156 test engineer jobs found in Grand Prairie

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking a Test Engineer for our Grand Prairie, TX site! You will be the Automated Test Equipment (ATE) Test Engineer for the Integrated Air and Missile Defense (IAMD) Line-of-Business, supporting Automated Electronic Test Equipment and Test Software activities in Grand Prairie, TX. Our team is responsible for ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for supporting test...

Description: We are seeking a highly experienced Senior Staff Automated Test Engineer with deep expertise in designing and integrating Automated Test Equipment (ATE) for complex electrical systems, subsystems, and circuit card assemblies (CCAs). With 12+ years of hands-on experience, you will lead the electrical design aspects of custom ATE solutions, interface with cross-functional teams (product design, manufacturing, software/test engineers), troubleshoot production issues, and drive improvements in test coverage, reliability, and efficiency. This role involves architecting robust, production-ready test solutions in high-reliability environments. Key Responsibilities: • Lead the full-cycle electrical design of custom ATE systems, including schematics, PCB layouts, cable/interconnect drawings, fixture design (“bed of nails” or flying probe), signal conditioning circuits, switching matrices, and power distribution. • Specify, select, and integrate commercial off-the-shelf...

Description: Missiles and Fire Control in Orlando, Florida an opening for an experience lead test engineer. Our team is responsible for designing, integrating, and ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for designing test consoles, interface test adapters (ITAs), test cables, and test fixtures. You will be architecting software and writing source code. You will be hands-on integrating the test system hardware, software, and device under test (DUT), then performing verification and validation of the test system. You will work with a range of technologies, including TestStand®, LabVIEW®, Matlab, and C# to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional testing. Your responsibilities will include: •Designing,...

Description: The HWIL Electrical Design & Integration Engineer (E4) provides senior level technical leadership for the end to end electrical architecture, integration, and verification of real time, closed loop Hardware in the Loop (HWIL) capabilities. With 5 + years of relevant experience, the incumbent operates with technical authority, defines strategy, and influences program wide decisions while representing Lockheed Martin to senior government and industry stakeholders. Core Responsibilities • Technical Architecture & Strategy - Define and evolve the electrical architecture for HWIL test beds, establishing standards for cable harnesses, PCBs, high speed signaling, and RF target generation simulators. • Lead the integration of next generation real time closed loop simulation models • Program Leadership - Serve as a lead HWIL electrical engineer coordinating with cross functional teams (Systems, Software, Mechanical, Integration & Test). • Present technical...

Description: Lockheed Martin Missiles and Fire control is seeking a Mid-career Systems Integration Engineer who will be supporting hardware and software integration for the PAC-3 Missile. The candidate will be involved in the verification and validation for new test sets as well as actively involved in missile testing throughout the life of the product. The candidate must have knowledge of electrical engineering in the areas of digital, analog, radio frequency circuit designs or electronic components. This position requires to travel to test sites within Continental United States (CONUS). For CONUS activities, the candidate will travel to locations such as White Sands Missile Range, NM to support flight test and production sites in Lufkin, TX and Camden, AR to support hardware troubleshooting. Travel time can be expected to be up to 10% per year, however this number can increase or decrease based on the needs of the job. What You Will Be Doing • Support PAC-3 Missile Production...

Description: The HWIL Engineer serves as a senior engineer, providing comprehensive expertise in the design, development, and implementation of real‑time, closed‑loop HWIL capabilities across multiple programs. With 3+ years of relevant experience, you will work under general direction, influence project objectives, and engage senior personnel on critical technical matters while independently delivering practical solutions to complex problems. What You Will Be Doing • Lead HWIL Integration: Oversee design, development, and implementation of real‑time, closed‑loop HWIL simulations (including Missile 6‑DOF models) for air vehicle software, firmware, and hardware. • System Testing & Validation: Integrate stimulation equipment, conduct verification & validation of systems and subsystems, and troubleshoot hardware/software failures using lab equipment (signal generators, DAQ, oscilloscopes, spectrum analyzers). • Debug & Diagnose: Resolve complex issues related to...

Description: Lockheed Martin Missiles and Fire Control in Grand Prairie, Texas is seeking a Telemetry (TM)/Flight Termination System (FTS) engineer to support development, missile integration, and flight test for an Advanced Program. What You Will Be Doing • Supporting design, fabrication, and procurement of the TM/FTS for the missile system • Support integration and qualification of the TM and FTS subsystems • Support the integration of the TM/FTS with the missile, including ground station interface and test support • Coordination with Range Safety Officers (RSO) and providing appropriate flight safety documentation to support flight tests • Support Flight Test Planning, Flight Test Readiness Reviews, Flight Readiness Checks, and Flight Tests at United States test locations Why Join Us We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin’s comprehensive benefits package here....

Description: Lockheed Martin Missiles and Fire Control in Grand Prairie, Texas is seeking a Telemetry (TM)/Flight Termination System (FTS) electronics packaging design engineer to support development, missile integration, and flight test for an Advanced Program. Responsibilities includes: • Performing electronic packaging designs for cable harnesses and test boxes for integration and test • Supporting design, fabrication, and procurement of the TM/FTS components for the missile system • Support integration and qualification of the TM and FTS subsystems • Support the integration of the TM/FTS with the missile, including ground station interface and test support • Coordination with Range Safety Officers (RSO) and providing appropriate flight safety documentation to support flight tests • Support Flight Test Planning, Flight Test Readiness Reviews, Flight Readiness Checks, and Flight Tests at United States test locations We are committed to supporting your work-life balance and...

Description: We are seeking an entry-level energetic Hardware Engineer to support the development of a COTS‑based test‑system platform that emulates tactical equipment. In this role you will design, assemble, and validate hardware using commercial off‑the‑shelf (COTS) modules while interfacing with a variety of aerospace and defense communications standards such as ARINC 429/664, CAN, RS‑232, and related signal families. You will generate and maintain accurate wiring diagrams, redline updates, and bill‑of‑materials revisions, collaborating closely with peer engineers. The position offers hands‑on experience in rapid prototyping and verification testing within a fast‑paced, high‑visibility program, providing ample opportunity for professional growth and deeper expertise in hardware architecture and integration. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must have the ability to obtain a Secret Security...

Description: You will be the Integration, Test, and Evaluation Engineer for our team, responsible for leading the integration, testing, and evaluation of complex systems. Our team is responsible for ensuring that integrated hardware meets physical, functional, and performance objectives. What You Will Be Doing This high performing individual will manage system integration, DVTs for a datalink, HWIL activities, and flight test activities on an S&T effort with the Army AvMC customer. Additionally, this individual will be the flight test lead for a cross-functional team of engineers. The ideal candidate combines strong technical depth in missile systems with demonstrated leadership experience in executing developmental integration and test activities. The IT&E Lead will serve as the primary technical authority for system readiness and will interface directly with Program Management, Chief Engineering, Government Ranges and Government Stakeholders. Prior missile...

Description: You will be the Integration, Test, and Evaluation Engineer for our team, responsible for leading the integration, testing, and evaluation of complex systems. Our team is responsible for ensuring that integrated hardware meets physical, functional, and performance objectives. What You Will Be Doing As the Integration, Test, and Evaluation Engineer, you will be responsible for generating test procedures and plans, preparing test readiness review packages, integrating a development effort, and executing qualification testing. You will also write qualification test reports and support subcomponent and subassembly integration, as well as the build of subassembly hardware and test equipment. Your responsibilities will include: • Generating test procedures and plans • Preparing test readiness review packages • Executing qualification testing • Writing qualification test reports • Supporting subcomponent and subassembly integration • Supporting the build of subassembly...

Description: Seeking a Design Requirements and Analysis Engineer to be responsible for the generation and verification of system and subsystem level requirements. What You Will Be Doing Responsibilities include... - Performing requirements analysis, executing trade studies, establishing requirements traceability/flow down, preparing specifications, and managing requirements using the DOORS requirement database. - MBSE principles shall be applied. - Cameo models shall be generated. - Interfacing with customers, suppliers, and IPT leads. - Written and verbal Communications skills are essential. Requirements definition, DOORS (or requirements management), Cameo modeling, and MSOffice suite experience are required. - Analysis prowess (MATLAB/Excel), critical thinking and familiarity with aerospace product development processes are required. Why Join Us We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling...

Description: You will be the Materials & Processes Engineer for the Advanced Structures & Systems team. Our team pioneers the development and implementation of cutting edge materials, surface treatments, and fabrication processes that enable high performance aerospace structures across major production programs. What You Will Be Doing As the Materials & Processes Engineer you will be responsible for driving material through production. You’ll apply chemistry, physics, and material behavior expertise to create robust specifications, fabrication methods, and assembly processes while partnering closely with product development, analysis, and production operations. Your responsibilities will include: • Developing and optimizing materials and surface treatment solutions for engineering applications. • Performing failure analyses, life prediction modeling, and material property development to support reliability goals. • Authoring clear technical documentation and...

Description: You will be the Embedded Software Engineer for the Embedded Software team. Our team is responsible for designing, developing, and maintaining embedded C/C++ software that powers critical missile and fire‑control systems. What You Will Be Doing As the Embedded Software Engineer you will be responsible for delivering high‑quality embedded solutions that meet demanding mission requirements. Your responsibilities will include, but are not limited to: Develop and integrate embedded software components and algorithms into C/C++ applications. Plan, conduct, and coordinate software development activities across the product lifecycle. Design, document, test, and debug software that implements logical and mathematical solutions for mission‑critical problems. Apply deep knowledge of computer hardware and system architecture to create robust, performant code. Identify and correct program errors, produce operating instructions, and maintain comprehensive...

Description: You will be the Embedded Software Engineer for the Embedded Software team. Our team is responsible for designing, developing, and maintaining embedded C/C++ software that powers critical missile and fire‑control systems. What You Will Be Doing As the Embedded Software Engineer you will be responsible for delivering high‑quality embedded solutions that meet demanding mission requirements. Your responsibilities will include, but are not limited to: Develop and integrate embedded software components and algorithms into C/C++ applications. Plan, conduct, and coordinate software development activities across the product lifecycle. Design, document, test, and debug software that implements logical and mathematical solutions for mission‑critical problems. Apply deep knowledge of computer hardware and system architecture to create robust, performant code. Identify and correct program errors, produce operating instructions, and maintain comprehensive development...

Description: You will be the Tool Planner / Manufacturing Engineer (Level 2) for the Tool Planning & Manufacturing Engineering Team. Our team is responsible for planning, execution, and continuous improvement of tooling assets across multiple programs. What You Will Be Doing As the Tool Planner / Manufacturing Engineer (Level 2) you will be responsible for translating engineering intent into actionable work‑instructions, embedding inspection and test requirements, and managing tooling data flow in PLM, ERP, and MES systems. Your responsibilities will include, but are not limited to: Develop detailed operation sequences and standard procedures for tool and equipment fabrication. Embed inspection, test, and verification steps into each production plan. Coordinate buy planning and procurement activities for tooling assets. Partner with engineering, manufacturing, and Global Supply Chain to ensure design intent is reflected. Provide data‑driven...

Description: You will be the ElectroMechanical Engineer Lead for the Integrated Fires Protection Capability 2 Interceptor (IFPC 2) program. Our team designs, builds, and tests next generation interceptors for the Integrated Air and Missile Defense (IAMD) portfolio, delivering critical capabilities to protect our nation and allies. What You Will Be Doing As the ElectroMechanical Engineer Lead you will package new circuit cards, rigid flex assemblies, and round wire harness bundles for both the interceptor and its Mission Critical Interface (MIC). You will partner with procurement, model shop, and external vendors to ensure every electronic assembly is built to exacting standards and delivered on schedule. Your responsibilities will include: • Generating system interconnect diagrams in Zuken and creating model based harness designs. • Producing detailed mechanical layouts, drawings, and Bills of Materials that specify materials, components, and manufacturing processes. •...

Description: You will be the Quality Engineer for the Quality Engineering Team. Our team is responsible for establishing and maintaining quality systems, supporting Australian partners, and ensuring compliance with quality standards. What You Will Be Doing As the Quality Engineer you will be responsible for driving quality excellence across our programs and supplier network. Your responsibilities will include, but are not limited to: Set up new quality processes and resolve issues with suppliers and manufacturing teams. Extract and analyze data to identify trends and drive continuous improvement. Support Integrated Product Teams with quality data reviews and analysis. Lead corrective‑action meetings and program parts reviews. Conduct assessments and audits to ensure compliance with quality standards. Why Join Us The ideal candidate is a collaborative problem‑solver who thrives in a fast‑paced environment and is passionate about delivering...

Description: You will be the Quality Engineer Sr for the Quality Engineering Team. Our team is responsible for ensuring product quality, driving continuous improvement, and supporting supplier quality across Lockheed Martin production sites. What You Will Be Doing As the Quality Engineer Sr you will be responsible for leading quality initiatives that enhance production floor performance and supplier compliance. Your responsibilities will include, but are not limited to: - Collaborate with manufacturing sites to establish new processes and enforce contractual requirements. - Extract and analyze MRP data to generate actionable quality metrics and trend reports. - Lead corrective and preventive action initiatives, including parts reviews and material review boards. - Conduct audits and assessments to ensure compliance with ISO‑9001/AS9100 and engineering specifications. - Drive lean improvements to reduce waste and enhance production velocity. Why Join Us The ideal candidate...

Description: At Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. This is a place for engineers, scientists, and problem-solvers who are ready to engage deeply, think critically, and build with purpose. You will not just launch a career. You will be part of something bigger. This is where the best are built. Lockheed Martin is seeking a Quality Engineer (QE) Associate for a position based in Grand Prairie, TX. The position develops mechanical engineering experience, producing and reviewing quality standards, methods, work instructions and procedures for the inspection of...