102 field engineer jobs found

Description: You will be the Depot Field Engineer for the SOF GLSS team. Our team is responsible for depot‑level repairs, modifications, and refurbishments of critical avionic systems supporting Special Operations missions. What You Will Be Doing As the Depot Field Engineer you will be responsible for delivering high‑quality maintenance and repair services that keep mission‑critical equipment operational. Your responsibilities will include, but are not limited to: Performs depot level repairs, modifications, refurbishments of specific components of the Modernized Target Designation Sight/Pilotage Night Vision System (M-TADS/PNVS). Performs repair, rework, fault isolation, troubleshooting, and acceptance test of mechanical, electrical, structural, hydraulic subsystems and complete systems. Operates automated or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators) and uses knowledge of basic AC/DC theory...

Description SAIC is seeking Field Service Engineers (FSE) to support the Medusa Sustainment project, at Andrews Air Force Base, which is a U.S. Air Force solution for defense against small unmanned aerial systems (s-UAS). The Medusa System of Systems is the U.S. Air Force's solution for defense against small unmanned aerial systems (s-UAS) utilizing a government-owned Medusa Command and Control (Medusa C2), which allows for a plug-and-play selection of Passive and Active Sensors, Electronic and Kinetic Weapon Systems, as well as the insertion of a variety of Fusion, Association, Threat and Combat ID Algorithms. The Medusa C2 supports fixed base, portable, mounted and handheld operations. The Medusa Team supports the United States Air Force C-sUAS programs worldwide. Job Responsibilities: Provide field engineering and technical support services to maintain and sustain fielded C-sUAS systems, equipment, and software at designated locations. Install, operate,...

Description: You will be the Field Service Representative (FSR) for the MLRS/HIMARS Team in Grafenwöhr, Germany. Our team ensures the U.S. Army’s M270A2 MLRS and HIMARS platforms stay mission ready by delivering expert fault isolation, diagnostics, and repair of their electrical, hydraulic, and mechanical subsystems. What You Will Be Doing As the FSR you will be the front line technical liaison for our customers, responsible for maintaining and restoring the combat ready status of HIMARS/MLRS systems worldwide. You’ll work closely with the engineering, logistics, and operations groups, and you’ll be ready to deploy to OCONUS and war zone locations whenever the mission requires. Your responsibilities will include: • Perform detailed troubleshooting, fault isolation, and repair on HIMARS/M270A2 electrical, hydraulic, and mechanical systems. • Execute preventative and corrective maintenance in accordance with Army and Lockheed Martin standards. • Provide on site technical...

Description: You will be the Field Service Technician (FST) for the HIMARS Support Team. Our team guarantees that the HIMARS family of medium tactical vehicles (launchers, RSVs, wreckers, trailers, and material handling equipment) operate flawlessly for the Taiwanese Army, from initial assembly through sustainment. What You Will Be Doing As the Field Service Technician you will be the primary point of contact for the Taiwan HIMARS Battalion’s launcher operations, maintenance, and troubleshooting. You’ll work side by side with Taiwanese military personnel and U.S. contractors, delivering hands on support, training, and technical expertise throughout a two year, unaccompanied overseas assignment. Your responsibilities will include: • Diagnose, repair, and calibrate HIMARS launchers, RSVs, wreckers, trailers, and associated equipment in the field and at sustainment levels. • Conduct operator and maintainer refresher training using existing curricula; develop on the spot...

Description: You will be the Field Tactical Trainer Technician for the Fort Irwin Javelin Program Team. Our team keeps the Javelin Field Tactical Trainer running flawlessly at the National Training Center, delivering critical live fire training for warfighters. What You Will Be Doing As the Field Tactical Trainer Technician you will be the on site expert who repairs, stocks, and issues the trainer system while supporting all related logistics. Working full time at Fort Irwin, you will diagnose electronic hardware, perform preventative maintenance, and keep the supply chain humming—all with minimal supervision and a focus on delivering high quality results in a fast moving depot environment. Your responsibilities will include: • Perform repairs and upgrades on the Javelin Field Tactical Trainer using commercial and program specific test equipment. • Follow engineering drawings and site specific procedures to diagnose electronic faults and implement approved solutions. •...

Description: You will be the Field Service Representative (FSR) for the HIMARS/MLRS Support Team. Our team delivers world class sustainment for the U.S. Army’s High Mobility Artillery Rocket System, handling everything from system upgrades to on site fault isolation, diagnostics, and repairs of electrical, hydraulic, and mechanical subsystems. What You Will Be Doing As the FSR you will be the frontline technical ambassador for Lockheed Martin at Fort Drum, NY, providing expert maintenance and rapid trouble shooting for HIMARS/MLRS platforms. You’ll work directly with the Army customer, travel to OCONUS and war zone sites as needed, and ensure mission critical equipment stays mission ready. Your responsibilities will include: • Perform detailed fault isolation, diagnostics, and repair of HIMARS/MLRS electrical, hydraulic, and mechanical systems. • Execute scheduled and unscheduled maintenance on launch vehicles, launch pods, and associated support equipment. • Serve as the...

Description: You will be the Field Service Representative (FSR) for the HIMARS/MLRS Team. Our team delivers world class sustainment for the U.S. Marine Corps HIMARS program—designing, diagnosing, and repairing the rocket launcher’s electrical, hydraulic, and mechanical systems so the warfighter always has precision firepower when it counts. What You Will Be Doing As the HIMARS FSR you will be the technical liaison between Lockheed Martin and the Marine Corps, providing hands on fault isolation, diagnostics, and repair while maintaining the highest standards of professionalism and customer focus. You’ll operate from Camp Pendleton, California, but you must be ready to deploy to OCONUS and, when required, to combat zones. Your responsibilities will include: • Perform detailed troubleshooting, fault isolation, and corrective action on HIMARS/MLRS electrical, hydraulic, and mechanical subsystems. • Execute scheduled and unscheduled maintenance in accordance with Lockheed Martin...

Description: Join the Lockheed Martin Aeronautics Company as an Aircraft Field Service Engineer (FSE) on our Aeronautics Field Sustainment team! This position will support the JASDAF Base Komatsu, in Japan! As a Nose to Tail (NTT) FSE, the preferred candidate will be a subject Matter Expert(SME) in APG/Vehicle Systems (VS). It is desired the individual also be an emerging authority in Supportable Low Observable (SLO)/Structures and Avionics/Mission Systems (MS), with the skill set to accomplish troubleshooting and analysis of VS, MS, or SLO. The candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment Team's technical interface to the on-site Customer (both Operations and Maintenance) in resolving issues arising from maintenance and modification activities for all matters dealing with the F-35 aircraft. What You Will Be Doing Responsibilities include: •Accomplish troubleshooting and analysis of difficulties experienced in the field. • Attend debriefings,...

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an F-16 Field Service Engineer (FSE) to support the Argentina Air Force (FAA) at Rio Cuarto Air Base, Cordoba Province, Argentina. Note: This position is located in Argentina and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration,...

Description: This position will be located at Amendola Air Base, Italy. The successful candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment (AFS) team's technical interface to the on-site customer (Operations and Maintenance) in resolving issues arising from maintenance or modification activities for all matters dealing with the F-35 aircraft. As a Nose to Tail (NTT) FSE, the preferred candidate will be a Subject Matter Expert (SME) in Avionics/Mission Systems (MS). It is also desired that the individual be an emerging authority in Vehicle Systems / APG (VS), and Supportable Low Observable (SLO)/Structures, with the skill set to accomplish troubleshooting and analysis of MS, VS, and SLO. What You Will Be Doing Responsibilities include: • Accomplish troubleshooting and analysis of difficulties experienced in the field. • Attend debriefings, to aid in the rapid identification of emerging issues that require company intervention to avoid aircraft...

Basic Qualifications Requires a Bachelor’s degree in Electrical Engineering, or a related Science, Engineering or Mathematics field. Also requires one year of experience, or a Master's degree.   CLEARANCE REQUIREMENTS: : [Department of Defense Secret security clearance is preferred at time of hire.] Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.   Responsibilities for this Position ROLE AND POSITION OBJECTIVES:   As an electrical engineer support all aspects of Test Engineering you’ll be a member of a cross functional team responsib le for next generation of Radio and Network Products.   We encourage you to apply if you have any of these preferred skills or experiences: Hands on experience interfacing with Test...

Basic Qualifications Bachelor's degree in Electrical Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position The responsibility is career-defining. So is the opportunity. At General Dynamics Mission Systems, we invent the technologies, products and services, that help our nation’s heroes keep our nation safe. The work is so advanced, our teams regularly redefine innovation and excellence for the world. If you’re...

Description: The Sensor Fusion team is seeking a Software Engineer to help prototype and integrate applications and algorithms (C++, C#, Python) spanning the domains of artificial intelligence / machine learning (AI/ML), information fusion, and electronic warfare. You'll have the opportunity to develop cutting-edge Combat Identification solutions and integrate them into the world's most advanced fighters, collaborating closely with our customers and across teams to bring these capabilities to life. What’s In It For You: We offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard,...

Description: Your Impact Lockheed Martin Aeronautics in Marietta, Georgia is looking for a Level 3 Full‑Stack Applications Engineer to power the digital backbone of the C-130 Hercules and the F‑35 Joint Strike Fighter assembly and test facility. As a Forward Deployed Engineer, you’ll build modern, scalable web apps with React, Angular, .NET Core, Node.js, Docker/Kubernetes, and cloud services, turning complex production data into intuitive interfaces that streamline workflows and boost efficiency. What makes this role unique is the hands‑on collaboration with Production Operations — you’ll spend time shadowing on the shop floor and in business meetings listening for pain points to rapidly prototype solutions. Join a mission‑critical environment where your code directly supports a world‑class defense platform, benefit from top‑tier mentors, competitive compensation, and a culture that prizes innovation, safety, and impact. If you thrive at the intersection of cutting‑edge web...

Description: The ADP team is looking for a Sr. Fabrication Manufacturing Engineer to join our team in Palmdale, CA! What You Will Be Doing Lead small teams to ensure production needs are met and discrete deliverables are completed ahead of need. Conduct critical design reviews and collaborate with cross-functional teams to ensure alignment with manufacturing processes. Develop assembly plans and innovative solutions to address daily challenges, ensuring efficient production flow. Create and maintain detailed manufacturing products and documentation. Provide direct support on the production floor, troubleshooting issues and implementing solutions. Utilize Product Lifecycle Management (PLM) and Manufacturing Execution Systems (MES) to develop manufacturing processes. Interpret drawings and model-based designs, translating them into actionable steps for manufacturability for the production environment. Collaborate with team members to explore out-of-the-box thinking and...

Description: Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more — we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We’re creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We’re erasing boundaries and forming partnerships across industries and around the world. We’re advancing spacecraft and the workforce to fuel the next generation. And we’re reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. We are seeking a Packaging Engineer Sr to support Lockheed Martin (LM) Space -...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future! WHO WE ARE Lockheed Martin: An Award-Winning Place to Work THE WORK We are seeking a highly skilled Tool Design Engineer to join our Manufacturing Engineering team, where you will play a critical role in designing, developing, and documenting innovative tools and fixtures for electronic and mechanical assembly processes. As a key member of our team, you will be responsible for managing the entire tool design lifecycle, from concept to completion, including configuration control, purchasing, tool build flow, and documentation. Your expertise will also be applied to creating and releasing...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position The Manufacturing Software Engineer is responsible for developing, and maintaining automated manufacturing methods, processes, and operations for new and existing products. This role involves working closely with design engineering, managing manufacturing process capital, and...

Description Description: SAIC is looking for an Engineering Technician V to support CAC2S-Afloat systems and in Bedford, IN. JOB DESCRIPTION: To be covered by these definitions, employees must meet all of the following criteria: Be able to provide semi-professional technical support for engineers working in such areas as research, design, development, testing, or manufacturing process improvement. Work pertains to electrical, electronic, or mechanical components or equipment. These technicians are required to have some practical knowledge of science or engineering. Some positions may require a practical knowledge of mathematics or computer science. Included are workers who prepare design drawings and assist with the design, evaluation, and/or modification of machinery and equipment. Excluded are: a. Production and maintenance workers, including workers engaged in calibrating, repairing, or maintaining electronic equipment (see Maintenance...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. We are seeking a skilled Manufacturing Engineer to join our team, with a primary focus on training and developing the skills of personnel in multiple job functions throughout Moorestown. As a Manufacturing Engineer, you will play a critical role in ensuring that our team has the knowledge and expertise to produce high-quality products that meet the highest industry standards. THE WORK As a Manufacturing Engineer focused on training and development, you will work closely with our production team to ensure that they have the skills and knowledge required...