft General (APG) Field Service Engineer (FSE) to support the Taiwan Air Force. Note: This position is located in Chihhang Air Base, Taitung, Taiwan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to Block 70 F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration, trouble-shooting,...

Description: Join the Lockheed Martin Aeronautics company as an Aircraft Field Service Engineer (FSE) on our Aeronautics Field Sustainment (AFS) team! This position will support the F-35 Program at our MCAS Iwakuni, Japan location. As a Nose to Tail (NTT) FSE, the preferred candidate will be a Subject Matter Expert (SME) in Avionics/Mission Systems (MS). It is desired the individual also be an emerging authority in APG/Vehicle Systems (VS) and Supportable Low Observable (SLO)/Structures, with the skill set to accomplish troubleshooting and analysis of MS, VS, and/or SLO. The candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment (AFS) technical interface to the USMC/USN on-site Customer (both Operations and Maintenance) in resolving issues arising from maintenance and modification activities for all matters dealing with the F-35 aircraft. What You Will Be Doing Responsibilities include: • Accomplish troubleshooting and analysis of difficulties...

Description: Join our team as a Field Support Engineer (FSE) Field Training SME for the Lockheed Martin Aeronautics F-35 FSE Core team. The successful candidate will provide continuous Nose-to-Tail FSE training and FSE Subject Matter expertise to Aeronautics Field Sustainment FSEs. What You Will Be Doing The FSE Field Trainer will be responsible for onsite field training material development/documentation, sustainment/upkeep, and facilitate training events to ensure Lockheed Martin FSEs are proficient in resolving issues arising from maintenance or modification activities for all matters dealing with the F-35 aircraft. The preferred candidate should have an accomplished background as an F-35 Field Support Engineer with troubleshooting and analysis of aircraft Vehicle Systems/Mission Systems problems. The FSE Field trainer will need to stay apprised of field issues and adjust onsite FSE training tactics accordingly. Must be able to work independently to determine and...

Description: Role Overview We are seeking a Senior Numerical Control (NC) Programmer who thrives in a high-tech, high-accuracy manufacturing environment. In this role, you will translate engineering drawings into robust, efficient CNC programs for multi-axis machining centers. You’ll collaborate closely with engineers, machinists, and production teams to optimize processes, enhance manufacturability, and deliver precision components on schedule. If you are passionate about CNC programming, continuous improvement, and tackling complex machining challenges, this is an opportunity to grow your influence and lead innovation. Key Duties & Responsibilities • Develop and write CNC programs for 3-, 4-, and 5-axis machines based on engineering drawings and specifications. • Analyze engineering documents to define part configurations and determine machining sequences. • Select cutting tools, speeds, feeds, and strategies aligned with machine tool capabilities and material...

Basic Qualifications Bachelor's degree in Manufacturing or Industrial Engineering, a related specialized area or field is required.   CLEARANCE REQUIREMENTS:  Department of Defense secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position General Dynamics Mission Systems has an opening for a Manufacturing Leadership Program (MLP) Engineer - Class of 2026 to join our team in Scottsdale, Arizona. The position provides an opportunity to develop and advance the cutting-edge technology that supports some of our nation's fundamental defense services. General Dynamics Mission Systems employees work closely with esteemed clients to develop solutions that allow...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Candidates must be able to obtain a Secret clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation’s heroes keep our nation safe. The work we do is so advanced,...

Basic Qualifications Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you’ll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position The Manufacturing Software Engineer is responsible for developing, and maintaining automated manufacturing methods, processes, and operations for new and existing products. This role involves working closely with design engineering, managing manufacturing process capital, and...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Help make the technologies, products and services that make a difference. That’s the opportunity that’s waiting for you at General Dynamics Mission Systems. We help our nation’s heroes keep our nation safe by creating solutions so advanced, they...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation’s heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what’s possible. Here you’ll work with the best and your...

Basic Qualifications Requires a Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable amount of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As an Advanced Mechanical Manufacturing Engineer at Pittsfield, Massachusetts, you’ll be a member of a highly motivated cross functional team responsible for overcoming daily production challenges and continuously delivering on commitments.  You are encouraged to apply if you have...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 8+ years of job-related experience, or a Master's degree plus 6 years of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As a Senior Advanced Manufacturing Engineer at Pittsfield, Massachusetts, you’ll be a member of a highly motivated cross functional team responsible for overcoming daily production challenges and continuously delivering on commitments....

Description: You will be the Manufacturing Engineer Sr for the Manufacturing Engineering team. Our team is responsible for advancing production capabilities for the F‑35 and Sniper programs. What You Will Be Doing As the Manufacturing Engineer Sr you will be responsible for supporting SITC manufacturing engineers and driving process improvements across the Orlando production site. Your responsibilities will include, but are not limited to: Develop and refine manufacturing processes for F‑35 and Sniper program production. Troubleshoot yield issues and conduct investigations to improve overall production efficiency. Design and evaluate tooling concepts to support high‑mix, low‑volume manufacturing. Support production‑operations meetings, prepare presentations, and coordinate cross‑functional events. Represent engineering on make‑buy decisions, IMS support, and engineering‑change‑board activities. Why Join Us The ideal candidate is a collaborative problem‑solver with...

Description: You will be a Manufacturing Planner for the Production Planning and Control organization. Our team is responsible for driving program planning and manufacturing operations to meet business objectives. What You Will Be Doing As a Manufacturing Planner, you will be responsible for overseeing program planning and manufacturing planning activities, ensuring effective management of production schedules, material procurement, and workflow prioritization. Your responsibilities will include: • Monitoring and managing production schedules, material procurement, and workflow prioritization • Coordinating with cross-functional teams, including engineering, manufacturing, and supply chain management • Ensuring data integrity in the MRP system and effective management of kit issues and hardware needs • Implementing and managing engineering and process changes in a fast-paced manufacturing environment • Providing status reports and analyzing production data to inform business...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK The candidate selected for this role will support the manufacturing engineering organization by acting as a lead manufacturing engineer supporting new development work in the Microelectronics Center (MEC) and additional areas as required. Responsibilities within this role include, but are not limited to, the following tasks: • Lead Operations team development for IR&D, Functional Project, and Engineering builds • Manage manufacturing engineering projects through coordinating tasks, timelines and schedules across functions • Review and...