188 production assembler jobs found

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: You will be the Production Assembler - Structures for the team which is responsible for building structural assemblies such as ribs, bulkheads, doors, and other components. What You Will Be Doing As the Production Assembler - Structures, you will be responsible for loading, aligning, and clamping parts and sub-assemblies into jigs in established sequences using jig locators and coordinated pilot holes. Your responsibilities will include: Drilling holes using drill plates, jig details, templates, or through pilot holes Trimming skins and parts using jig detail scribe bars or after reverse-scribing trim lines from adjacent skins Laying out fastener-hole pattern spacing and edge distance, trim lines, and location of components to standard and readily-maintained tolerances by direct measurement from known and available physical reference points Fabricating and installing shims, stiffeners, doublers, and other components as required...

Description: You will be the Production Assembler C130 for the team which is responsible for using jigs, fixtures, rivet‑upsetting equipment, and hand tools to assemble aircraft components. What You Will Be Doing As the Production Assembler C130, you will be responsible for reading and interpreting detail, assembly, and installation blueprints or other authorized documents to obtain assembly and installation information and material callouts. Your responsibilities will include: Setting up and using jigs and fixtures to ensure precise part alignment Operating rivet‑upsetting and bench‑assembly equipment to secure fasteners Applying rules, squares, protractors, and dividers to verify geometry and dimensions Performing arithmetic, including decimals and fractions, to calculate material requirements and tolerances Working to exacting tolerances required for each assembly operation What’s In It For You We are committed to supporting your...

Description: You will be the Production Assembler - F35 for the team which is responsible for assembling and installing various components of the F35 aircraft. What You Will Be Doing As the Production Assembler - F35, you will be responsible for using jigs and fixtures, rivet upsetting and bench assembly equipment, and hand tools to assemble and install components. Your responsibilities will include: Using rules, squares, protractors, and dividers to ensure accurate assembly and installation Reading and interpreting detail, assembly, and installation blueprints or other authorized documents to obtain assembly and installation information and material callouts Using arithmetic, including decimals and fractions, to perform calculations and measurements Working to tolerances as required for the type of work described herein Assembling and installing components using jigs and fixtures, rivet upsetting and bench assembly equipment, and hand tools...

Description: Job Description You will be the Manufacturing Supervisor for the Machining Operations Center (MOC). From ultra‑precision machining, paint and plating operations, and precision assembly, to the development and production of complex machined components, the Machining Operations Center does it all. What You Will Be Doing As the Manufacturing Supervisor, you’ll be at the helm of coordinating multiple processes, ensuring smooth production flow, and meeting key performance goals. Prioritize hardware through various production stages and communicate hardware status to leadership. Lead efforts in managing quality, schedule, and cost goals across several work cells. Collaborate with teams to drive process improvements and optimize workflows. Inspire and motivate team members, setting high standards for performance excellence and fostering an environment where everyone can thrive. Why Join Us We’re looking for a collaborative and driven leader...

Description: You will be the Manufacturing Engineer (Level 2) for the Manufacturing Engineering team. Our team is responsible for improving the producibility of early designs and creating manufacturing plans and processes that support the evolving demands of the Warfighter. What You Will Be Doing As the Manufacturing Engineer you will be responsible for developing and executing manufacturing processes that enable efficient, high‑quality production while partnering closely with cross‑functional stakeholders. Your responsibilities will include, but are not limited to: Develop and implement robust manufacturing processes and procedures. Collaborate with cross‑functional teams to identify and resolve production issues. Drive continuous improvements to manufacturing workflows. Ensure compliance with all quality and safety standards. Provide technical support and manufacturing feedback on new product designs. Why Join Us The ideal candidate is...

Description: You will be the Second Shift Multi‑Functional Manufacturing Supervisor for the Special Operations Forces – Global Logistics Support Services (SOF GLSS) team. Our team is responsible for delivering world‑class logistics, maintenance, and sustainment services to U.S. Special Operations Command. What You Will Be Doing As the Second Shift Multi‑Functional Manufacturing Supervisor you will be responsible for overseeing day‑to‑day production operations across multiple manufacturing functions while ensuring cost, schedule, quality, and continuous‑improvement objectives are met. Your responsibilities will include: Direct a team of production‑operations employees, assigning tasks and ensuring proper execution. Oversee multiple functional areas—including modification, integration, assembly, inspection, repair, and test—to keep the line running smoothly. Drive build plans and implement changes that improve quality, schedule adherence, and cost performance. Promote and...

Basic Qualifications Bachelor’s degree or equivalent is required plus a minimum of 2 years of relevant experience. Prior production supervisory experience preferred. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine building your career by developing the solutions that support the mission of our nation’s service members, intelligence analysts and first responders. That’s the challenge that’s waiting for you at General Dynamics Mission Systems. Here you have the opportunity to redefine innovation and excellence for the world. Are you ready? Then make a career...

Basic Qualifications • Bachelor’s degree or equivalent combination of education and relevant work is required plus a minimum of 2 years of relevant experience; or • Master's degree. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Candidates must be able to obtain a Secret clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Imagine a world-class engineering environment. Now add a team of exceptional talent along with technologies that are so advanced they’re often classified. That’s what you’ll find at General Dynamics Mission Systems. Here you’ll lead amazing engineers as they...

Description: As a Manufacturing Engineering Associate Manager on the Next Generation Interceptor (NGI) team in Courtland, AL, you will help lead the production of advanced missile defense technology. You will drive the improvement of manufacturing processes, support production operations, and contribute to a team that strengthens national security. This role blends technical expertise with managing a team of manufacturing engineers in a dynamic manufacturing environment. Basic Qualifications: • Active Secret security clearance • Experience with Final Assembly manufacturing environment • Experience with Design for Manufacturing to implement process improvements and ensure a producible product • Familiar with Creo, Windchill, SAP to optimize production processes and improve efficiency • Familiar with initial setup of a production line • Basic understanding of MBOM and Work Instruction creation/maintenance Desired Skills: • Experience with Missile Defense Agency (MDA) or missile...

Description: As a Staff Manufacturing Engineer, you will be responsible for developing and optimizing manufacturing processes and procedures to drive operational excellence. You will leverage your expertise in materials, tooling, and process flow to define build sequences and ensure product quality, efficiency, and manufacturability. Key Responsibilities: Develop, implement, and refine manufacturing processes and build sequences based on a strong understanding of materials and fabrication techniques. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Identify and resolve issues related to tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Collaborate with design engineering teams to provide feedback on design concepts and specifications, ensuring manufacturability and optimal use of available equipment and methods. Operate within a...

Description: Job Description You will be the Manufacturing Engineer Staff for the Manufacturing Engineering team. Our team is responsible for improving the producibility of early designs and creating manufacturing plans and processes that support the evolving demands of the Warfighter. What You Will Be Doing As the Manufacturing Engineer Staff you will be responsible for developing and executing manufacturing processes that enable efficient, high‑quality production while partnering closely with cross‑functional stakeholders. Develop and implement robust manufacturing processes and procedures. Collaborate with cross‑functional teams to identify and resolve production issues. Drive continuous improvements to manufacturing workflows. Ensure compliance with all quality and safety standards. Provide technical support and manufacturing feedback on new product designs. Why Join Us We are looking for a collaborative, results‑driven professional who...

Description: You will be the Manufacturing Engineer Sr. (PWB Manufacturing, Level 3) for the Missiles & Fire Control Manufacturing Engineering – Dallas Electrical Shop PWB team. Our team is responsible for delivering high‑quality printed wiring boards (PWB) that enable mission‑critical missile systems. What You Will Be Doing As the Manufacturing Engineer Sr. (PWB Manufacturing, Level 3) you will be responsible for advancing manufacturing processes, work instructions, and risk‑mitigation strategies for PWB manufacturing. Your responsibilities will include, but are not limited to: Analyze and maintain chemical compositions of PWB manufacturing solutions and baths within acceptable operating limits. Develop, create, and maintain work instructions, task lists, and re‑work/repair guides for non‑conformance processing. Identify production risks, devise mitigation plans, and lead validation activities for new manufacturing lines. Drive cost‑reduction...

Description: You will be the Manufacturing Engineer Sr. (PWB Manufacturing, Level 3) for the Missiles & Fire Control Manufacturing Engineering – Dallas Electrical Shop PWB team. Our team is responsible for delivering high‑quality printed wiring boards (PWB) that enable mission‑critical missile systems. What You Will Be Doing As the Manufacturing Engineer Sr. you will be responsible for advancing manufacturing processes, work instructions, and risk‑mitigation strategies for PWB manufacturing. Your responsibilities will include, but are not limited to: Develop, create, and maintain work instructions, task lists, and re‑work/repair guides for non‑conformance processing. Identify production risks, devise mitigation plans, and lead validation activities for new manufacturing lines. Drive cost‑reduction initiatives from concept through closure while ensuring schedule, quality, and safety targets are met. Support testing, hardware, and tooling issues;...

Description: You will be the Manufacturing Engineer Stf. (PWB Manufacturing, Level 4) for the Missiles & Fire Control Manufacturing Engineering – Dallas Electrical Shop PWB team. Our team is responsible for delivering high‑quality printed wiring boards (PWB) that enable mission‑critical missile systems. What You Will Be Doing As the Manufacturing Engineer Stf. (PWB Manufacturing, Level 4) you will be responsible for advancing manufacturing processes, work instructions, and risk‑mitigation strategies for PWB manufacturing. Your responsibilities will include, but are not limited to: Analyze and maintain chemical compositions of PWB manufacturing solutions and baths within acceptable operating limits. Develop, create, and maintain work instructions, task lists, and re‑work/repair guides for non‑conformance processing. Identify production risks, devise mitigation plans, and lead validation activities for new manufacturing lines. Drive cost‑reduction...

Description: You will be the Manufacturing Engineer Manager (Level 5) for the Missiles & Fire Control Manufacturing Engineering – Dallas Electrical Shop PWB/PCB team. Our team is responsible for delivering high‑quality printed wiring boards (PWB) that enable mission‑critical missile systems. What You Will Be Doing As the Manufacturing Engineer Manager (Level 5) you will be responsible for leading the Electronics Fabrication effort within the Dallas Electrical Shop. Your responsibilities will include, but are not limited to: Define, implement, and continuously improve PWB manufacturing processes and work instructions. Lead a multidisciplinary team of engineers and technicians to meet schedule, quality, and cost targets. Coordinate with design, test, and supply‑chain partners to resolve fabrication issues and ensure compliance with missile‑system requirements. Drive root‑cause analysis and corrective‑action programs for non‑conformances and...

Basic Qualifications General Dynamics Mission Systems (GDMS), a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to our customers.   General Dynamics Mission Systems has an immediate opening for an Engineer to join our Manufacturing team. The position provides an opportunity to develop and advance the cutting-edge technology that supports some of our nation's fundamental defense services. General Dynamics Mission Systems employees work closely with esteemed clients to develop solutions that allow them to carry out high-stakes national security missions.The selected candidate will work with collaborative teams to design and produce the state-of-the-art products that support General Dynamics Mission Systems and our clients. In addition to receiving a competitive salary and generous health and personal benefits, the Engineer will enhance their skill set among a talented and technically accomplished group...

Description: WHAT WE’RE DOING At Lockheed Martin Rotary and Mission Systems, we're on a mission to drive innovation and uphold the highest standards of business ethics. We believe that by pushing the boundaries of visionary thinking, we can achieve exceptional results. As a Lockheed Martin employee, you'll have the opportunity to make a meaningful impact while working in an environment that values integrity and excellence. THE WORK - The select candidate will manage the Clearwater production team in the area of Console Assembly and Integration. - Maintain full responsibility for ensuring hardware content meets all requirements and is executed within the Hours Per Unit (HPU) and schedule allocation. - One of the key aspects of this position is to identify and implement changes to continually improve quality, schedule and cost. - Proactively drive continuous improvement and development of talent. - The candidate will be responsible for developing, implementing and improving...

Description: We are Lockheed Martin The story of aviation has always been the story of people who have the courage to fail, to try again and to one day succeed. Since Lockheed Martin’s inception and continuing today, the passion to advance aeronautical design and help our customers achieve mission success has been ingrained in our culture. It is that passion combined with a strategic focus on ever changing global challenges that shapes our path forward. Lockheed Martin is seeking a Manufacturing Engineer for the F-35 Program WHAT YOU WILL BE DOING This role is responsible for tooling and factory transition execution for the F-35 FACO, Fabrication, and Finishes (CFF/LFF) build areas. This role may support both domestic and international tooling projects. • Ensure tools and equipment are specified, scoped and built to meet engineering specifications and manufacturing requirements. • Responsible for developing robust Statements of Work (SOWs) when contracting suppliers to...

Basic Qualifications Requires a Bachelor’s degree in Manufacturing or Industrial Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience.     CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Candidates must be able to obtain a Secret clearance within a reasonable amount of time from date of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation’s heroes keep our nation safe. The work we do is so advanced,...