151 integration and test engineer jobs found in Orlando

Description: You will be the System Integration and Test Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the I&T Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Assessing verification approach to system requirements • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support integration efforts of new designs or design changes Why Join Us We're looking for a highly adaptable and motivated engineers to join our team. If you...

Description: You will be a Systems Integration and Test Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems. What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns or upgrades to the existing missile...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to...

Description: You will be the Electromechanical Design Engineer for the Ignition Safety device (ISD) for the PrSM team. Our team leads the IRAD and ModSTAR initiatives that create reusable, high reliability hardware for flight termination applications across all future Lockheed Martin missile programs. What You Will Be Doing As the Electromechanical Design Engineer you will be responsible for designing the ISD (Ignition Safety device) packaging that will serve as the common ISD backbone for PrSM. You will work hand in hand with electrical, mechanical and systems engineers to turn performance requirements into a manufacturable, flight qualified hardware solution. Your responsibilities will include: • Developing detailed 3 D models, 2 D drawings and electromechanical layouts for the ISD • Selecting materials, components and manufacturing processes that satisfy size, weight, power and environmental constraints. • Creating and maintaining Bills of Materials, obtaining vendor...

Description: You will be the Electromechanical Engineer for the Missiles & Fire Control (MFC) Carrier Card Assembly (CCA) team. Our team creates the mechanical electrical hardware that powers advanced missile systems and supports production line delivery for U.S. and allied defense programs. What You Will Be Doing As the Electromechanical Engineer you will develop innovative electromechanical concepts, generate production ready documentation, and provide hands on support throughout the build to field process. You’ll work independently when needed and collaborate closely with a wide range of specialists to keep designs on schedule and compliant. Your responsibilities will include: • Designing and detailing electromechanical systems and CCA components, including material, component, and process selection. • Creating 3 D layouts, 2 D drawings, and all required engineering deliverables in Windchill. • Coordinating with structural, thermal, configuration management,...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 3 System Integration/Test Engineer (SI/TE) within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) product line of flight simulators, including the Full Mission Simulator (FMS), the Modified Mission Rehearsal Trainer (MMRT), the Deployable Mission Rehearsal Trainer (DMRT), and various...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 2 Systems Integration/Test Engineer (SI/TE) within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) product line of flight simulators, including the Full Mission Simulator (FMS), the Modified Mission Rehearsal Trainer (MMRT), the Deployable Mission Rehearsal Trainer (DMRT), and various...

Description: You will be a Systems Integration and Test Senior Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems for Platform Expansion (PEX). What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK This position is for a level 4 Software Integration Lead on the System Integration/Test Engineer (SI/TE) team within Production Operations for the F-35 Joint Strike Fighter Pilot Training Device (PTD) product line of flight simulators, including the Full Mission Simulator (FMS), the Modified Mission Rehearsal Trainer (MMRT), the Deployable Mission...

Description: Seeking an IT&E RF Engineer to join our Hardware-in-the-Loop (HWIL) Center of Excellence (COE) team in Orlando. The successful candidate will be responsible for designing, calibrating, troubleshooting, operating and maintaining advanced RF HWIL systems, subsystems, and components. Additionally, they will design RF circuits, perform signal integrity measurements, analyze real-time simulation output, and manage the repair and replacement of RF subsystem components. What You Will Be Doing • Operate, calibrate, troubleshoot and maintain advanced RF Hardware-in-the-Loop (HWIL) systems, subsystems and components (couplers, attenuators, phase shifters, mixers, filters, isolators, et al.) • Design RF circuits including Upconverters, Downconverters, Local Oscillator Distribution Networks, et al. • Perform signal integrity measurements using Network Analyzers, Spectrum Analyzers, and Oscilloscopes • Analyze real-time, closed-loop HWIL simulation output and troubleshoot...

Description: You will be a Hardware-in-the-Loop (HWIL) Engineer at Lockheed Martin, responsible for supporting the design, development, and implementation of real-time, closed-loop HWIL capabilities on multiple programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in overseeing the HWIL integration and testing process. What You Will Be Doing As a HWIL Engineer, you will be responsible for: • Overseeing the design, development, and implementation of real-time, closed-loop HWIL capabilities • Supporting program meetings, providing project status, and interfacing with a multi-discipline team • Designing, developing, and testing air vehicle software, firmware, and hardware, and integrating stimulation equipment into the HWIL facility • Debugging software, hardware, connectors, timing, and designs as part of the integration team • Integrating, testing, verifying, and validating the system and various subsystems • Using lab equipment to...

Description: What We’re Doing We’re advancing the cybersecurity posture of the F-35 Pilot Training Devices (PTD) — critical systems that ensure pilots are prepared for mission success. Our cyber team protects the integrity, availability, and confidentiality of these networked systems, embedding security throughout the DevOps lifecycle using the Department of Defense (DoD) Risk Management Framework (RMF). The Work As a Cyber Software Engineer, you’ll drive secure development and continuous monitoring across PTD systems. You’ll apply automation to compliance and remediation, and champion the integration of cybersecurity into every development phase. Key Responsibilities: • Manage system integrity, availability, and cyber compliance for PTD hardware, firmware, and software. • Maintain and update RMF documentation (e.g. System Security Plan, Plan of Action & Milestones, Security Assessment Report). • Execute RMF steps — implement, assess, authorize, and monitor...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the FPGA Design Engineer Lead for the Programmable Logic Design organization within Missiles & Fire Control (MFC). Our team defines the digital backbone of precision engagement aerospace and defense systems for the United States and allied militaries, delivering high performance FPGA/ASIC solutions that meet rigorous aerospace standards. What You Will Be Doing As the FPGA Design Engineer Lead you will act as the recognized technical authority for FPGA and ASIC development across the MFC portfolio. You’ll translate system requirements into production ready architectures, mentor engineers, and steer the strategic direction of programmable logic capabilities. Your responsibilities will include: • Owning end to end development of sophisticated FPGA/ASIC architectures—from capture of requirements through production release. • Defining, designing, verifying, and implementing logic using VHDL/Verilog in AMD Vivado, Intel Quartus, or equivalent...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. Advanced Programs is seeking an Electro-Optical (EO) Engineer who is passionate about EO and can apply technical skills to develop optimized solutions for complex challenges. What You Will Be Doing Your skill set should include physics-based modeling, FLIR characterizations, image processing and/or algorithm development. The EO Engineer must understand the sensitivities associated with the various parts of the imaging chain to quickly and effectively perform system design trades. Must be willing to increase technical depth and breadth in EO as a path...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel development and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. At Lockheed Martin, we place an emphasis on empowering our...

Description: You will be the Systems and Software Quality Engineer for the Quality Engineering team. Our team is responsible for developing and maintaining Systems and Software Quality Engineering processes aligned with AS9100, program, and customer requirements. What You Will Be Doing As the Systems and Software Quality Engineer you will be responsible for shaping and executing quality practices that ensure our software products meet the highest standards of reliability and compliance. Your responsibilities will include, but are not limited to: Develop, modify, and apply quality principles to software and software‑based systems. Design and implement software development and maintenance processes. Define audit strategies to ensure compliance with systems/software processes. Design, specify, and conduct test methods for inspection, verification, and validation. Evaluate and analyze software quality systems to identify and correct deficiencies....

Description: Seeking an IT&E HWIL Engineer to support the design, development and implementation of real-time, closed-loop HWIL capabilities. The ideal candidate is an Engineer with experience with HWIL integration in a testing environment. What You Will Be Doing The candidate must have knowledge in the areas of digital, analog, and electronic components. The candidate must be capable of using lab equipment to troubleshoot hardware/software failures in support of HWIL integration and testing. The candidate will also support program meetings, provide project status, and interface with a multi-discipline team. The HWIL Engineer will be involved in the design, development and testing of air vehicle SW, FW and HW and the integration of stimulation equipment into the HWIL facility. The HWIL Engineer will support the integration team in debugging software, hardware, connectors, timing, and designs. The HWIL Engineer will also be involved in the integration, test, verification...