14 energy jobs found in Greenville

Command Investigations, LLC is looking for Surveillance Investigators to become part of a dynamic team. This is a great opportunity for individuals with prior investigative experience who demonstrate integrity, independence, and a drive to succeed in a fast-paced investigative environment. Why You Will Love Working with Command Investigations, LLC? At Command Investigations, we are invested in YOU! We know, together, we can Lead with Excellence to provide top tier Service with Integrity that drives Results! Pay: $20-$25 per hour (depending on state) Schedule: This is not a 9-5 job. Days of the week vary, and weekends, overtime, and Holidays are typically required. Start times may be as early as 3:00-4:00 AM depending on case requirements but are typically 6:00 AM. 8-hour shifts are typical but can range up to 12-16 hours.  NOTE: Due to the nature of this role, there is no guarantee of hours or case assignments; however, we pride ourselves on...

Command Investigations, LLC is looking for Surveillance Investigators to become part of a dynamic team. This is a great opportunity for individuals with prior investigative experience who demonstrate integrity, independence, and a drive to succeed in a fast-paced investigative environment. Why You Will Love Working with Command Investigations, LLC? At Command Investigations, we are invested in YOU! We know, together, we can Lead with Excellence to provide top tier Service with Integrity that drives Results! Pay: $25-$30 per hour (depending on state) Schedule: This is not a standard 9-5 role. Workdays and hours vary based on business needs and there is no set or recurring schedule. Weekends, overtime, and holidays are typically required. Start times may be as early as 3:00 AM but 6:00 AM is common. Standard shifts are 8 hours but may extend up to 16 hours as needed. NOTE: Due to the nature of this role, there is no guarantee of hours or case assignments;...

Description: You will be a Calibration Technician supporting our Lockheed Martin Greenville Site. Our team is responsible for performing calibration and adjustments on Test Measurement and Diagnostic Equipment (TMDE).such as, but not limited to: oscilloscopes, signal generators, multi-meters, power supplies, frequency counters, spectrum analyzers, digital voltmeters, AC/DC Standards, power meters & sensors, digital multimeters, and electrical test sets, physical/dimensional equipment and hand tools. What You Will Be Doing The Calibration Technician will Use calibration procedures, manufacturers’ manuals and specifications and data sheets to accomplish work. Candidate must have a thorough knowledge of calibration lab safety, be a team player, and be quality minded. Candidate must be able to periodically lift and carry in excess of 50 lbs. What’s In It For You: 3 day weekends every weekend! Candidate must be able to work a 4x10B Tue -Fri From onsite to remote, we...

Description: You will be the Flight Line Operations Supervisor - Level 3 for the Flight Line Operations team which is responsible for maintaining and servicing legacy aircraft on the flight line. What You Will Be Doing As the Flight Line Operations Supervisor - Level 3 you will be responsible for leading a skilled workforce that ensures safe, efficient, and high‑quality flight‑line activities. Your responsibilities will include: Supervise aircraft manufacturing and maintenance areas, enforcing safety standards, regulatory requirements, and company policies. Set priorities and allocate resources to meet production schedules while controlling cost and maintaining quality. Provide leadership and guidance to Flight Line technicians, conduct performance evaluations, and foster a culture of teamwork and high performance. Oversee employee training programs and ensure compliance with all policies, procedures, and ethical standards. Act as the primary...

Description: You will be the F-16 Build Team, Production Lead - First Shift. In addition to standard job description tasks, the Production Lead will be responsible for providing status of work documents and work accomplished in their work area. What You Will Be Doing The F-16 Production Lead will be required to interface with multiple functional organizations, in addition to the area supervisor and crew to resolve issues or constraints in the aircraft assembly/production environment. The candidate will be the intermediary between the aircraft assembly crew and production supervision and provide technical guidance to the crew for the assembly of aircraft components. In this capacity the lead will status, communicate and support production goals and objectives of the day/week, assess skill and complexity of tasks, issue work assignments, establish nominal expectation of tasks by obtaining personal contract for each task period of performance with each of the employees; set,...

Description: You will be the Production Flightline Avionics, F-16 Technician Lvl 3 for the Lockheed Martin Greenville Production Flightline Team. Our team is responsible for Final flight ops and delivery to include flight operations, installs of electrical harnesses/wires, continuity testing, System testing, and soldering/termination operations. ~This Position will be Thurs-Sun 4x10D weekend schedule- 1st shift 5:30a- 4pm~ What You Will Be Doing As the Production Flightline Avionics, F-16 Technician Lvl 3 you will be responsible for Flight Operations, Launch and Recovery, Testing/installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend...

Description: You will be the Production Flightline APG, F-16 Technician Level 3 for the Lockheed Martin Greenville Production Team. Our team is responsible for Flightline maintenance and delivery of F-16 aircraft to our customers. ~This Position will be Thurs-Sun 4x10D weekend schedule- 1st shift 5:30a- 4pm~ What You Will Be Doing As the Production Flightline APG, F-16 Technician Level 3 you will be responsible for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. The Production Flightline APG, F-16 Technician Level 2 will also need to be knowledgeable in aircraft systems operation and maintenance to include: • Landing gear • Powerplants • Flight controls • Fueling/Defueling • Aircraft movement/Launch & Recovery The candidate will be required to: • Comprehend documents such as safety rules, operating l be required to be a member of the...

Description: You will be the Material Handler for the Warehouse. Our team is responsible for supplying build material and hardware to support F-16 production and/or sustainment operations. What You Will Be Doing As the Material Handler you will be responsible for but not limited to the following tasks: - Performing warehouse receiving, put away, picking or delivery operations for required material to support production and sustainment operations. - Performing required cycle counts of material and help maintain inventory accuracy. - Must have a valid State issued Driver’s License. - Must be able to stand and walk during the majority of work shift. - Must be able to operate warehouse machinery, to include Order Picker, Fork Lift, Reach Truck - Must be able to lift up to 25 lbs occasionally. - Must maintain clean work environment and required cleanup at end of shift. - Assists with other duties as required by Warehouse Leadership Team. What’s In It For You: 3 day...

Description: You will be the Production FACO APG, F-16 Technician Level 2 for the Lockheed Martin Greenville Production Team. Our team is responsible for Final assembly check out maintenance and delivery of F-16 aircraft to our customers. What You Will Be Doing As the Production FACO APG, F-16 Technician Level 2 you will be responsible for Inspecting, troubleshooting, repairing, overhauling and modifying aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. The Production FACO APG, F-16 Technician Level 2 will also need to be knowledgeable in aircraft systems operation and maintenance to include: • Landing gear • Powerplants • Flight controls • Fueling/Defueling • Aircraft movement/Launch & Recovery *Must be a US Citizen with Ability to obtain a secret clearance. Mission essential functions and other duties may be assigned as required. Specific vision abilities required by this job include close vision,...

Description: Manufacturing Planner- Junior Level Location: Greenville SC What You Will Be Doing Are you a detail-oriented professional with a knack for optimizing production processes? We are seeking a Manufacturing Planner in Greenville, SC, to oversee the management of production and non-production parts and commodities, ensuring smooth and efficient operations. Key Responsibilities - Oversee and manage the production and non-production parts and commodities assigned to ensure efficient use and inventory control - Enter and maintain Material Requirements Planning (MRP) parameters into SAP, including updating material master data to support accurate planning and scheduling - Evaluate order signals for both dependent and independent requirements to maintain appropriate inventory levels and ensure material availability - Review and resolve discrepancies and exceptions in orders, implementing corrective actions as necessary to maintain smooth operations - Release...

Description: You will be the MOD Hangar Avionics, C-130 Technician for the Lockheed Martin Greenville Sustainment Team. Our team is responsible for Modification installs of electrical harnesses/wires, continuity testing, and soldering/term operations. What You Will Be Doing As the MOD Hangar Avionics, C-130 Technician you will be responsible for installing electrical harnesses/components, routing various wire/cables, Terminating cables/wires, and performing operational checks. You may also be required to troubleshoot and repairing electrical and avionics systems based on area assigned. Will sometimes perform other duties such as general mechanic installs, testing, and inspections. The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. • Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work...

Description: You will be the C-130 MOD Sheet Metal Technician LVL 3 for the Lockheed Martin Greenville Sustainment Team. Our team is responsible for Sustainment structural MOD, repair, and delivery of C-130 aircraft to our customers. What You Will Be Doing As the C-130 MOD Sheet Metal Technician LVL 3, you will be responsible for interpreting blueprints, lays out, fabricates, installs and repairs various sheet metal utilizing precision measuring equipment. The C-130 MOD Sheet Metal Technician will also need to be knowledgeable in aircraft structural repair operation, modifications, and maintenance to include: • Precision Drilling/Reaming • Riveting/installation of various fasteners • Structural Modiciations/Fabrication • Blueprint Reading/Engineering Drawing The candidate will be required to: • Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. • Use hands to grasp, handle, and/or feel, reach with hands and arms, talk,...

Description: You will be the F-16 Build Team, Production Lead - Second Shift. In addition to standard job description tasks, the Production Lead will be responsible for providing status of work documents and work accomplished in their work area. What You Will Be Doing The F-16 Production Lead will be required to interface with multiple functional organizations, in addition to the area supervisor and crew to resolve issues or constraints in the aircraft assembly/production environment. The candidate will be the intermediary between the aircraft assembly crew and production supervision and provide technical guidance to the crew for the assembly of aircraft components. In this capacity the lead will status, communicate and support production goals and objectives of the day/week, assess skill and complexity of tasks, issue work assignments, establish nominal expectation of tasks by obtaining personal contract for each task period of performance with each of the employees;...

Description: You will be the F-16 Build Team, Production Lead - Second Shift. In addition to standard job description tasks, the Production Lead will be responsible for providing status of work documents and work accomplished in their work area. What You Will Be Doing The F-16 Production Lead will be required to interface with multiple functional organizations, in addition to the area supervisor and crew to resolve issues or constraints in the aircraft assembly/production environment. The candidate will be the intermediary between the aircraft assembly crew and production supervision and provide technical guidance to the crew for the assembly of aircraft components. In this capacity the lead will status, communicate and support production goals and objectives of the day/week, assess skill and complexity of tasks, issue work assignments, establish nominal expectation of tasks by obtaining personal contract for each task period of performance with each of the employees;...