11 electronics jobs found in Marietta

Description: This occupation performs the scope of complete aircraft assembly at all stages of production prior to flight line operations. An employee in this position may perform a wide variety of operations across multiple skill sets with highly concurrent assembly of aircraft structures, systems installations, and verifications. This occupation requires performing the complete assembly, installation, and integral mating of structural components, sub-assemblies, and assemblies. This includes rework, repair, and incorporation of design changes during major component assembly, mate, and final assembly. Works from detail, assembly, and installation blueprints, production illustrations, 3D models, planning, or other authorized documents. Works with authorized personnel as necessary to determine satisfactory assembly and installation sequence and to build completely the subassemblies and assemblies accordingly. Points out need for tooling, parts, or assembly corrections as needed....

Description: You will be the Aircraft Electrical & Electronics Mechanic - C130 for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - C130, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and overall...

Description: You will be the Aircraft Electrical & Electronics Mechanic - Fabrication for the team which is responsible for installing preassembled wiring harnesses in conformance with predetermined routing and fastening in place with clips, brackets, and other holding devices. What You Will Be Doing As the Aircraft Electrical & Electronics Mechanic - Fabrication, you will be responsible for hooking up wiring to equipment, panels, relays, and accessories, and making continuity checks on primary installations. Your responsibilities will include: Installing preassembled wiring harnesses in conformance with predetermined routing Hooking up wiring to equipment, panels, relays, and accessories Making continuity checks on primary installations Routing wire on an electrical wiring board – pin and plug process Stripping, crimping, terminating, and soldering wire What’s In It For You We are committed to supporting your work-life balance and...

Description: You will be the Industrial Electronics/Electrical Technician for the team which is responsible for installing, maintaining, overhauling, rebuilding, modifying, and repairing industrial electrical systems and equipment. What You Will Be Doing As the Industrial Electronics/Electrical Technician, you will be responsible for troubleshooting integrally related hydraulic, mechanical, and electronic control systems to isolate malfunctions in electronic controls and servo systems. Your responsibilities will include: Troubleshooting and repairing electronic control systems, including computer numerical controls, programmable controllers, and micro-processors Disassembling, repairing, or replacing defective components and making exacting coordinated adjustments as necessary to maintain control performance and overall machine efficiency Installing, maintaining, and repairing industrial electrical motors, transformer banks, transformers, welding...

Description: You will be the Components Engineer for the Advanced Data Governance Team which is responsible for... What You Will Be Doing As the Components Engineer you will be responsible for driving the digital transformation of standard parts data, processes, and models while ensuring data quality, security, and compliance. Your responsibilities will include: Support Aeronautics digital transformation efforts related to standard parts data, processes, and models. Maintain high‑quality data standards, security protocols, and compliance with industry regulations. Develop and maintain technical documentation of data systems and architectures. Coordinate cross‑functional activities with Design Process Integration and CAD/CAM teams. Champion data governance practices to improve data integrity and accessibility. What’s In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn...

Description: You will be the Electromagnetic Environmental Effects (E3) Engineer Senior for the Aeronautics team which is responsible for advancing cutting‑edge aircraft technologies. What You Will Be Doing As the Electromagnetic Environmental Effects (E3) Engineer Senior you will be responsible for leading requirements development, tracking, and verification testing of systems, and overseeing electromagnetic compatibility testing of developmental and deployable systems on flight‑test fighter platforms. Your responsibilities will include: Lead requirements development, tracking, and verification testing for system‑level projects. Conduct platform‑level Electromagnetic Compatibility (EMC) testing and develop test procedures for flight‑test modifications. Perform RF and antenna analysis, including COSITE assessments, antenna radome performance, and RF/fiber‑optic cabling evaluations. Oversee electromagnetic radiation hazard (EMRADHAZ) assessments and...

Description: You will be the Electromagnetic Environmental Effects (E3) Engineer Staff, Level 4 for the Aeronautics team which is responsible for advancing cutting‑edge air‑mobility capabilities. What You Will Be Doing As the Electromagnetic Environmental Effects (E3) Engineer Staff, Level 4 you will be responsible for leading requirements development, tracking, and verification testing of systems, as well as driving integration of developmental and deployable payloads onto air mobility platforms. Your responsibilities will include: Lead requirements development, tracking, and verification testing for system‑level projects. Conduct Electromagnetic Compatibility (EMC) testing and design flight‑test modification procedures. Perform RF/COSITE analysis, antenna‑radome performance assessments, and RF/fiber‑optic cabling evaluations. Lead key working groups and system/payload trade studies to inform design decisions. Coordinate domestic travel for...

Description: You will be the Harness Design Engineer for the Advanced Development Programs (ADP) team which is responsible for developing cutting‑edge aircraft harness and interconnect solutions. What You Will Be Doing As the Harness Design Engineer you will be responsible for translating electrical specifications into robust wiring harness designs, creating detailed routing diagrams, and ensuring integration across mechanical and structural domains. Your responsibilities will include: Produce electrical wiring schematic drawings and design intricate power distribution systems. Gather and validate specifications, generate routing diagrams, cable layouts, and installation procedures. Coordinate with mechanical, structural, and integration teams to resolve clashes and meet safety and compliance standards. Create and maintain documentation such as routing drawings, installation guides, and change‑request tracking. Develop supplier statements of work, oversee...

Description: You will be the Flight Line Electrician - C130 for the team which is responsible for determining methods, tools, operations, and sequences necessary to rework, check out, and service complex aircraft electrical systems equipment. What You Will Be Doing As the Flight Line Electrician - C130, you will be responsible for mocking up, fabricating, and installing experimental systems and equipment and performing final flight-servicing, troubleshooting, and operational checkout before and after flight to ensure airworthiness and conformance to applicable design specifications. Your responsibilities will include: Conducting power plant runs or working with mechanics in conducting such runs; making adjustments and replacements of electrical components and accessories Investigating any malfunctioning of electrical equipment before and after flight test; analyzing systems and diagnosing trouble Performing necessary operations to correct trouble,...

Description: We are Lockheed Martin We are seeking a highly experienced Principal Project Engineer to lead and manage C130 new development and modernization efforts. You will function as part of the AMMM Project Engineering team responsible for delivering complex system development products and solutions. What You Will Be Doing As a Principal Project Engineer Manager your responsibilities will include: • Be the technical leader solving new development opportunities or modernized solutions of an integrated and complex system/technical development from concept, through design, implementation, test, manufacturing/deployment and sustainment. • Ensure alignment with Engineering and Technology strategy, business development, program architect, technical feasibility. • Drive planning, technical performance measures, trade studies, risk evaluations, across all Engineering Teams to meet contract cost, schedule, and technical requirements. Lead and manage engineering teams to...

Description: You are a dedicated and passionate RF Engineering Associate Manager leading the Aeronautics AMMM Comm/Nav and Surveillance team. This exciting position is with the Combat Systems Department. You will manage, mentor, and guide a team of engineers with diverse backgrounds and encourage innovation and technical leadership across the C-130J, C-5M, and P-3 platforms. As a leader, you will foster personal growth and create inclusive work environments for your highly skilled team. The RF Engineering Associate Manager candidate will have the following responsibilities: - Manages the research, design, development, and testing of a variety of electronic avionics equipment and systems, including radios, antennas, navigation equipment, intercommunication systems, and defensive systems. - Practice effective project management problem resolution and risk management techniques. - Interpretation of customer requirements, creation of system and equipment level requirements, and...