47 device engineer jobs found

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Isa Air Base, Bahrain. Note: This position is located in Bahrain and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating...

Standard Job Description Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an In-Country F-16 Avionics Intermediate Shop (AIS) Field Service Engineer (FSE)/ Contractor Engineering and Technical Services (CETS). This position is located in Muafaq Salti Air Base, Jordan. Note: This position is located in Jordan and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and...

Description SAIC is seeking an experienced Model Based Systems Engineer (MBSE) to join our Technical Engineering and Design Department in support of our United States Air Force customer. This position is on-site in San Diego, CA. Responsibilities: Apply systems engineering principles and best practices across the full lifecycle of a technical program, from concept to disposal. Develop, manage, and maintain system architecture models using Model-Based Systems Engineering (MBSE) tools and methodologies (e.g., SysML, UPDM, DoDAF). Lead the definition, decomposition, and management of system requirements, ensuring traceability and alignment with program objectives and stakeholder needs. Conduct trade studies, analyses of alternatives, and risk assessments to inform key technical decisions and mitigate program risks. Define and manage system interfaces, ensuring interoperability and integration between system components. Collaborate closely with cross-functional...

Description SAIC is seeking Senior Manufacturing Engineer in Middletown, RI to oversee the fabrication of Electro-Mechanical Systems is responsible for managing and optimizing manufacturing processes to ensure the delivery of high-quality, cost-effective, and reliable products. This role requires close collaboration with design engineers to ensure manufacturability, development of efficient production workflows, and management of materials, tools, and equipment. They drive continuous improvement initiatives, focusing on efficiency, cost reduction, and scalability, while maintaining safety standards and aligning project timelines. Effective communication, technical expertise, and leadership are critical to successfully bridging design, production, and quality objectives in this role. Key Responsibilities Develop, implement, and optimize manufacturing processes to ensure high-quality, repeatable, and cost-effective fabrication of the electro-mechanical system. Develop and...

Description SAIC is seeking a highly capable Modeling, Simulation & Analysis (MS&A) / Digital Engineering Specialist to support our work at Naval Surface Warfare Center (NSWC) Crane, Indiana in direct support of the NSWC Crane Multi-Service Advanced Capabilities Hypersonics (MACH)-CORE program . In this role, you will lead the integration, translation, and analysis of advanced digital weapons system models into high-fidelity mission simulation environments. This position directly supports the ingestion of digital engineering artifacts from the MACH-XL program - often delivered in highly complex or unfamiliar data formats - and ensures accurate, efficient translation into the Advanced Framework for Simulation, Integration, and Modeling (AFSIM) . This is a high-impact, on-site role that places you at the intersection of digital engineering, modeling & simulation, and cutting-edge hypersonic weapons development - contributing directly to programs that define...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Description SAIC is seeking a Flyout Field Service Engineer (FSE) to support the Medusa Sustainment Team, the U.S. Air Force's solution for defense against small unmanned aerial systems (s UAS). Medusa is a government owned Command and Control (Medusa C2) System of Systems integrating sensors, electronic/kinetic effectors, and advanced algorithms to provide tailorable C sUAS capability for fixed base, portable, mounted, and handheld operations worldwide. This role is focused on Tier 2/3 and flyout support to Medusa C2 sites. The FSE will provide on site technical assistance, corrective maintenance, system integration, and training to operational units, and will work on site in Huntsville, AL when not deployed. Key Responsibilities When not traveling, the FSE will work on-site in Huntsville, AL, with responsibilities including, but not limited to: Provide field engineering and technical support to maintain and sustain fielded C sUAS systems, equipment, and software at...

Description SAIC is seeking a Flyout Field Service Engineer (FSE) to support the Medusa Sustainment Team, the U.S. Air Force's solution for defense against small unmanned aerial systems (s UAS). Medusa is a government owned Command and Control (Medusa C2) System of Systems integrating sensors, electronic/kinetic effectors, and advanced algorithms to provide tailorable C sUAS capability for fixed base, portable, mounted, and handheld operations worldwide. This role is focused on Tier 2/3 and flyout support to Medusa C2 sites. The FSE will provide on-site technical assistance, corrective maintenance, system integration, and training to operational units, and will work on site in Huntsville, AL when not deployed. Key Responsibilities: When not traveling, the FSE will work on-site, with responsibilities including, but not limited to: Provide field engineering and technical support to maintain and sustain fielded C sUAS systems, equipment, and software at designated...

Description SAIC is seeking a Flyout Field Service Engineer (FSE) to support the Medusa Sustainment Team, the U.S. Air Force's solution for defense against small unmanned aerial systems (s UAS). Medusa is a government owned Command and Control (Medusa C2) System of Systems integrating sensors, electronic/kinetic effectors, and advanced algorithms to provide tailorable C sUAS capability for fixed base, portable, mounted, and handheld operations worldwide. This role is focused on Tier 2/3 and flyout support to Medusa C2 sites. The FSE will provide on-site technical assistance, corrective maintenance, system integration, and training to operational units, and will work on site in Huntsville, AL when not deployed. Key Responsibilities: When not traveling, the FSE will work on-site, with responsibilities including, but not limited to: Provide field engineering and technical support to maintain and sustain fielded C sUAS systems, equipment, and software at designated...

Description SAIC is seeking a Flyout Field Service Engineer (FSE) to support the Medusa Sustainment Team, the U.S. Air Force's solution for defense against small unmanned aerial systems (s UAS). Medusa is a government owned Command and Control (Medusa C2) System of Systems integrating sensors, electronic/kinetic effectors, and advanced algorithms to provide tailorable C sUAS capability for fixed base, portable, mounted, and handheld operations worldwide. This role is focused on Tier 2/3 and flyout support to Medusa C2 sites. The FSE will provide on-site technical assistance, corrective maintenance, system integration, and training to operational units, and will work on site in Huntsville, AL when not deployed. Key Responsibilities: When not traveling, the FSE will work on-site in Huntsville, AL, with responsibilities including, but not limited to: Provide field engineering and technical support to maintain and sustain fielded C sUAS systems, equipment, and software at...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description The mission matters. So do the people behind it. With advancing defense technology at our core, what sets us apart is a culture of collaboration, purpose, and impact. What is the mission? Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more— we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision.    What does this role look like? ➥ We are the voice steering today’s design decisions to drive tomorrow’s production success. ➥ This Manufacturing Engineering position will support Space Vehicle design...

Long Description You will be the Program Manufacturing Engineer supporting Affortability/IRAD and MAC efforts as part of Air Dominance Operations team. Our team is responsible for creating and improving manufacturing strategies for complex missile assemblies, and we play a crucial role in developing and implementing solutions for technical and organizational challenges. What You Will Be Doing As the Manufacturing Engineer you will be responsible for driving improvement initiatives that support Air Dominance Production Operations. You will be tasked with improving the overall process of the build using complex, cutting edge technologies and automation. Supporting and participating in the strategy and execution of cost reduction initiatives across LM Sites and supply base. Support design, fabrication, assembly, validation, and deployment of manufacturing tools and electromechanical systems that includes automated components such as robots, conveyors, vision systems and...

About the role The Operations Engineering team provides engineering resources to support Operational performance and major product development projects; from design through to engineering build and production support, to end of life of product. The team provides full product lifecycle support including prototype design & build, development and integration of the build documentation and supporting requirements of full production build. This role will focus on involvement through the full product lifecycle, with the aim to reduce manufacturing costs and improve yield at all stages, which will directly impact our customers, whilst supporting the Programme in delivery of the milestones. As part of the Operations Engineering Team, the Manufacturing Engineer is the recognised point of contact for all matters related to their area of expertise, providing engineering advice, problem solving and co-ordination of activities in support of current and future business. The...

Standard Job Description Performs in a collaborative environment to develop and implement manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, fabrication, and material handling. Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement. Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions. Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence. Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence. Leverages factory data to develop statistical process control approaches and...

Standard Job Description Job Description : You will be the Manufacturing Engineer - Level 2 for the International Co-Production Manufacturing Engineering support team which is responsible for... What You Will Be Doing As the Manufacturing Engineer - Level 2 you will be responsible for improving sub assembly build processes and driving cost effective, high quality production for F 16 components. Your responsibilities will include: Support production operations by refining sub assembly processes, eliminating repetitive defects, and reducing unnecessary costs. Develop and modify manufacturing plans, interpreting engineering blueprints to support both production and prototype articles. Investigate and resolve non conformances through root cause analysis and corrective action implementation. Optimize machining strategies for CNC mills and lathes to produce precision components efficiently. Collaborate with quality, production, tooling, and engineering teams...