23 aircraft mechanic jobs found in Marietta

Description: You will be the Aircraft Electrical & Electronics Mechanic - C130 for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - C130, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and overall...

Description: You will be the Aircraft Electrical & Electronics Mechanic - Fabrication for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - Fabrication, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and...

Description: This occupation performs the scope of complete aircraft assembly at all stages of production prior to flight line operations. An employee in this position may perform a wide variety of operations across multiple skill sets with highly concurrent assembly of aircraft structures, systems installations, and verifications. This occupation requires performing the complete assembly, installation, and integral mating of structural components, sub-assemblies, and assemblies. This includes rework, repair, and incorporation of design changes during major component assembly, mate, and final assembly. Works from detail, assembly, and installation blueprints, production illustrations, 3D models, planning, or other authorized documents. Works with authorized personnel as necessary to determine satisfactory assembly and installation sequence and to build completely the subassemblies and assemblies accordingly. Points out need for tooling, parts, or assembly corrections as needed....

Description: You will be the Fabrication-Heat Treat Mechanic for the team which is responsible for heat treating and age hardening and testing of steel, and aluminum production parts and their alloys, rivets, steel tooling parts and stock. What You Will Be Doing As the Fabrication-Heat Treat Mechanic, you will be responsible for determining the heat treat process and quenching required to obtain results, and determining proper timing and temperature of ovens, salt baths according to material composition, shape, size and thickness. Your responsibilities will include: Heat treating production steel and aluminum parts, tooling parts, dies and stock made from steel or steel alloys Operating hand or power equipment to change furnace or bath and quenching, and checking and maintaining heat treat solutions Operating age hardening ovens by checking orders for correct material and preceding heat treat, and setting controls for proper heat and time according to...

Description: You will be the Production Assembler C130 for the team which is responsible for using jigs, fixtures, rivet‑upsetting equipment, and hand tools to assemble aircraft components. What You Will Be Doing As the Production Assembler C130, you will be responsible for reading and interpreting detail, assembly, and installation blueprints or other authorized documents to obtain assembly and installation information and material callouts. Your responsibilities will include: Setting up and using jigs and fixtures to ensure precise part alignment Operating rivet‑upsetting and bench‑assembly equipment to secure fasteners Applying rules, squares, protractors, and dividers to verify geometry and dimensions Performing arithmetic, including decimals and fractions, to calculate material requirements and tolerances Working to exacting tolerances required for each assembly operation What’s In It For You We are committed to supporting your...

Description: You will be the Assembly Worker Structures Sr - C130 for the team which is responsible for laying out and locating structural components or assemblies in making production assemblies as specified by design changes. What You Will Be Doing As the Assembly Worker Structures Sr - C130, you will be responsible for performing difficult structural pick-up and/or rework such as removing, replacing, or realigning ribs, bulkheads, stringers, or fittings in completed skinned assemblies. Your responsibilities will include: Working structural changes which materially alter previous assembly references and practice Performing trimming, reforming, and altering parts and structures as required Fabricating detail parts such as shims, splices, gussets, angles, brackets, doublers, stiffeners, and patches Performing portable milling operations on wing and center section attaching joints Improvising shop aids to facilitate assembly and installation as...

Description: You will be the Flight Line Test Mechanic C-130 for the team which is responsible for performing the servicing and troubleshooting of complex aircraft systems. What You Will Be Doing As the Flight Line Test Mechanic C-130, you will be responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service aircraft structures, hydraulic and plumbing, rigging, and mechanical systems, and power plants requiring ingenuity in deviating from standard practices and in adapting and altering structures and systems configurations to meet special requirements. Your responsibilities will include: Making changes and replacements to hydraulic, plumbing, and rigging systems, fuel and oil units, power plants, etc. Making any permissible adjustments to ship's systems in order that they meet flight line requirements Mocking-up, fabricating, and installing new parts, structures, and systems and performing final flight...

Description: You will be the Production Assembler - Chattahoochee Tech Training Program for the team which is responsible for assembling fabricated and purchased parts into detail structural and mechanical assemblies. What You Will Be Doing As the Production Assembler - Chattahoochee Tech Training Program, you will be responsible for assembling parts into detail assemblies where all locating information is established by tooling. Your responsibilities will include: Pressing in bushings or bearings, jig drilling and riveting splines or clevises to shafts, torque tubes, or push-pull rods Trimming, fitting, and burring detail parts such as stringers, minor spars, ribs, stiffeners, brackets, and clips prior to assembly Installing parts such as plate nuts, gang nuts, brackets, fittings, and gussets Assembling and temporarily fastening detail parts together in predetermined sequence for subsequent joining operations such as spot welding, riveting, or bolting...

Description: The story of aviation has always been the story of people who have the perseverance to fail, to try again and to one day succeed. Since Lockheed Martin’s inception and continuing today, the passion to advance aeronautical design and help our customers achieve mission results has been ingrained in our culture. It is that passion combined with a strategic focus on ever changing global opportunities that shapes our path forward. What You Will Be Doing Initiate Pre-Planning Analysis and detailed Engineering or Manufacturing pre-plans to support the procurement, manufacture and installation of F-35 aircraft components. • Responsible for review and acceptance of new or revised Engineering drawings to ensure compatibility with drafting procedures and producibility of part requirements in accordance with established manufacturing procedures. • Provide technical assistance to hourly Tool Planners involved in analyzing Engineering requirements and development/initiation...

Description: You will be the C-130 Final Assembly Manager - Level 5 for the Final Assembly, Trim, Engine Shop and Component Paint team which is responsible for delivering high‑quality C130J aircraft. What You Will Be Doing As the C-130 Final Assembly Manager - Level 5 you will be responsible for leading culture, safety, FOD, quality, cost and schedule obligations for a 130‑person team on the C130J program. Your responsibilities will include: Drive a safety‑first culture and enforce FOD‑control standards. Ensure product quality meets stringent aerospace requirements. Manage cost performance and drive continuous improvement. Maintain schedule fidelity and mitigate delivery risks. Mentor and develop both salaried staff and artisans/mechanics. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin’s comprehensive benefits...

Description: Environmental Control Systems Engineer - Level 2 At Lockheed Martin Aeronautics, we're taking innovation to the next level. From designing the most advanced air vehicle to designing aircraft that defies gravity, our engineers live on the cutting edge of technology. Never have the opportunities for a technical career been so limitless. We are Lockheed Martin This position is for an experienced Engineering within the AMMM Utility Systems team. This candidate will primarily function as an Environmental Control Systems (ECS) engineer on AMMM line of business platforms, including C-130 and C-5. Job functions shall include troubleshooting, production and sustainment support, and operational improvement of aircraft Air Conditioning, Ice & Rain Protection, and Pneumatic Systems including Engine Bleed Air. The selected candidate will drive production and sustainment solutions including design improvements, software improvements, drawing changes, data review, drafting...

Description: We are Lockheed Martin We are seeking a highly experienced Principal Project Engineer to lead and manage C130 new development and modernization efforts. You will function as part of the AMMM Project Engineering team responsible for delivering complex system development products and solutions. What You Will Be Doing As a Principal Project Engineer Manager your responsibilities will include: • Be the technical leader solving new development opportunities or modernized solutions of an integrated and complex system/technical development from concept, through design, implementation, test, manufacturing/deployment and sustainment. • Ensure alignment with Engineering and Technology strategy, business development, program architect, technical feasibility. • Drive planning, technical performance measures, trade studies, risk evaluations, across all Engineering Teams to meet contract cost, schedule, and technical requirements. Lead and manage engineering teams to...

Description: You will be a technical staff member for laboratory software development within the LM Aero Simulation and System Lab (SSL) F22 MITL Team. This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft. What You Will Be Doing As a Software Engineer Senior Staff, you will serve as the software lead for the F-22 Air Combat Simulation (ACS) Man in the Loop (MITL) development team which is responsible for developing and integrating new features into the simulation, sustaining the product, and rehosting the Operational Flight Program for Linux environments. The ACS serves as the Digital Twin for the F22 aircraft and supports pilot training, tactics development, and DT/OT testing including DevSecOps support in the Raptor Virtual Development Lab (RVDL). Your responsibilities will include:...

Description: You will be the Flight Line Supervisor - Level 3 for the Flight Line Operations team which is responsible for leading represented mechanics and avionics technicians in systems testing, ground checks, and flight operations. What You Will Be Doing As the Flight Line Supervisor - Level 3 you will be responsible for overseeing crew performance, maintaining safety standards, and ensuring on‑time, high‑quality flight‑line execution. Your responsibilities will include: Supervise crews of mechanics and avionics technicians, assigning work to meet tactical and strategic goals. Ensure tasks are completed on schedule and within budget while reviewing work for quality and efficiency. Maintain a clean, organized work area and enforce “Clean As You Go” tool‑control practices. Conduct safety audits, identify risks, and implement mitigating actions in partnership with Flight Line Operations leadership. Manage training records, address certification...

Description: We are Lockheed Martin This position will work in Quality Control in Marietta, GA, to support all aspects of the C-130J build cycle to include assembly, structural repairs on sub or major assemblies, and functional checks. • This position is responsible for ensuring QA policies, procedures, and practices are followed and executed correctly to company and regulatory standards • Initiates, reviews, analyzes, and reports on quality-related data/metrics from production, service, supplier, or process improvement activities and analyzes using statistical techniques • Interfaces as needed with manufacturing, engineering, customer, vendor, and subcontractor representatives to ensure process requirements are met • Facilitate customer presentations for Mandatory Government Inspections (MGI) and/or Safety of Flight activities (SOF) • Conduct surveillance audits for compliance to the C-130 Quality Management System • Responsible for developing and coordinating defect...

Description: You will be the Chief Manufacturing Engineer - Producibility Owner - Level 6 for the Production Engineering team which is responsible for establishing and advancing producibility across the AMMM portfolio. What You Will Be Doing As the Chief Manufacturing Engineer - Producibility Owner - Level 6 you will be responsible for defining the Producibility Program, guiding design‑for‑manufacturability, and leading change‑control activities that enable high‑rate production. Your responsibilities will include: Establish and drive the Producibility Program, integrating shaping, deployment, and design‑for‑manufacturability with Design and Quality Engineering. Lead the Manufacturing Change Control Board (MCCB) as chair, overseeing configuration control and change‑management for all tooling and process updates. Partner with OpsTech to identify and implement technology‑integration opportunities that enhance producibility. Serve as the primary liaison...

Description: You will be the Chief Tool Engineer - Digitization Owner - Level 6 for the Production Engineering team which is responsible for advancing tool‑digitization and innovative tooling solutions across the AMMM portfolio. What You Will Be Doing As the Chief Tool Engineer - Digitization Owner - Level 6 you will be responsible for leading tool‑digitization initiatives, driving cost‑effective tooling designs, and coordinating cross‑functional teams to ensure production success. Your responsibilities will include: Serve as the Tool Digitization Owner, establishing strategy and overseeing implementation across Production Engineering. Lead development of innovative tooling solutions that reduce span, cost, and cycle time while applying cutting‑edge design principles. Chair the Manufacturing Change Control Board (MCCB) and manage configuration control for all tooling assets. Partner with the Chief Manufacturing Engineer to integrate tool design into...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: You will be the Flight Line Electrician - C130 for the team which is responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service complex aircraft electrical systems equipment. What You Will Be Doing As the Flight Line Electrician - C130, you will be responsible for mocking up, fabricating, and installing experimental systems and equipment and performing final flight-servicing, troubleshooting, and operational checkout before and after flight to ensure airworthiness and conformance to applicable design specifications. Your responsibilities will include: Conducting power plant runs or working with mechanics in conducting such runs; making adjustments and replacements of electrical components and accessories Investigating any malfunctioning of electrical equipment before and after flight test; analyzing systems and diagnosing trouble Performing necessary operations to correct trouble,...

Description: You will be the Propulsion Integration Engineer for the propulsion sustainment team which is responsible for... What You Will Be Doing As the Propulsion Integration Engineer you will be responsible for providing engineering support to keep C‑130 propulsion systems operating reliably in sustainment, flight‑line, and production environments. Your responsibilities will include: Analyze flight data to identify root‑cause issues and develop corrective actions (RCCA). Collaborate with suppliers and customers to resolve production and fleet‑related propulsion problems. Develop Basis of Estimates and Statement of Works for engineering proposal efforts. Support flight‑line operations and production‑line activities to ensure continuous system availability. Document technical findings and communicate recommendations to program leadership. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being,...