38 field service engineer jobs found

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an F-16 Field Service Engineer (FSE) to support the Argentina Air Force (FAA) at Rio Cuarto Air Base, Cordoba Province, Argentina. Note: This position is located in Argentina and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration,...

Description: You will be the Manufacturing Engineer Sr. (Electronics Fabrication, Level 3) for the Missiles and Fire Control Manufacturing Engineering team. Our team is responsible for supporting sustainment re‑cap, re‑certification (MRO), and Customer Field Service (CFS) for missile systems. What You Will Be Doing As the Manufacturing Engineer Sr. you will be responsible for developing and maintaining manufacturing processes, work instructions, and risk‑mitigation plans while driving cost‑reduction initiatives. Your responsibilities will include, but are not limited to: Create and maintain work instructions, task lists, and re‑work/repair procedures for circuit card assemblies, harnesses, and electromechanical sub‑assemblies. Identify production risks, develop mitigation plans, and lead validation activities on the shop floor. Drive cost‑reduction projects to closure and support testing, tooling, and hardware issue resolution. Lead...

Description: Your Impact: As a Industrial Engineer (level 2) in Greenville, SC, you will play a critical role in driving operational excellence across our production and manufacturing facilities. This position supports key aerospace programs by analyzing workflows, enhancing processes, and implementing efficiency improvements that directly impact performance, cost, and safety. You’ll work collaboratively with cross-functional teams to identify opportunities, develop innovative solutions, and contribute to the overall success of our operations. If you’re a strategic thinker with a passion for continuous improvement and lean manufacturing, this is an exciting opportunity to make a measurable difference in a fast-paced, mission-driven environment. What You Will Be Doing: - Analyze and design workflows and sequences of operations to boost productivity and reduce inefficiencies across plant and production facilities. - Optimize equipment layouts and labor utilization to maximize...

Basic Qualifications Requires a Bachelor’s degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Candidates must be able to obtain a Secret clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine building your career by developing the solutions that support the mission of our nation's service members, intelligence analysts and first responders. That's the challenge waiting for you at General...

Basic Qualifications Bachelor's degree in Engineering, or a related Science or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience. Responsibilities for this Position Imagine building your career by developing the solutions that support the mission of our nation’s service members, intelligence analysts and first responders. That’s the challenge that’s waiting for you at General Dynamics Mission Systems. Here you have the opportunity to redefine innovation and excellence for the world. Are you ready? Then make a career move that makes an impact at General Dynamics Mission Systems. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers’ missions in cyber, RF, undersea, interstellar and everything in between. We seek an experienced Advanced Quality Engineer to...

Basic Qualifications Requires a Bachelor’s degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Candidates must be able to obtain a Secret clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine building your career by developing the solutions that support the mission of our nation's service members, intelligence analysts and first responders. That's the challenge waiting for you at General...

Basic Qualifications Requires a Bachelor’s degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.       CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they're often classified. That's what you'll find at General Dynamics Mission Systems. Here you'll work with amazing engineers as they invent the...

Basic Qualifications Requires a Bachelor’s degree in Engineering, or a related Science, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree and 6 months of job-related experience.     CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they're often classified. That's what you'll find at General Dynamics Mission Systems. Here you'll work with amazing engineers as they invent the technologies,...

Position: Data Engineer / ML Engineer Job Description: Position: Data & ML Engineer Location: Ahmedabad | Pune | Indore Experience: 4–8 Years Preferred Notice Period: Immediate to 30 Days   About the Role We are looking for a passionate Data & ML Engineer to join our engineering team and build scalable, production-grade data and machine learning solutions. In this role, you will design and develop robust data pipelines, deploy machine learning models, build high-performance APIs, and collaborate with cross-functional teams to deliver intelligent, cloud-native applications. If you are passionate about solving complex data challenges and building reliable ML infrastructure at scale, we'd love to hear from you.   Key Responsibilities Design and develop scalable feature engineering pipelines for machine learning applications. Build and maintain batch scoring pipelines to support large-scale ML workloads. Develop, deploy,...

Description: You will be the Chief Manufacturing Engineer - Producibility Owner - Level 6 for the Production Engineering team which is responsible for establishing and advancing producibility across the AMMM portfolio. What You Will Be Doing As the Chief Manufacturing Engineer - Producibility Owner - Level 6 you will be responsible for defining the Producibility Program, guiding design‑for‑manufacturability, and leading change‑control activities that enable high‑rate production. Your responsibilities will include: Establish and drive the Producibility Program, integrating shaping, deployment, and design‑for‑manufacturability with Design and Quality Engineering. Lead the Manufacturing Change Control Board (MCCB) as chair, overseeing configuration control and change‑management for all tooling and process updates. Partner with OpsTech to identify and implement technology‑integration opportunities that enhance producibility. Serve as the primary liaison...

Basic Qualifications Bachelor's degree in Manufacturing or Industrial Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience.   CLEARANCE REQUIREMENTS: : Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation’s heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what’s possible. Here you’ll work with the best...

Basic Qualifications Minimum of 25 weeks of military technical training school, along with an additional 6 years of related experience is required. or 2 years of directly related non-military technical trade school or the equivalent experience, along with an additional 6 years of related experience is required. Industry certifications are highly preferred. Field service or technical activity is preferred. or Bachelor's degree in a technical field or the equivalent experience, along with an additional 2 years of related experience is required.   CLEARANCE REQUIREMENTS:   Department of Defense Secret security clearance is required within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for...

Description: Your Impact Lockheed Martin Aeronautics in Marietta, Georgia is looking for a Level 3 Full‑Stack Applications Engineer to power the digital backbone of the C-130 Hercules and the F‑35 Joint Strike Fighter assembly and test facility. As a Forward Deployed Engineer, you’ll build modern, scalable web apps with React, Angular, .NET Core, Node.js, Docker/Kubernetes, and cloud services, turning complex production data into intuitive interfaces that streamline workflows and boost efficiency. What makes this role unique is the hands‑on collaboration with Production Operations — you’ll spend time shadowing on the shop floor and in business meetings listening for pain points to rapidly prototype solutions. Join a mission‑critical environment where your code directly supports a world‑class defense platform, benefit from top‑tier mentors, competitive compensation, and a culture that prizes innovation, safety, and impact. If you thrive at the intersection of cutting‑edge web...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position The Manufacturing Software Engineer is responsible for developing, and maintaining automated manufacturing methods, processes, and operations for new and existing products. This role involves working closely with design engineering, managing manufacturing process capital, and...

Basic Qualifications Bachelor's degree in Systems Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 8 years of relevant experience; or Master's degree, plus a minimum of 6 years of relevant experience. Responsibilities for this Position What You'll Own Domain ontologies. Design and maintain semantic schemas that describe key engineering and manufacturing entities — products, BOMs, plants, equipment, processes, work orders — and their relationships across systems. Knowledge graphs. Implement ontologies using semantic web or graph technologies (RDF/OWL/SHACL/SPARQL or property-graph equivalents like Neo4j). Build, query, validate, and tune knowledge graphs in production. Data alignment. Integrate heterogeneous data sources — PLM, ERP, MES, CMMS, QMS, data lakes — into a common vocabulary. Align schemas, code sets, and master data to the ontology so AI services see one coherent picture....

Basic Qualifications Bachelor's degree in Manufacturing or Industrial Engineering, or a related Science, Engineering or Mathematics field, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation's heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what's possible. Here you'll work with the best and your talent will be front and center on projects that impact the world. Are you up to the challenge?   We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar space and everything in between. As our dedicated Industrial Engineer, you will systematically...

Description: This position will be located at Amendola Air Base, Italy. The successful candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment (AFS) team's technical interface to the on-site customer (Operations and Maintenance) in resolving issues arising from maintenance or modification activities for all matters dealing with the F-35 aircraft. As a Nose to Tail (NTT) FSE, the preferred candidate will be a Subject Matter Expert (SME) in Avionics/Mission Systems (MS). It is also desired that the individual be an emerging authority in Vehicle Systems / APG (VS), and Supportable Low Observable (SLO)/Structures, with the skill set to accomplish troubleshooting and analysis of MS, VS, and SLO. What You Will Be Doing Responsibilities include: • Accomplish troubleshooting and analysis of difficulties experienced in the field. • Attend debriefings, to aid in the rapid identification of emerging issues that require company intervention to avoid aircraft...

Basic Qualifications Bachelor’s degree in Mechanical Engineering, or a related Science, Engineering or Mathematics field.   CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you’ll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve...

Basic Qualifications Associate’s degree in a related field or the equivalent is required. In addition, a minimum of 3 years of directly related experience is required. J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required. CLEARANCE REQUIREMENTS: Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you’ll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as Artificial...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 2+ years of job-related experience, or a Master's degree plus 6 months of job-related experience.     CLEARANCE REQUIREMENTS: Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position We are seeking a highly skilled Manufacturing Engineer to support the Micro-Electronics value stream in a Low Volume, Medium Mix, High Value manufacturing facility for spaceflight hardware. The successful candidate will work in a small team environment and will be responsible for ensuring the efficient and effective manufacturing of high-quality...