27 building equipment mechanic jobs found

Description: This classification requires the performance of varied work assignments associated with post DD250 final assembly and subassembly of missiles as well as tasks associated with processing their designated reentry bodies. Perform various maintenance, handling, receipt/shipment, and storage tasks associated with Trident II missiles. Conduct mate/demate operations in the vertical missile processing building and the service unit. Ensure strict procedural compliance is adhered to. Become certified and act as an Ordnance Mechanic in the Vertical Missile Packaging Building and during Service Unit/Missile Service Unit Operations. Position involves daily interface with various customer organizations including Navy, Marine Corps, contractors, and civil service personnel. Good communication skills, both orally and written are necessary. Occasional shift work will be required. Work with technical assistance and guidance. Work with progressively less guidance and instruction as...

Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. This occupation requires the installation, maintenance, repair, overhaul and modification of plant air conditioning, ventilation, and refrigeration systems, and equipment, including low temperature cascade systems, Building Automation Systems (BAS) and steam boiler, gas-fired heating equipment (excludes installation of ducts and utility feed lines). Operate centrifugal chillers, cooling towers, hot water and steam boilers and air handling systems per manufacturers’ recommendations and management directives. Determine, by making periodic inspections, the repair and maintenance work necessary to prevent functional breakdowns requiring major overhaul of air conditioning, ventilation and refrigeration systems and equipment, including low...

Description: You will be the Aircraft Mechanic I for our team. Our team is responsible for ensuring the airworthiness and optimal functionality of aircraft through scheduled and unscheduled maintenance, troubleshooting, and repairs of all mechanical systems and components. What You Will Be Doing As the Aircraft Mechanic I, you will be responsible for performing a variety of tasks to ensure the airworthiness and optimal functionality of aircraft, including troubleshooting and repair, component repair and replacement, inspections and tests, and technical documentation. Your responsibilities will include: Troubleshooting and repairing issues in aircraft systems, including landing gear, flight controls and surfaces, anti-icing systems, pneudraulic systems, engines, auxiliary power units, and ventilation and heating systems. Repairing, replacing, or rebuilding aircraft components such as drive systems, control systems, engines, and engine parts to maintain...

Basic Qualifications Bachelor’s degree in a related specialized area or equivalent experience is required plus a minimum of 2 years of relevant experience; or Master's degree. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required within a reasonable period of time. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation’s heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what’s possible. Here you’ll work with the best and your talent will be front and center on projects that impact the world. Are you up to the...

Responsibilities: Do you have vocational/technical training in Technical Trades, Electronics, Computers, Drafting, Engineering, or Networking? Do you enjoy building, installing, modifying, repairing, fabricating prototyping parts/mechanisms, and/or testing electronic equipment? The National Security Agency (NSA) is seeking highly motivated Engineering Specialists/Technicians - Technical Trades to help build, install, modify, repair, fabricate prototype parts/mechanisms, and/or test electronic equipment. The responsibilities of an Engineering Specialist/Technician may include: - Installing, operating, maintaining, troubleshooting and/or repairing of equipment and systems in accordance with applicable standards and processes - Performing rack, stack, and cabling of equipment in IT machine rooms - Maintaining Configuration Items (CI) in a centralized data base - Capturing and tracking IT machine room Power, Space, and Cooling - Serving as an Access Manager for IT machine rooms -...

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an F-16 Field Service Engineer (FSE) to support the Argentina Air Force (FAA) at Rio Cuarto Air Base, Cordoba Province, Argentina. Note: This position is located in Argentina and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration,...

Description: WHAT WE’RE DOING At Rotary and Mission Systems (RMS) we provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK - As a test technician in the sub assembly area, you will perform a variety of product validation/testing related activities on electronic, mechanical, or electromechanical assemblies. - You will be required to work from diagrams and drawings, use multimeters, complex test equipment, and common hand and/or power tools. - You will need to make continuity checks...

Description: As a Manufacturing Materials and Process Engineer within IGNITE, you will work in the Severn Operations Manufacturing Team providing support to internal and external customers. We're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. Key Responsibilities: • Works closely with Engineering and Manufacturing to develop solutions for product ruggedization, typically for board assemblies using polymerics. • Works closely with Engineering and Manufacturing to execute Design for Manufacturability Reviews (DFM) • Will review Engineering documentation and generate process flow charts, manufacturing travelers, and work instructions. Works closely with Engineering to update documentation....

Description SAIC is currently seeking a Quality Technician in Middletown, RI to assess our electrical mechanical test systems to ensure product conformance. In this role, you will conduct routine quality inspections throughout production, including receiving, in-process, and final inspections. During these inspections you will assess product compliance by utilizing product electrical and mechanical drawings, test meters, and precision measuring tools to ensure that products meet specifications. You will also manage equipment calibrations and perform workstation audits. In addition, maintain records, tracking metrics, and develop quality reports. Applicants should have experience performing required task in similar product environment. Job Duties: Conducts routine quality inspections throughout the production or manufacturing process, including receiving, in-process, and final inspections. Manages equipment calibration process. Performs in process audits. Maintains...

Description: Job Description : This classification requires performance of pre-DD250 tasks associated with the assembly, disassembly, modification, repair, assembly checkout and movement of all types and configurations of new and fleet return missiles and associated missile components. Perform inspection and related functions involved in quality assurance and acceptance of Fleet Ballistic Missile systems, materials and surface support equipment. Knowledge of computer skills to perform work. Work with technical assistance and guidance, or work independently with complete procedures or written instruction after initial on-the-job instruction and guidance. Work with progressively less guidance and instruction as knowledge, skill, and experience in classification increases. Assist in and/or perform the assembly and disassembly operations involving such functions as connecting and mating of the motor, equipment section, and interstage sections; removal and installation of...

Description: Test Engineering department designs and fabricates equipment that will be used in the development and manufacture of tactical hardware. We are seeking early career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes. Specific Job Description: Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies. The fabrication of wiring harnesses will require connector pinning, de-pinning, and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas. This position will provide the opportunity for the candidate...

Description: You will be the Senior Tool Engineer / Tool Design / GD&T for the Pike County Operations (PCO) team. Our team is responsible for creating innovative solutions to manufacture missile components and final assemblies, ensuring compliance with government regulations and company standards. What You Will Be Doing As the Senior Tool Engineer / Tool Design / GD&T you will be responsible for designing, fabricating, and implementing special tools and fixtures that enable missile assembly and test operations. Your responsibilities will include, but are not limited to: Collaborate with missile designers, production operations, and stakeholders to conceptualize and design special tools and fixtures Create detailed tool design CAD models and drawings using PTC Creo and CATIA V5 Provide shop floor support to resolve tooling, technical, and manufacturing related issues Ensure compliance with government regulations, company command media,...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK The selected candidate will be responsible for: • Analyzing and interpreting electrical, electromechanical, and cable schematics during development and production stages. • Updating and creating assembly work instructions for efficient assembly based on the drawings and/or models • Publishing work instructions to the production floor for use •...

Description: You will be the Production Operations Manager (Level 5) for the Advanced Programs Production Operations team. Our team is responsible for delivering affordable, scalable manufacturing solutions that enable rapid fielding of advanced air‑ and missile‑defense systems. What You Will Be Doing As the Production Operations Manager (Level 5) you will be responsible for leading all Production Operations activities and shaping the strategy that drives rapid fielding of critical defense hardware. Your responsibilities will include, but are not limited to: Develop and deploy Production Operations strategies for design and development of production systems. Direct cost, schedule, and quality performance for prototyping and development hardware builds. Lead identification and adoption of advanced manufacturing capabilities and strategic supply‑chain partnerships. Oversee capital, capacity, and facility‑project planning to support rapid fielding....

Description: You will be the Electro Mechanical Assembler for the Manufacturing Assembly Team. Our team is responsible for delivering high‑quality electro‑mechanical products that meet stringent performance and safety standards. What You Will Be Doing As the Electro Mechanical Assembler you will be responsible for building precision electro‑mechanical assemblies, wiring sub‑assemblies, and ensuring every component meets exacting specifications. Your responsibilities will include, but are not limited to: Work in a team or solo environment to assemble components and main assemblies Supports the manufacture of harnesses, circuit cards and miscellaneous assemblies Diligently follow work instructions to ensure product specs, performance targets and quality levels are met Form Components and hand or machine populate circuit cards Assembler would operate various equipment such as but not limited to Laser wire strippers, crimpers, pneumatic tools etc....

Description: Determines routing of wires and conduits and determines location and method of installing such electrical units as switches, outlets, junction boxes, rectifiers, transformers and generators on electrical parts of all building facilities branch circuits feeding machine tools and other fixed equipment. Installations shall guided by trade practice, blueprints, wiring diagrams and state, municipal and underwriters' specifications, codes and ordinances. Determines advisability or need for repair or replacement with a new unit, best and safest method of restoring interrupted service and necessity and type of scaffolding to use. Computes wire gauge, power and load limit requirements when this information is not furnished using charts and handbooks considering such factors as amperage, load and distance to power supply. Installs, tests, troubleshoots, and maintains such equipment as large three phase motors, transformer banks, welding generators, panels having...

Description: Determines routing of wires and conduits and determines location and method of installing such electrical units as switches, outlets, junction boxes, rectifiers, transformers and generators on electrical parts of all building facilities branch circuits feeding machine tools and other fixed equipment. Installations shall guided by trade practice, blueprints, wiring diagrams and state, municipal and underwriters' specifications, codes and ordinances. Determines advisability or need for repair or replacement with a new unit, best and safest method of restoring interrupted service and necessity and type of scaffolding to use. Computes wire gauge, power and load limit requirements when this information is not furnished using charts and handbooks considering such factors as amperage, load and distance to power supply. Installs, tests, troubleshoots, and maintains such equipment as large three phase motors, transformer banks, welding generators, panels having...

Description: You will be a Senior Manufacturing Engineer on Third Shift for our PAC-3 program. Our team is responsible for designing and improving manufacturing processes to make production more reliable, efficient, and cost-effective, and providing engineering support to the production floor. What You Will Be Doing Your responsibilities will include, but are not limited to: • Development of tooling and equipment designs from engineering hardware specifications and culminating in complete technical data packages fully defining the tooling / equipment and allowing fabrication of detailed components and assembly of the end item. • Design / documentation efforts to be accomplished IAW company standards utilizing Creo / Solid Works. • Provide engineering support to the production floor for issues that may surface in normal day to day integration processes by analyzing and using problem solving skills in a team environment in accordance with production rate requirements. •...

Description: You will be the Manufacturing Engineer Sr (Level 3) for the Manufacturing Engineering team. Our team is responsible for improving the producibility of early designs and creating manufacturing plans and processes that support the evolving demands of the Warfighter. What You Will Be Doing As the Manufacturing Engineer Sr (Level 3) you will be responsible for developing and executing manufacturing processes that enable efficient, high‑quality production while partnering closely with cross‑functional stakeholders. Your responsibilities will include, but are not limited to: Develop and implement robust manufacturing processes and procedures. Collaborate with cross‑functional teams to identify and resolve production issues. Drive continuous improvements to manufacturing workflows. Ensure compliance with all quality and safety standards. Provide technical support and manufacturing feedback on new product designs. Why Join Us The...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK • Work in close collaboration and provide guidance as a Subject Matter Expert to early career engineers solving manufacturing challenges and implementing process improvements. • Ensure Manufacturing Engineering (ME) team follows consistent ME practices and templates as established, trains team in their use, and ensure consistent and efficient...