9 ground system engineer jobs found in Greenville

Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team as an F-16 Field Service Engineer (FSE) to support the Argentina Air Force (FAA) at Rio Cuarto Air Base, Cordoba Province, Argentina. Note: This position is located in Argentina and is an accompanied assignment - employee +1. This position will provide on-site advice, liaison, and informal training in the installation, operation and maintenance of equipment and systems related to F-16 on and off the aircraft. The objective of the FSE is to elevate the technical skill and abilities of the personnel responsible for the operation and maintenance of F-16 aircraft and associated equipment/systems to a level of self-sufficiency. What You Will Be Doing Specific tasks include but are not limited to the following: • Provide on-site/on-equipment informal unit training to the component level on installation, maintenance and operating techniques pertaining to the adjustment, calibration,...

Description: Join the Lockheed Martin Aeronautics Company as an Aircraft Field Service Engineer (FSE) on our Aeronautics Field Sustainment team! This position will support the Finnish Air Force at Rovaniemi AB, Finland. As a Nose to Tail (NTT) FSE, the preferred candidate will be a subject Matter Expert(SME) in Supportable Low Observable (SLO)/Structures. It is desired the individual also be an emerging authority in APG/Vehicle Systems (VS) and Avionics/Mission Systems (MS), with the skill set to accomplish troubleshooting and analysis of VS, MS, or SLO. The candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment Team's technical interface to the on-site Customer (both Operations and Maintenance) in resolving issues arising from maintenance and modification activities for all matters dealing with the F-35 aircraft. What You Will Be Doing Responsibilities include: •Accomplish troubleshooting and analysis of difficulties experienced in the field. •...

Description: Join the Lockheed Martin Aeronautics Company as an Aircraft Field Service Engineer (FSE) on our Aeronautics Field Sustainment team! This position will support the Finnish Air Force at Rovaniemi AB, Finland. As a Nose to Tail (NTT) FSE, the preferred candidate will be a subject Matter Expert(SME) in Supportable Low Observable (SLO)/Structures. It is desired the individual also be an emerging authority in APG/Vehicle Systems (VS) and Avionics/Mission Systems (MS), with the skill set to accomplish troubleshooting and analysis of VS, MS, or SLO. The candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment Team's technical interface to the on-site Customer (both Operations and Maintenance) in resolving issues arising from maintenance and modification activities for all matters dealing with the F-35 aircraft. What You Will Be Doing Responsibilities include: •Accomplish troubleshooting and analysis of difficulties experienced in the field. •...

Description: Liaison Engineer Stf - Level 4 Location: Greenville SC What You Will Be Doing As a Liaison Engineer supporting the sustainment engineering team in Greenville, SC, you will play a critical role in supporting F-16 and C-130 MMRO (Maintenance, Modification, Repair, and Overhaul) activities. You will serve as a key link between engineering, production, and customer teams, ensuring timely and effective resolution of technical issues to support aircraft delivery schedules. In this role, you will provide hands-on engineering support for aircraft modifications, working closely with Aircraft Technicians on the production floor to address real-time challenges. You will review and validate planning work instructions, evaluate aircraft damage discrepancies, and research repair solutions using USAF and NAVAIR Technical Orders (TOs). You will collaborate with customers and OEM design engineering teams to coordinate repair authorizations and develop compliant repair...

Description: You will be the Production Hangar APG, F-16 Technician for the Lockheed Martin Greenville Production Team. What You Will Be Doing As the Production Hangar APG, F-16 Technician you will be responsible for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. The Production Hangar APG, F-16 Technician will also need to be knowledgeable in aircraft systems operation and maintenance to include: • Landing gear • Powerplants • Flight controls • Rigging • Aircraft movement. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. • Frequently lift and/or push or pull up to 25...

Description: You will be the FACO Production Avionics, F-16 Technician Lvl 2 for the Lockheed Martin Greenville Production Final Assembly and Checkout Team. Our team is responsible for Final Assembly and Checkout functions to include installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. What You Will Be Doing As the FACO Production Avionics, F-16 Technician Lvl 2 you will be responsible for Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or...

Description: You will be the FACO Production Avionics, F-16 Technician Lvl 3 for the Lockheed Martin Greenville Production Final Assembly and Checkout Team. Our team is responsible for Final Assembly and Checkout functions to include installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. What You Will Be Doing As the FACO Production Avionics, F-16 Technician Lvl 3 you will be responsible for Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel,...

Description: You will be the Sustainment APG, F-16 Mechanic Level 2- Second Shift for the Lockheed Martin Greenville Sustainment Team. What You Will Be Doing As the Sustainment APG, F-16 Mechanic Level 2 you will be responsible for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. The Sustainment APG, F-16 Mechanic Level 2 will also need to be knowledgeable in aircraft systems operation and maintenance to include: • Landing gear • Powerplants • Flight controls • Rigging • Aircraft movement. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. • Frequently lift and/or push or...

Description: You will be the Sustainment Avionics, F-16 Technician Level 2- Second shift for the Lockheed Martin Greenville Sustainment Team. Our team is responsible for Flight test/Depo functions to include installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. What You Will Be Doing As the Sustainment Avionics, F-16 Technician Level 2 you will be responsible for Flight test Mods, testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks to ensure flight readiness. You may also be required to troubleshoot and repairing electrical and avionics systems based on area team. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle,...