112 electrical engineer jobs found in Orlando

Description: You will be the Senior Signal Integrity / Power Integrity Electrical Engineer responsible for ensuring the electrical performance of high-speed and mixed-signal printed circuit board assemblies across MFC programs. The engineer performs pre- and post-layout SI/PI analysis, defines PCB stack-ups and routing constraints, supports board sign-off, and partners with program design teams as a recognized subject-matter expert. This role contributes to the MFC SI Center of Excellence and helps establish design standards, modeling flows, and best practices that scale across the Circuit Card Design portfolio. What You Will Be Doing You will be responsible for: • Perform pre-layout SI/PI analysis on high-speed interfaces (DDR, PCIe, SerDes, Ethernet, USB) — channel modeling, eye-diagram and jitter budgets, termination strategy. • Define and review PCB stack-ups, controlled-impedance and length-matching rules, and via/breakout strategies in coordination with PCB designers. •...

Description: WHAT WE'RE DOING Rotary and Mission Systems' Training, Logistics and Simulation (TLS) business is Lockheed Martin’s center of excellence for training and logistics products and services, serving the U.S. military and more than 65 international customers around the world. Based in Orlando, TLS develops programs that teach service men and women skills to accomplish their most challenging missions — flying the world’s most advanced fighter aircraft, navigating ships and driving armored vehicles. TLS is the corporation’s hub for simulation, X reality, live-virtual-constructive capabilities, advanced training devices and full-service training programs. TLS also provides sustainment services such as supply chain and logistics IT solutions, spares and repairs, as well as automated test and support equipment. THE WORK As a member of our Electrical Engineering team, you will: • Perform Electrical Engineering development and design functions in support of Automated...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: What We're Doing Join Lockheed Martin's dynamic team working on the cutting edge of aerospace technology. We provide training systems for the world's most advanced aircraft, including the F-35 Joint Strike Fighter. The Work As a member of our Test Program Set Engineering team, you will: • Design, develop and integrate test programs to be executed on Automatic Test Systems • Comprehend electrical designs, including electrical schematics, cable drawings, and supporting electrical documentation • Design Test Program Hardware architecture • Perform failure analysis on electrical systems Who We Are We create unparalleled readiness today and into the future, no matter what the mission may be here at Lockheed Martin Rotary and Mission Systems. Who You Are You can work on a team with other engineers. You can be flexible, motivated, dedicated, detail-focused, team-oriented, and capable of multi-tasking. Why Join Us Our team is dedicated to...

Description: What We're Doing Join Lockheed Martin's dynamic team working on the cutting edge of aerospace technology. We provide training systems for the world's most advanced aircraft, including the F-35 Joint Strike Fighter. The Work As a member of our Test Program Set Engineering team, you will: • Design, develop and integrate test programs to be executed on Automatic Test Systems • Comprehend electrical designs, including electrical schematics, cable drawings, and supporting electrical documentation. • Perform failure analysis on electrical systems. This position will require the selected candidate to have the ability to obtain a Secret level U.S. government security clearance. U.S. citizenship is a requirement for consideration. Who We Are We create unparalleled readiness today and into the future, no matter what the mission may be here at Lockheed Martin Rotary and Mission Systems. Who You Are You can work on a team with other engineers. You can be...

Description: The HWIL Electrical Design & Integration Engineer serves as a senior engineer responsible for the end‑to‑end electrical design, integration, and verification of real‑time, closed‑loop HWIL capabilities. With 3 + years of relevant experience, the engineer works under general direction, leads technical efforts, influences project objectives, and engages senior leadership on critical matters. What You Will Be Doing • Lead Electrical Design: Develop detailed cable harnesses, complex PCB layouts, and component integration strategies for multiple HWIL programs. • Simulation & Modeling: Support HWIL real‑time closed‑loop simulation (including Missile 6‑DOF). • Advanced Troubleshooting: Diagnose and resolve hardware failures, EMI/EMC issues, timing mismatches, and connector problems using lab equipment. • Integration Leadership: Guide the integration team in debugging electrical subsystems, ensuring seamless incorporation of stimulation equipment into the HWIL...

Description: WHAT WE'RE DOING Do you want to be part of the team that provides training systems for the world's most advanced aircraft – F-35 Joint Strike Fighter? Do you enjoy a dynamic, fast-paced work environment? Join Lockheed Martin's dynamic team working on the cutting edge of aerospace technology. We provide training systems for the world's most advanced aircraft, including the F-35 Joint Strike Fighter. THE WORK This position is for a Systems Engineer Senior on the F-35 Physical Maintenance Training Devices (PMTD) Integrated Product Team (IPT) within the Training, Logistics and Simulation (TLS) Integrated Engineering line of business. As a Systems Engineer Senior on our team, you will work with a team of multi-discipline engineers to analyze, design, document, test, and sustain a suite of 5 different training products within the PMTD portfolio. The selected candidate will help lead the definition, development, integration, verification, and validation of complex...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training, Logistics and Simulations (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a Systems Engineer (SE) within Turnkey Training Portfolio on the Singapore Basics Wings Course (BWC) program. We integrate deliverable hardware and deliverable software during production testing in our Orlando facility and then deliver the advanced Training Devices to our customers at their international schoolhouses. We...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training, Logistic and Simulation (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 2 Software Engineer (SWE) within Turnkey Training Portfolio on the Singapore Basics Wings Course (BWC) program. We integrate deliverable hardware and deliverable software during production testing in our Orlando facility and then deliver the advanced Training Devices to our customers at their international...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our solutions are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering solutions that exceed expectations and set new standards for performance and reliability. THE WORK The selected candidate will be responsible for: • Analyzing and interpreting electrical, electromechanical, and cable schematics during development and production stages • Updating and creating assembly work instructions for efficient assembly based on the drawings and/or models • Publishing work instructions to the production floor for use • Identifying and maintaining tool lists...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our solutions are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering solutions that exceed expectations and set new standards for performance and reliability. THE WORK The selected candidate will be responsible for: • Analyzing and interpreting electrical, electromechanical, and cable schematics during development and production stages • Updating and creating assembly work instructions for efficient assembly based on the drawings and/or models • Publishing work instructions to the production floor for use • Identifying and maintaining tool lists...

Description: You will be the Systems Integration Test Engineer Sr for the Orlando IRST LSE Depot. Our team keeps the infrared search and track (IRST) line replaceable sub assemblies (WRAs) flying ready by maintaining, repairing, and continually improving depot processes, wiring diagrams, test equipment, and software tools. What You Will Be Doing As the Systems Integration Test Engineer Sr you will serve as the technical leader who partners with cross disciplinary engineers to troubleshoot, diagnose, and repair IRST WRAs. You’ll own the end to end test and sustainment effort for hardware returning to the customer, working on the D Shift/weekend 4/10 schedule. Your responsibilities will include: • Analyzing wiring diagrams, test data, and depot procedures to isolate and resolve hardware faults. • Operating and calibrating electro optical test equipment for component and sub assembly verification. • Developing and executing test plans that meet product and customer...

Description: You will be the Operations Engineer Sr Staff for the Engineering Manufacturing and Development (EMD) team. Our team is responsible for supporting production site transitions to full‑rate production, including proposals, analysis, facility layouts, span‑time reduction, and ramp‑up activities. What You Will Be Doing As the Operations Engineer Sr Staff you will be responsible for technical guidance, project ownership, and ensuring EMD projects meet cost, schedule, and quality targets while leading a cross‑functional team. Your responsibilities will include, but are not limited to: Lead cross‑functional meetings and identify opportunities for cost and product improvements. Develop and manage program schedule, manpower planning, and hardware support. Execute capital projects and long‑range planning initiatives. Manage cost accounts and apply earned‑value management techniques. Process procurement demand through SAP and author program...

Description: Seeking an FPGA Design Engineer to support RF Sensor Stimulation Hardware-in-the-Loop (HWIL) capabilities. FPGA Engineer to oversee the design, development and implementation of Radio Frequency (RF) signal modulation capabilities in FPGAs. Tasks for this position will include the definition of FPGA architecture, development of VHDL firmware and development of interfaces to ancillary HWIL HW. Also responsible for the integration, test, verification and validation of multiple subsystems. Basic Qualifications: • 8+ years of experience developing FPGA Programmable Logic • Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education • HDL programming experience with VHDL, Verilog, and/or System Verilog • Experience on Hardware-Software Integration and Validation • Familiarity with FPGA toolsets (Vivado, Libero, and/or Quartus strongly preferred) • Experience with electronics design...

Description: You will be the Manufacturing Engineer Associate Manager for the ARRW Production Manufacturing Engineering team. Our team is responsible for providing support to day‑to‑day activities across different sites to ensure quality, cost, and schedule goals are met. What You Will Be Doing As the Manufacturing Engineer Associate Manager you will be responsible for leading the ARRW Production Manufacturing Engineering team and ensuring program objectives are met. Your responsibilities will include, but are not limited to: Lead the ARRW Production Manufacturing Engineering team, coordinating with Program Managers, IPT/IST Leads, Chief Engineers, suppliers, and the customer. Develop and mentor Level 1‑5 individual contributors, fostering technical growth and career progression. Drive improvements in cost, schedule, quality, and safety across the missile production line. Communicate risks and program status to functional leaders, ensuring alignment...

Description: You will be the Electromechanical Design Engineer for the Common Command Flight Termination System (FTS) team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ESAF (Electronic Safe and Arm Fuze) packaging that will serve as the common ESAF backbone for every new FTS. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ESAF • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials,...

Description: **3/12A work schedule-Thursday (4 hours) Friday through Sunday (12 hours)** You will be the Test Engineer for the Microelectronics team. Our team is responsible for designing, executing, and analyzing automated tests for microelectronics parts and assemblies to verify digital, electro optical, and RF performance. What You Will Be Doing As the Test Engineer you will be responsible for applying your expertise in test methodology, schematic analysis, and automated test development to ensure microelectronics components meet stringent performance requirements. Your responsibilities will include, but are not limited to: Develop and execute automated test procedures for microelectronics components. Analyze test data to identify performance issues and recommend corrective actions. Create and maintain test documentation, schematics, and test setups. Collaborate with cross functional engineers to troubleshoot and resolve hardware failures. Support continuous improvement of...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training, Logistic and Simulation (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 2 Systems Integration/Test Engineer (SI/TE) within Production Operations for the F-16 product line of flight simulators, including the Full Mission Trainers (FMT), and various testbed devices for software development. We integrate deliverable hardware and deliverable software during production testing in our...

Description: Lockheed Martin has an exciting opportunity for a Thermal Analysis Mechanical Engineer in Orlando, FL. This person will be a member of the Mechanical Analysis team and be responsible for the development of thermal analysis for mechanical, structural, optical, thermal, and electronic systems and assemblies. Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. MFC is a recognized designer, developer, and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries. MFC develops, manufactures, and supports advanced products for military customers that include the U.S. Army, Navy, Air Force, Marine Corps, NASA, and...