21 senior field engineer jobs found in Orlando

Description: You will be the Circuit Card Design Engineer for the Hardware Engineering team at Lockheed Martin Missiles and Fire Control (MFC). Our team designs, develops and fields precision engagement aerospace and defense systems, delivering high reliability circuit card assemblies (CCAs) that power missiles, sensors and other mission critical subsystems. What You Will Be Doing As the Circuit Card Design Engineer you will own the end to end creation of CCAs—from architecture and schematic capture through EPCAD layout, prototype build up and test. You will partner with systems, electromechanical, firmware/software and manufacturing groups to ensure every design meets performance, environmental and security requirements while keeping the program on schedule. Your responsibilities will include • Lead architecture, schematic capture and EPCAD layout for CCAs supporting missile and sensor subsystems. • Define, refine and document system, performance, interface and environmental...

Description: You will be the Senior Sustainment Engineer supporting life cycle cost estimating, affordability analysis, and sustainment strategy development. Our team is responsible for ensuring systems remain affordable, supportable, and operationally effective throughout their entire lifecycle by developing logistics solutions, evaluating sustainment costs, and identifying opportunities to improve long-term support outcomes. What You Will Be Doing As the Senior Sustainment Engineer, you will serve as the sustainment, life cycle cost, operations and support, and affordability engineer responsible for supporting the development and execution of sustainment and logistics support strategies. You’ll play a critical role in evaluating the affordability and effectiveness of system support solutions from development through fielding, operations, maintenance, and long-term depot sustainment. Your responsibilities will include: • Performing logistics analysis, including level of repair...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the ElectroMechanical Design Engineer for the Missiles & Fire Control (MFC) Electromechanical Engineering organization. Our team delivers the high reliability hardware that powers precision engagement systems for the United States and allied militaries, and we set the technical direction for electromechanical solutions across the MFC portfolio. What You Will Be Doing As the ElectroMechanical Design Engineer you will act as the recognized subject matter expert and technical authority, guiding both the hardware architecture and the integrated product teams (IPTs) that bring those designs to life. Your responsibilities will include: • Leading IPTs and serving as the primary technical liaison for customers, ensuring clear communication of requirements, risks, and status. • Architecting, designing, and validating advanced circuit card packages that support ASICs, System on Chip (SoC), and Multi Chip Package (MCP) solutions. • Creating high density...

Description: You will be the Electromechanical Engineer for the Hardware Engineering team within Missiles & Fire Control (MFC). Our team delivers the high reliability electronic packaging, harnesses, and enclosures that power missile and radar systems for the United States and allied militaries. What You Will Be Doing As the ElectroMechanical Engineer you will own the end to end development and production of electromechanical hardware on one or more defense programs. You’ll lead cross functional teams, mentor junior engineers, and ensure every design meets strict size, weight, power, and environmental requirements. Your responsibilities will include: • Leading hardware development and production efforts, driving schedules, quality, and cost targets. • Designing CCA/PWB packages, harness assemblies, and electronic enclosures; creating detailed 3 D models, 2 D drawings, and layout documents in Windchill/CREO. • Selecting materials, components, and manufacturing processes...

Description: You will be the Project Engineer for the Spike NLOS & M LRPSM Sustainment Team. Our team keeps the Spike NLOS system mission ready in the field and drives the execution of the M LRPSM prototype, delivering sustainment, technical support, and continuous improvement for these critical programs. What You Will Be Doing As the Project Engineer you will be the go to technical lead for sustainment activities, coordinating hardware logistics, risk mitigation, and performance tracking while working side by side with the LSE, USG, and cross functional partners. You’ll help shape proposals, manage budgets, and present status updates to senior leadership. Your responsibilities will include: • Providing rapid, expert guidance to the LSE team (both CONUS and OCONUS) on sustainment questions and challenges. • Overseeing hardware shipments, repair coordination, and supplier relationships to ensure field ready equipment. • Tracking contractual requirements, monitoring...

Description: You will be the Senior Supplier Quality Engineer (SQE) for the Air‑Launched Rapid Response Weapon (ARRW) team. Our team is responsible for ensuring quality standards are met throughout the development process, from design to production, by collaborating with Engineering, Manufacturing, and suppliers. What You Will Be Doing As the Senior Supplier Quality Engineer (SQE) you will be responsible for driving supplier quality excellence across the ARRW program. Your responsibilities will include, but are not limited to: Develop and lead supplier quality plans and requirements. Conduct supplier audits, assessments, and performance monitoring. Lead root‑cause investigations and corrective‑action initiatives. Partner with engineering and manufacturing to resolve quality issues. Track, analyze, and report quality metrics throughout the product lifecycle. Why Join Us The ideal candidate is a collaborative problem‑solver with extensive...

Description: You will be a Systems Integration and Test Senior Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems for Platform Expansion (PEX). What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. Advanced Programs is seeking an Electro-Optical (EO) Engineer who is passionate about EO and can apply technical skills to develop optimized solutions for complex challenges. What You Will Be Doing Your skill set should include physics-based modeling, FLIR characterizations, image processing and/or algorithm development. The EO Engineer must understand the sensitivities associated with the various parts of the imaging chain to quickly and effectively perform system design trades. Must be willing to increase technical depth and breadth in EO as a path...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: Seeking an FPGA Design Engineer to support RF Sensor Stimulation Hardware-in-the-Loop (HWIL) capabilities. FPGA Engineer to oversee the design, development and implementation of Radio Frequency (RF) signal modulation capabilities in FPGAs. Tasks for this position will include the definition of FPGA architecture, development of VHDL firmware and development of interfaces to ancillary HWIL HW. Also responsible for the integration, test, verification and validation of multiple subsystems. Basic Qualifications: • 8+ years of experience developing FPGA Programmable Logic • Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education • HDL programming experience with VHDL, Verilog, and/or System Verilog • Experience on Hardware-Software Integration and Validation • Familiarity with FPGA toolsets (Vivado, Libero, and/or Quartus strongly preferred) • Experience with electronics design...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: You will be the Production IPT Lead – IRST for the Sensors & Global Sustainment team. Our group drives the design, development, and fielding of cutting edge infrared search and track systems, delivering reliable, high performance hardware to the warfighter. What You Will Be Doing As the Production IPT Lead you will own end to end execution of the IRST program’s infrared receiver (IRR) line, from concept through sustained production. You’ll steer a cross functional team, serve as the technical conscience of the effort, and partner with customers, suppliers, and internal design groups to keep cost, schedule, and performance on target. Your responsibilities will include: • Lead program execution: develop ROMs, respond to new business opportunities, and manage inter program coordination for legacy IRST assets (Legion Pod, Legion ES, Navy Blk II). • Direct recruitment, training, performance assessments, and career development for the IRR engineering crew. • Own...

Description: Lockheed Martin Missiles and Fire control is looking for an experienced mechanical engineering to support the SNIPER sensor program. As a Mechanical Engineer, you will be responsible for the creation, coordination, and release of mechanical design artifacts that feed into the Sniper Program. You will work side by side with other engineers, production planners, and the global supply chain to address production delays, yield issues and failure investigations to support the continued success of the program. Your responsibilities will include: • Generate complete, release ready engineering documents (drawings, BOMs, assembly parts lists) for fabrication and procurement. • Perform tolerance stack up and fit analyses to ensure manufacturability and reliability of mechanical components. • Conduct design reviews, incorporate feedback, and secure formal engineering release approvals. • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...