13 technical training instructor jobs found

Description SAIC is seeking Field Service Representatives (FSR) to support the U.S. Army's Maneuver Short-Range Air Defense (M-SHORAD) program. The FSR will provide onsite technical expertise, training, and coordination for fielding, operation, troubleshooting, and sustainment of the M-SHORAD system across CONUS and potentially OCONUS locations. The ideal candidate will bring extensive air defense and/or counter-UAS experience and a strong background in soldier / operator training, system employment, and field support. Prior military experience and 9+ years of experience preferred. This position requires frequent interaction with Army units and other DoD stakeholders, providing hands-on support for system fielding, new equipment training, and sustainment. Responsibilities: Technical and On-site Support and Maintenance System set-up, configuration, and operational checks. Troubleshooting, fault isolation, and coordination of repairs. Assist with diagnosing hardware,...

Description: You will be a Technical Trainer, delivering hands on, instructor led training to manufacturing personnel supporting the Archbald, PA facility. Our team specializes in designing, manufacturing, and engineering electronic assemblies, machined and welded assemblies/parts, and safety-critical systems for various defense and commercial applications. What You Will Be Doing As a Technical Trainer, your responsibilities will include: - Develop, update, and deliver lesson plans, training manuals, and hands‑on demonstration modules for electrical, mechanical, and micro‑electronics assembly processes. - Conduct classroom and shop‑floor training sessions, ensuring clarity, engagement, and adherence to safety standards. - Administer assessments, track learner performance, and generate progress reports for leadership. - Identify skill gaps and collaborate with subject‑matter experts to mitigate deficiencies. - Prepare and maintain training equipment,...

Basic Qualifications Bachelor's degree or equivalent combination of education and relevant work experience is required plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they’re often classified. That’s what you’ll find at General Dynamics Mission Systems. Here you’ll lead amazing engineers as they invent the technologies,...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Standard Job Description As an Integration & Assembly Manufacturing Engineer, you will be primarily responsible for planning, preparing for, and executing air‑vehicle builds, as well as related testing and ground-support operations Key Responsibilities: Develop, implement, and refine hardware integration, assembly, manufacturing processes and build sequences. Collaborate with design engineering teams and other disciplines to provide feedback on designs and specifications, ensuring manufacturability and optimal use of available equipment and methods. Identify and resolve issues related to hardware, tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Respond to production issues and facilitate removal of build constraints with extreme ownership. Operate within a model-based engineering...

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: As an Integration & Assembly Manufacturing Engineer, you will be primarily responsible for planning, preparing for, and executing air‑vehicle builds, as well as related testing and ground-support operations Key Responsibilities: Develop, implement, and refine hardware integration, assembly, manufacturing processes and build sequences. Collaborate with design engineering teams and other disciplines to provide feedback on designs and specifications, ensuring manufacturability and optimal use of available equipment and methods. Identify and resolve issues related to hardware, tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Respond to production issues and facilitate removal of build constraints with extreme ownership. Operate within a model-based engineering environment...

Description: OCCUPATIONAL SUMMARY This classification requires the performance of varied work assignments to acquire the knowledge, skill and ability necessary to perform the duties of a Missile Material Handler Senior. WORK PERFORMED Under the technical direction of higher-level personnel, utilize various documents and computer systems in the performance of duties. Assist higher-level personnel perform duties in support of the Consolidated Hazardous Material Reutilization and Inventory Management Program (CHRIMP), which provides life-cycle management of hazardous and shelf-life material. Assist in the ordering, receiving, repackaging, labeling, inventory, and monitoring of the shelf life of hazardous materials. Under the technical direction of higher-level personnel, track container returns, dispense hazardous material from larger containers into smaller unit sizes, process expired material and dispose of hazardous waste. Through formal classroom training and through on-the-job...

Description: You will be the Final Assembly and Checkout Manufacturing Support Team Member Sr - (Prod Ops Specialist) - Level 3 for the F‑16 Block 70 Manufacturing Support team which is responsible for supporting production processes in a team‑based manufacturing environment. What You Will Be Doing As the (FACO) Manufacturing Support Team Member Sr - (Prod Ops Specialist) - Level 3 you will be responsible for providing on‑the‑job training, quality oversight, and continuous‑improvement support for F‑16 Block 70 assembly operations. Your responsibilities will include: Deliver on‑the‑job training, assessment, and certification for airframe, power‑plant, and electrical/avionics assembly technicians. Monitor the assembly line daily to identify and correct deficient processes, procedures, or skill gaps. Support corrective‑action investigations, root‑cause analyses, and implement process‑improvement and 6S/lean initiatives. Coordinate with supervisors and...

Description: *This position is contingent upon program award to Lockheed Martin. Any job offers extended to selected candidates will include a contingency clause stating that the offer is dependent on Lockheed Martin securing the program award. WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK In this important role, some of your responsibilities will include: • Fabricates or assembles production microelectronics components, modules or equipment such as printed circuit boards, hybrid circuits and integrated semiconductor devices by setting up and using a variety of machines, tools, semi-automated equipment...

Description: *This position is contingent upon program award to Lockheed Martin. Any job offers extended to selected candidates will include a contingency clause stating that the offer is dependent on Lockheed Martin securing the program award. WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK In this important role, some of your responsibilities will include: • Fabricates or assembles production microelectronics components, modules or equipment such as printed circuit boards, hybrid circuits and integrated semiconductor devices by setting up and using a variety of machines, tools, semi-automated equipment...

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...