29 manufacturing engineering jobs found in Arlington

Description: You will be the Manufacturing Engineer Sr (Level 3) for the PAC-3 Munitions Acceleration team. Our team is responsible for the successful execution of a large ramp‑to‑rate effort with a heavy focus on supporting proposals, collaborating on make‑where decisions, and driving tooling from identifying the need to delivery and prove‑out. What You Will Be Doing As the Manufacturing Engineer Sr (Level 3) you will be responsible for supporting proposals and coordinating the identification, design, procurement, delivery, and prove‑out of PAC‑3 tooling. Your responsibilities will include, but are not limited to: Generate proposal artifacts including make or buy plans, MESOWs, BOEs Generate Tangible Item Lists (TILs) and labor estimates to enable make‑where and make‑split decisions Plan budgets and Integrated Master Schedule (IMS) activities, and coordinate make‑site efforts Write Tooling Action Requests (TARs), develop tooling Statements of Work...

Description: You will be the Procurement Engineering Manager for the Procurement Engineering team. Our team is responsible for supporting PAC‑3 Production efforts and reducing risk in the supply base. What You Will Be Doing As the Procurement Engineering Manager you will be responsible for leading a high‑performing group of engineers, driving standardized processes, and delivering cost‑ and schedule‑focused solutions. Your responsibilities will include, but are not limited to: Lead a team of Procurement Engineers supporting PAC‑3 Production. Provide training and coaching to standardize and streamline production processes. Support Production Supply Chain Management Teams and manage risk/opportunity initiatives. Manage the Statement of Requirements (SOR) and participate in change‑management activities. Conduct capacity and capability analysis and facilitate process‑improvement actions such as PFMEA, failure investigations, and corrective actions....

Description: You will be the THAAD Production Operations Acceleration Project Team Member for the Munitions Acceleration Project Team. Our team drives production throughput and equipment integration across nine Lockheed Martin sites. What You Will Be Doing As the THAAD Production Operations Acceleration Project Team Member you will be responsible for leading equipment roll‑outs and delivering data‑driven efficiency improvements. Your responsibilities will include, but are not limited to: Own the end‑to‑end rollout of equipment from procurement through installation, verification, and ramp‑up. Develop and manage detailed project schedules and risk registers, ensuring milestones are met on time and within cost. Analyze line performance, identify bottlenecks, and create data‑driven improvement plans. Coordinate with Manufacturing, Engineering, Quality, Safety, Supply Chain, and Finance stakeholders. Champion a continuous‑improvement culture by...

Description: Lockheed Martin Missiles and Fire Control (MFC) is looking to hire a Production Resiliency Quality Engineer to support our Arlington, TX site. What You Will Be Doing A Production Resiliency Quality Engineer applies quality principles in the areas of: design, incoming material, production control, product evaluation, program performance, reliability, inventory control, and/or research and development as they apply to product or process quality for make and/or buy products. Our ideal candidate will be able to: -Perform technical evaluations including product requirements, specifications, models/designs, drawings and procedures. -Collaborate with program management, engineering, manufacturing, supply chain and customers on quality related issues to ensure quality standards are in place. -Engage in product failure investigations, material review board decisions and corrective/preventive action. -Ensure corrective measures meet acceptable reliability standards...

Description: You will be the Electrical Engineering Manager for the PAC-3 missile program at Lockheed Martin Missiles and Fire Control in Dallas, Texas. Our team is responsible for designing, developing, and manufacturing precision engagement aerospace and defense systems for the U.S. and allied militaries, with a focus on advanced combat, missile, and rocket systems. What You Will Be Doing As the Electrical Engineering Manager, you will be responsible for leading engineering activities supporting PAC-3 production across all sites. Your responsibilities will include: • Serving as the Electrical Engineering Lead and Product Engineer, ensuring technical issues are addressed and resolved to support contractual delivery schedules • Acting as Cost Account Manager (CAM) and Failure Review Board (FRB) Technical Lead • Providing technical support for Failure Analysis (FA) and associated engineering evaluations • Driving technical excellence, affordability, and program execution,...

Description: Lockheed Martin is seeking an experienced Program Quality Engineer (QE) Sr based in Arlington, TX supporting the PAC-3 MSE Production program. What You Will Be Doing This position requires mechanical or quality engineering experience developing and reviewing quality standards, methods, work instructions and procedures for the inspection of manufactured and procured products. Duties include but are not limited to: · Ensure contractual quality requirements are implemented and verified, along with interfacing with sites daily. · Participate (as required) in failure/diagnosis and Material Review Board (MRB) activities which includes dispositioning non-conforming hardware, identifying hardware containment requirements, identifying appropriate root cause and corrective action is taken to prevent recurrence. · Reading and interpreting engineering requirements, specifications and applying their intent for evaluating acceptance of quality products. · Provide technical...

Description: You will be a Senior Quality Engineer for the PAC 3 Missile and Launcher Evolutionary Development and Transition to Production team. Our team is responsible for delivering cutting edge missile and launcher solutions that meet rigorous quality and performance standards. What You Will Be Doing As a Quality Engineer you will be responsible for leading quality initiatives across the development program, partnering with engineering, manufacturing, subcontracting, program management, suppliers, and the customer to ensure quality objectives are met throughout development, testing, and transition to production. Your responsibilities will include, but are not limited to: • Developing program plans and performing Product Development Process assessments. • Implementing and tracking quality requirements and development process requirements, conducting design reviews and process assessments, reducing design and process risk, and driving closure of non conformances during...

Description: You will be the Supplier Quality Engineer Senior for Lockheed Martin's PAC-3 Missile and Launcher Evolutionary Development and Transition to Production programs, based in Arlington, TX. Our team is responsible for ensuring the quality of products and services provided by suppliers, and you will play a key role in leading quality initiatives and collaborating with cross-functional teams to achieve program objectives. What You Will Be Doing As the Supplier Quality Engineer Senior, you will be responsible for performing scheduled product source inspections, first articles, and product line validations at suppliers, as well as providing internal and supplier support for root cause and corrective/preventive actions. You will also participate in supplier failure/diagnosis and Material Review Board (MRB) activities, and provide technical liaison support related to quality engineering matters. Your Responsibilities will include: - Perform scheduled product source...

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our employees by fostering innovation, integrity, and exemplifying the epitome of corporate responsibility. Your Mission is Ours. Lockheed Martin Missiles and Fire Control is seeking an early career manufacturing engineer. In this role, you will be supporting the PAC-3 Missile Program. The successful candidate will have experience and/or knowledge of manufacturing processes and...

Description: Lockheed Martin is seeking an experienced Program Quality Engineer (QE) Staff based in Arlington, TX supporting the PAC-3 Production program. What You Will Be Doing The Quality professional will be responsible for the strategic leadership and performance; specifically, manufacturing site performance, continuous improvement, talent development, training, and knowledge continuity. Specifically in activities associated with Production Rate Ramping and Acceleration. The candidate will act as a Subject Matter Expert in Quality Engineering and as an Advisor for the Quality team. This position requires that the candidate staycurrent with industry standards, solutions, and leverage technology into Missiles & Fire Control (MFC). Duties include but are not limited to: • Ensure contractual quality requirements are implemented and verified. • Perform technical evaluations including product requirements, specifications, models/designs, drawings and procedures. •...

Description: Preferred work locations are Orlando, FL, Dallas, TX or Washington, DC. However other locations will be considered You will be the Program Manager Senior Manager for the Advanced Programs (AP) team at Lockheed Martin Missiles and Fire Control (LMMFC). Our team is responsible for researching, developing, and delivering leading-edge software, hardware, and security solutions to protect platform/weapon systems from sophisticated threats. What You Will Be Doing As the Program Manager Senior Manager, you will be responsible for leading cross-disciplinary teams in the development and transition of advanced technologies, focusing on Spectrum Dominance/Radio-Frequency (RF)/Electronic Warfare (EW), embedded cyber security, and advanced microelectronics programs. Your responsibilities will include but are not limited to: • Directing all phases of programs from inception through completion, ensuring cost, schedule, and technical performance • Participating in contract...

Description: You will be the Manufacturing Planner (Level 2) for the PAC‑3 Program Team. Our team is responsible for overseeing program and manufacturing planning, managing production schedules, material procurement, and workflow prioritization. What You Will Be Doing As the Manufacturing Planner Associate (Level 2) you will be responsible for ensuring data integrity in the MRP system, optimizing material flow, and delivering accurate production status to stakeholders. Your responsibilities will include, but are not limited to: Maintain data integrity in the MRP system and manage material flow, inventory optimization, and production schedules. Provide status reports to internal customers and analyze production data to inform business decisions. Coordinate with engineering, quality assurance, manufacturing, and supply‑chain teams to align priorities. Identify and drive continuous‑improvement initiatives across the PAC‑3 program. Support travel and...

Description: You will be a Senior Quality Engineer for the PAC 3 Missile and Launcher Evolutionary Development and Transition to Production team. Our team is responsible for delivering cutting edge missile and launcher solutions that meet rigorous quality and performance standards. What You Will Be Doing As a Quality Engineer you will be responsible for leading quality initiatives across the development program, partnering with engineering, manufacturing, subcontracting, program management, suppliers, and the customer to ensure quality objectives are met throughout development, testing, and transition to production. Your responsibilities will include, but are not limited to: • Developing program plans and performing Product Development Process assessments. • Implementing and tracking quality requirements and development process requirements, conducting design reviews and process assessments, reducing design and process risk, and driving closure of non conformances during...

Description: What We’re Doing: At Lockheed Martin Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training, and education. The Work: Duties will include but are not limited to: Evaluates and reviews customer requirements for C5ISRT and translates those requirements into discrete capability statements which program managers and engineers can realize. Reports findings for major marketing, distribution, and manufacturing proposals and their impact on the sales function. Participates in the central development and implementation of new products, specifically in the electronic warfare and SIGINT areas. May also participate in presales or sales meetings to review proposed plans. Functions as liaison between USG customers and program managers and engineers....

Description: You will be the Manufacturing Engineer Sr (Level 3) for the PAC-3 Munitions Acceleration team. Our team is responsible for the successful execution of a large ramp‑to‑rate effort with a heavy focus on supporting proposals, collaborating on make‑where decisions, and driving tooling from identifying the need to delivery and prove‑out. What You Will Be Doing As the Manufacturing Engineer Sr (Level 3) you will be responsible for supporting proposals and coordinating the identification, design, procurement, delivery, and prove‑out of PAC‑3 tooling. Your responsibilities will include, but are not limited to: Generate Tangible Item Lists (TILs) and labor estimates to enable make‑where and make‑split decisions Plan budgets and Integrated Master Schedule (IMS) activities, and coordinate make‑site efforts Write Tooling Action Requests (TARs), develop tooling Statements of Work (SOWs), and manage priorities for design, fabrication, and prove‑out...

Description: You will be the Manufacturing Planner Staff (Level 4) for the PAC-3 Missile Production Team. Our team owns and maintains the schedule for all PAC-3 Missile production contractual deliverables and is responsible for line‑of‑balance tracking, loading demand in ERP systems, and mitigating schedule risks. What You Will Be Doing As the Manufacturing Planner Staff (Level 4) you will be responsible for driving efforts from award to closure. Your responsibilities will include, but are not limited to: Maintain line of balance schedules to ensure program milestones are met Load and manage demand data in ERP systems to support production planning Identify and mitigate schedule risks through proactive analysis and corrective actions Coordinate with cross functional teams to align resources and resolve planning conflicts This position requires travel and/or communication to all production sites and/or vendor locations. Work outside of the normal...

Description: You will be the Manufacturing Engineer Stf (Level 4) for the THAAD Program Tooling Team. Our team is responsible for delivering world‑class missile systems through innovative manufacturing solutions. What You Will Be Doing As the Manufacturing Engineer Stf (Level 4) you will be responsible for advancing tool design and manufacturing processes that enable rapid, reliable production of the THAAD system. Your responsibilities will include, but are not limited to: Develop and refine tooling designs to meet production requirements. Provide Design‑for‑Manufacture input and transition new or revised designs from development to production. Lead manufacturing process validation activities and drive cost‑reduction initiatives to closure. Identify production risks and implement effective mitigation plans. Support earned‑value management and resolve tooling or manufacturing issues with internal and supplier teams. Why Join Us The ideal...

Description: You will be the Manufacturing Engineer (Level 3) for the THAAD Program Tooling Team. Our team is responsible for delivering world‑class missile systems through innovative manufacturing solutions. What You Will Be Doing As the Manufacturing Engineer (Level 3) you will be responsible for advancing tool design and manufacturing processes that enable rapid, reliable production of the THAAD system. Your responsibilities will include, but are not limited to: Develop and refine tooling designs to meet production requirements. Provide Design‑for‑Manufacture input and transition new or revised designs from development to production. Lead manufacturing process validation activities and drive cost‑reduction initiatives to closure. Identify production risks and implement effective mitigation plans. Support earned‑value management and resolve tooling or manufacturing issues with internal and supplier teams. Why Join Us We are looking for...

Description: You will be the Manufacturing Planner Sr (Level 3) for the Production Planning and Control team. Our team is responsible for orchestrating end‑to‑end material flow, ensuring production schedules align with demand, and driving operational excellence across the enterprise. What You Will Be Doing As the Manufacturing Planner Sr (Level 3) you will be responsible for coordinating material requirements, optimizing production schedules, and supporting cross‑functional teams to meet demand. Your responsibilities will include, but are not limited to: Develop and maintain detailed production plans that align material availability with schedule commitments. Monitor inventory levels and orchestrate material flow to prevent bottlenecks. Collaborate with supply chain, manufacturing, and quality teams to resolve planning issues. Analyze production data to identify improvement opportunities and drive operational excellence. Prepare and communicate...

Description: You will be the Manufacturing Engineer Stf (Level 4) for the THAAD Program. Our team is responsible for delivering world‑class missile systems through innovative manufacturing solutions. What You Will Be Doing As the Manufacturing Engineer Stf (Level 4) you will be responsible for advancing tool design and manufacturing processes that enable rapid, reliable production of the THAAD system. Your responsibilities will include, but are not limited to: Develop and refine tooling designs to meet production requirements. Provide Design‑for‑Manufacture input and transition new or revised designs from development to production. Lead manufacturing process validation activities and drive cost‑reduction initiatives to closure. Identify production risks and implement effective mitigation plans. Support earned‑value management and resolve tooling or manufacturing issues with internal and supplier teams. Why Join Us We are looking for a...