8 finisher a jobs found in Fort Worth

Description: Determines sequence of construction operations and plans job by preparing material lists and making working sketches of construction, scaffolding, prefabrication carpentry fixtures and frames indicating sizes, dimensions, fastening and mating points, bracing members and other details when these are necessary and not furnished, being guided by blueprints, sketches, trade practice and verbal and written instructions. Supplements by actual layout when necessary. Sets up (incidental to other work described herein) woodworking machinery such as saws, jointers, wood shapers and routers, etc., by selecting proper blade or cutting tool, setting angle of cut, and adjusting speed and guides. Performs such typical operations as the finish carpentry work of permanent structures, office partitions, panels, hardwood floors, office doors, cabinets and windows. Saws and finishes to specifications or requirement by using hand and power tools such as jointers, wood shapers,...

Description: This position is for an Industrial Engineer Sr supporting F-35 Component Final Finish (CFF). This role will be responsible for the integration of functional Industrial Engineering solutions in the F-35 CFF area in both a shop floor support and "above the floor" capacity by analyzing and developing production plans, creating and monitoring production health metrics, and continuous improvement activities. Individual will strive to enhance all production related activities through the use of automation techniques and a variety of software. Individual may have opportunities to perform as project manager. Will work closely with Industrial Engineering, Production Management, and a variety of Production support functions. Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel. May establish or assist in...

Description: Electrical Engineer - Systems Integration/Test - Level 4 We are Lockheed Martin The Electronic Hardware Design (EHD) team develops flightworthy safety critical electronic hardware, embedded software, FPGAs, and test equipment for LM Aero aircraft programs and related needs. We are a co-located team of electrical, mechanical, software, test, and project management engineers under one manager. These EHD disciplines develop requirements, produce detailed designs, qualify, document, develop test equipment for, and establish production build to print suppliers for the products it develops. Responsible for the development and verification of flightworthy safety critical electronic circuit cards, FPGAs, and related test equipment. Will work closely with embedded software engineers, mechanical engineers, specialty engineering, and test engineers integrating the software, hardware, and test stations. May also develop automated test capabilities enabling hardware and...

Description: We are Lockheed Martin What You Will Be Doing This position will report to the manager of Business Operations Team within Ground Systems in Fort Worth, Texas. This position requires an understanding of Earned Value Management processes and supporting tools as you will be responsible applying these techniques and overseeing the cost, schedule and technical execution of both F-35 and F-16 contracts, acting as a single point of accountability for labor, material and IWTA control accounts of our engineering teams and delivering insights to drive program success. Your Responsibilities will include: • Oversee the compliance and implementation of Earned Value Management principles by managing cost, schedule and technical scope and delivering associated business requirements on time • Conduct cost and schedule variance and metric analysis, define root causes and implement corrective actions to ensure project success • Prepare comprehensive EVMS presentations and...

Description: What You Will Be Doing You will be the Material Review Engineer, covering F-35 Production Operations with Material Review (MRB), will provide support for detail fabrication, sub-assembly, component assembly, and mate through delivery operations. Primary duties of this assignment include anomaly investigation, technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations, and finishes. MRB engineering candidate will be required to coordinate across a large number of functional areas and LM Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and...

Description: What You Will Be Doing The Operations Integration organization is seeking a Maintenance Trainer Sr for the Fort Worth, Factory and Field Training (F&FT), international training team. The successful candidate will possess a minimum of 5 years of experience directly working with Low Observable Finishes and Coatings on the F-35. Leading candidate must be able to deliver 5th generation aircraft coatings and finishes training, including hands on practical demonstrations, to international partners as well as Fort Worth Production and Flight Operations employees. Individual will be responsible for establishing and delivering technical training programs targeted on the installation, maintenance, repair, of aircraft coatings and finishes materials, associated specific tools and test equipment, and utilize internal company systems such as SFM, QADS, ICA, PDM, MPS’s, PS, JDL and others. Individual will review lesson plans and materials for technical instruction in...

Description: We are Lockheed Martin The story of aviation has always been the story of people who have the courage to fail, to try again and to one day succeed. Since Lockheed Martin’s inception and continuing today, the passion to advance aeronautical design and help our customers achieve mission success has been ingrained in our culture. It is that passion combined with a strategic focus on ever changing global challenges that shapes our path forward. Lockheed Martin is seeking a Manufacturing Engineer for the F-35 Program WHAT YOU WILL BE DOING This role is responsible for tooling and factory transition execution for the F-35 FACO, Fabrication, and Finishes (CFF/LFF) build areas. This role may support both domestic and international tooling projects. • Ensure tools and equipment are specified, scoped and built to meet engineering specifications and manufacturing requirements. • Responsible for developing robust Statements of Work (SOWs) when contracting suppliers to...

Description: This position is for an Industrial Engineer Staff supporting F-35 Component Final Finish (CFF). This role will be responsible for the integration of functional Industrial Engineering solutions in the F-35 CFF area in both a shop floor support and "above the floor" capacity by analyzing and developing production plans, creating and monitoring production health metrics, and continuous improvement activities. Individual will strive to enhance all production related activities through the use of automation techniques and a variety of software. Individual may have opportunities to perform as project manager. Will work closely with Industrial Engineering, Production Management, and a variety of Production support functions. What’s In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here. Do you want to be part of a...