11 technical lead jobs found

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: You will be the C-130 Final Assembly Manager - Level 5 for the Final Assembly, Trim, Engine Shop and Component Paint team which is responsible for delivering high‑quality C130J aircraft. What You Will Be Doing As the C-130 Final Assembly Manager - Level 5 you will be responsible for leading culture, safety, FOD, quality, cost and schedule obligations for a 130‑person team on the C130J program. Your responsibilities will include: Drive a safety‑first culture and enforce FOD‑control standards. Ensure product quality meets stringent aerospace requirements. Manage cost performance and drive continuous improvement. Maintain schedule fidelity and mitigate delivery risks. Mentor and develop both salaried staff and artisans/mechanics. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits...

Description: You will be the Assembly Worker Structures - A&P - C130 for the team which is responsible for building and/or mating structures where the assembly is coordinated, or built with the benefit of tooling with established primary locations. What You Will Be Doing As the Assembly Worker Structures - A&P - C130, you will be responsible for performing such operations as minor reforming of parts to correct contour, crimping, trimming, and filing parts to fit, framing, skinning, riveting, and attaching fittings and installations required to obtain a finished assembly. Your responsibilities will include: Drilling and reaming to specified tolerances, and milling rivets as required Installing incidental plumbing, electrical rigging, or other functional items as required by practical assembly sequence Installing typical items such as braces, brackets, platenuts, and clips for fastening, hanging, or supporting installations Disassembling and/or...

Description: You will be the Production Assembler C130 for the team which is responsible for using jigs, fixtures, rivet‑upsetting equipment, and hand tools to assemble aircraft components. What You Will Be Doing As the Production Assembler C130, you will be responsible for reading and interpreting detail, assembly, and installation blueprints or other authorized documents to obtain assembly and installation information and material callouts. Your responsibilities will include: Setting up and using jigs and fixtures to ensure precise part alignment Operating rivet‑upsetting and bench‑assembly equipment to secure fasteners Applying rules, squares, protractors, and dividers to verify geometry and dimensions Performing arithmetic, including decimals and fractions, to calculate material requirements and tolerances Working to exacting tolerances required for each assembly operation What’s In It For You We are committed to supporting your...

Description: You will be the Chief Manufacturing Engineer - Producibility Owner - Level 6 for the Production Engineering team which is responsible for establishing and advancing producibility across the AMMM portfolio. What You Will Be Doing As the Chief Manufacturing Engineer - Producibility Owner - Level 6 you will be responsible for defining the Producibility Program, guiding design‑for‑manufacturability, and leading change‑control activities that enable high‑rate production. Your responsibilities will include: Establish and drive the Producibility Program, integrating shaping, deployment, and design‑for‑manufacturability with Design and Quality Engineering. Lead the Manufacturing Change Control Board (MCCB) as chair, overseeing configuration control and change‑management for all tooling and process updates. Partner with OpsTech to identify and implement technology‑integration opportunities that enhance producibility. Serve as the primary liaison...

Description: You will be the Sr. Operations Technician - Level 3 for the Flight Line Operations team which is responsible for interpreting engine‑run and flight‑debrief data, leading maintenance crews, and maintaining fault‑tracking systems. What You Will Be Doing As the Sr. Operations Technician - Level 3 you will be responsible for providing technical support to flight‑line personnel, ensuring accurate data capture, and maintaining safe, efficient operations. Your responsibilities will include: Interpret engine‑run and flight‑debrief information and enter data into the tracking/troubleshooting database. Lead a maintenance crew of 10+ represented employees, coordinating daily tasks and safety compliance. Research and provide blueprints and technical documentation to flight‑line technicians. Identify, track, and report fault anomalies, supporting root‑cause analysis and corrective actions. Serve as flight‑line supervisor when required, including...

Description: You will be the Manufacturing Engineer - Electrical Planner Level 2 for the Electrical Pre‑Planning Team which is responsible for initiating manufacturing planning activities and establishing the foundation for successful product‑interface execution. What You Will Be Doing As the Manufacturing Engineer - Electrical Planner Level 2 you will be responsible for leading early‑stage planning for new product introductions and translating electrical design requirements into actionable manufacturing plans. Your responsibilities will include: Lead the early‑stage planning process, defining manufacturing requirements and aligning them with product design. Create pre‑plans that cover tooling needs, material flow, and labor‑charging requirements to set realistic execution targets. Partner with electrical engineering, design engineering, supply‑chain, quality, and production teams to capture interface requirements and close design‑to‑manufacturing gaps....

Description: You will be the Flight Line Test Mechanic C-130 for the team which is responsible for performing the servicing and troubleshooting of complex aircraft systems. What You Will Be Doing As the Flight Line Test Mechanic C-130, you will be responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service aircraft structures, hydraulic and plumbing, rigging, and mechanical systems, and power plants requiring ingenuity in deviating from standard practices and in adapting and altering structures and systems configurations to meet special requirements. Your responsibilities will include: Making changes and replacements to hydraulic, plumbing, and rigging systems, fuel and oil units, power plants, etc. Making any permissible adjustments to ship's systems in order that they meet flight line requirements Mocking-up, fabricating, and installing new parts, structures, and systems and performing final flight...

Description: You will be the Flight Line Electrician - C130 for the team which is responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service complex aircraft electrical systems equipment. What You Will Be Doing As the Flight Line Electrician - C130, you will be responsible for mocking up, fabricating, and installing experimental systems and equipment and performing final flight-servicing, troubleshooting, and operational checkout before and after flight to ensure airworthiness and conformance to applicable design specifications. Your responsibilities will include: Conducting power plant runs or working with mechanics in conducting such runs; making adjustments and replacements of electrical components and accessories Investigating any malfunctioning of electrical equipment before and after flight test; analyzing systems and diagnosing trouble Performing necessary operations to correct trouble,...

Description: You will be the Completion Supervisor Flight Line - Level 3 for the Flight Line Operations team which is responsible for overseeing flight‑line completion activities and ensuring safe, on‑time aircraft readiness. What You Will Be Doing As the Completion Supervisor Flight Line - Level 3 you will be responsible for directing represented mechanics and electricians, managing work assignments, and maintaining safety and quality standards on the flight line. Your responsibilities will include: Supervise crews of mechanics and electricians performing systems testing, ground checks, and flight preparations, adjusting assignments to meet tactical and strategic goals. Ensure tasks are completed on schedule and within budget, reviewing work for quality, efficiency, and compliance with established procedures. Maintain a clean, organized work area using “Clean As You Go” practices and enforce tool‑control policies. Conduct scheduled and unscheduled...

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...