51 electronics jobs found in Orlando

Description: You will be the Circuit Card Design Engineer for the Missiles & Fire Control (MFC) Small Form Factor Missile team. Our team develops cutting edge processor boards, interface cards and supporting hardware for next generation missiles that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will own the architecture, requirements development and trade study effort for missile electronic subsystems. You will work hand in hand with cross functional teams to translate system needs into robust circuit card designs that enable reliable, high performance missile operation. Your responsibilities will include: • Supporting the development of system architectures, including block diagrams, interface control documents and other architectural artifacts for missile subsystems. • Developing and refining performance, interface and environmental requirements for circuit card designs. • Conducting...

Description: You will be a FPGA Design & Verification Engineer at Lockheed Martin, responsible for designing, simulating, and integrating Field-Programmable Gate Arrays (FPGAs). Our team is looking for a talented engineer to join our team and support the development of cutting-edge technologies. What You Will Be Doing As the FPGA Engineer you will perform requirements capture, design architecture, implementation, simulation, integration, and troubleshooting for the datalink FPGA designs that are being used to support a new capability. Your responsibilities will include: • Capturing and deriving requirements for FPGA designs • incorporate new crypto architecture leveraging existing NSA algorithms interfacing with data link radio module • RF waveform implementation and incorporation of Simulink/HDL Coder into FPGA design and low-speed messaging and communication with external peripherals • Working with Xilinx/AMD or Microchip FPGA to development solution for Complex...

Description: What You Will Be Doing As an ETM, you will be responsible for: • Leading monthly team meetings, quarterly check-ins for career development, annual performance reviews, training plan maintenance, and program-specific mentorship • Assessing IT&E staff planning, inputting new requisitions, and aligning staff to meet dynamic critical needs • Developing missile processing procedures and schedules • Performing as an asset manager for the missile from initial builds to integration, then ground and flight tests • Guiding the team in leading the integration, testing, and evaluation of systems, including generating test plans and procedures, preparing test readiness review packages, and executing development/qualification testing • Supporting subcomponent and subassembly integration, the build of subassembly hardware, and the buildup, integration, verification, and validation of test equipment • Supporting the preparation and conduct of Test Readiness Reviews (TRR) and...

Description: You will be the Circuit Card Design Engineer for the Missiles & Fire Control (MFC) Small Form Factor Missile team. Our team develops cutting edge processor boards, interface cards and supporting hardware for next generation missiles that must meet extreme size, weight, power and performance requirements. What You Will Be Doing As the Circuit Card Design Engineer you will own the architecture, requirements development and trade study effort for missile electronic subsystems. You will work hand in hand with cross functional teams to translate system needs into robust circuit card designs that enable reliable, high performance missile operation. Your responsibilities will include: • Supporting the development of system architectures, including block diagrams, interface control documents and other architectural artifacts for missile subsystems. • Developing and refining performance, interface and environmental requirements for circuit card designs. • Conducting...

Description: This position is for the Chief Engineer Manager – Cyber Security & Emerging Technologies (CSET) in the SP AP program area. The role reports to the SP AP Chief Engineer and leads a high impact, cross functional team delivering affordable, secure, future ready solutions in advanced cyber, electromagnetic (EM) warfare, 5G/6G radio frequency (RF), and micro electronics. The successful candidate will work closely with the entire Advanced Programs staff to ensure synergy across teams and to lead/participate in lessons learned communication What You Will Be Doing • Provide technical leadership for the CSET portfolio, setting direction, priorities, and performance targets. • Drive the capture and white paper process, translating emerging technology opportunities into competitive proposals that satisfy RFP requirements. • Own technical risk management, trade off analysis, and affordability metrics, establishing mitigation plans and continuous improvement indicators. •...

Description: The Advanced Threat Warning Systems (ATWS) Tactical InfraRed Search and Track (TacIRST) Development Chief Engineer provides technical leadership for emerging infrared threat warning technologies across a portfolio of customers, use cases, and operational domains. Reporting to the ATWS program area Chief Engineer, you will partner with program the USG customer base. You will work with the Advanced Programs Special Programs (AP/SP) organization to keep product development pipelines running smoothly. In addition, you will coordinate the AP/SP threat warning technology roadmap, oversee vehicle base kit integrations, and drive international threat warning pursuits. What You Will Be Doing • Providing technical leadership for the ATWS development portfolio. • Coordinating cross discipline IPTs to align schedules, interfaces, and milestones. • Driving technical risk management, trade off, and affordability decisions. • Partnering with USG customer and internal stakeholders...

Description: You will be the Analog Electrical Engineer Staff for the Lockheed Martin Missiles and Fire Control (MFC) JASSM Analog & Power Team. Our team is responsible for designing, analyzing, and supporting the analog and power circuits that power the Joint Air to Surface Standoff Missile (JASSM) family. We drive reliability across production, troubleshoot hardware issues, and partner with suppliers to ensure every circuit meets mission critical performance. What You Will Be Doing As the Analog Electrical Engineer Staff you will be the program liaison for multiple subcontractor suppliers, as well as serving as the technical subject matter expert for all JASSM analog and power circuits. You’ll work in a fast paced production environment, providing rapid, accurate solutions to hardware challenges while collaborating across engineering, test, and manufacturing groups. Your responsibilities will include: • Serve as program liaison by traveling to suppliers to ensure...

Description: ​ You will be the Electro Mechanical Design Engineer for the Orlando Test Engineering & Production team. Our team delivers rugged electromechanical packaging for avionics cards, cable assemblies and supporting structures, providing the hardware that enables both test bed validation and high rate production of mission critical systems. What You Will Be Doing As the Electro Mechanical Design Engineer you will be responsible for creating and documenting hardware designs that meet strict performance, reliability and safety requirements. You will work on complex packaging solutions, support integration of subsystems in the lab, and collaborate with cross functional groups to turn concepts into buildable hardware. Your responsibilities will include: • Developing detailed electromechanical designs for avionics cards, cable harnesses and mechanical support structures. • Producing complete release packages: 3 D models, 2 D drawings, bill of materials and design...

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK • We are seeking a dedicated Systems Installation and Maintenance Technician to join our team. This role involves a range of tasks related to the installation, setup, and maintenance of complex systems and equipment. The ideal candidate will have a strong background in electrical and mechanical systems, with hands-on experience in installation,...

Description: You will be an FPGA Design Engineer for Lockheed Martin’s Missile and Fire Control team. Our group designs, simulates, and integrates cutting edge defense systems that keep our warfighters ahead of emerging threats. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA solutions that power both existing and next generation defense systems. Your responsibilities will include: - Develop complex FPGA designs, including specification, design, verification, and implementation -Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements -Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements -Collaborate with the team through the Design Architecture development process Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset,...

Description: You will be an FPGA Design Engineer for Lockheed Martin’s Missile and Fire Control team. Our group designs, simulates, and integrates cutting edge defense systems that keep our warfighters ahead of emerging threats. What You Will Be Doing As the FPGA Design Engineer you will develop FPGA solutions that power both existing and next generation defense systems. Your responsibilities will include: - Develop complex FPGA designs, including specification, design, verification, and implementation -Develop trade studies to select an FPGA solution optimized for device utilization, power and thermal requirements -Collaborate with cross-functional teams, including software, hardware, and systems engineering to develop an optimal architecture and develop FPGA requirements -Collaborate with the team through the Design Architecture development process Why Join Us Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset,...

Description: You will be the ElectroMechanical Design Engineer for the Advanced Electronics Packaging team at Lockheed Martin Missiles & Fire Control. Our team pioneers 2 D/3 D heterogeneous packaging concepts, integrating thin film, semiconductor and high performance thermal management technologies to create next generation electronic systems for aerospace and defense missions. What You Will Be Doing As the ElectroMechanical Design Engineer you will design, prototype and test cutting edge packaging solutions while collaborating with electrical, systems, test and product design engineers. You will work side by side with Lockheed Martin’s senior Advanced Packaging SME, gaining hands on experience with emerging semiconductor manufacturing processes and translating them into flight qualified hardware. Your responsibilities will include: • Conceiving and modeling 2 D/3 D heterogeneous package architectures that meet size, weight, power and reliability targets. • Developing...

Description: What We're Doing Rotary and Mission Systems' Training, Logistics and Simulation (TLS) business is Lockheed Martin’s center of excellence for training and logistics products and services, serving the U.S. military and more than 65 international customers around the world. Based in Orlando, TLS develops programs that teach service men and women skills to accomplish their most challenging missions — flying the world’s most advanced fighter aircraft, navigating ships and driving armored vehicles. TLS is the corporation’s hub for simulation, X reality, live-virtual-constructive capabilities, advanced training devices and full-service training programs. TLS also provides sustainment services such as supply chain and logistics IT solutions, spares and repairs, as well as automated test and support equipment. THE WORK This is a position for a Software Engineering Lead on F35 Pilot Training Devices (PTD). As a Staff Software Engineer for the PTD team, you will: • Be...

Description: You will be a Systems Integration and Test Engineer for Lockheed Martin's Missiles & Fire Control division. Our team is responsible executing Lab, Ground, and Flight testing to ensure successful development and deployment of critical systems. What You Will Be Doing As the IT&E Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide engineering evaluations of redesigns or upgrades to the existing missile...

Description: You will be the Electro Mechanical Design Engineer for the Advanced Programs team at Lockheed Martin Missiles & Fire Control in Orlando, FL. Our team designs, develops and integrates flight worthy military electronics—processor modules, interface cards, power boards and flex assemblies—into high performance missiles and aerospace systems, often under extreme space, thermal and size constraints. What You Will Be Doing As the Electro Mechanical Design Engineer you will lead the hardware development effort for these complex electronic assemblies, coordinating cross functional teams to take concepts from initial design through integration, test and production. You will apply high density packaging expertise, mentor junior engineers and ensure the hardware meets every mission and safety requirement. Your responsibilities will include: • Developing detailed electromechanical designs for close proximity circuit cards, cable assemblies and mechanical support...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh environments. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for Advanced Programs. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple rigidflex circuit card assemblies • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and collaborating with EPCAD to create layout and signal routing...

Description: You will be the System Integration, Test, and Evaluation (IT&E) Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the IT&E Engineer, you will be responsible for working in the laboratory onsite: • Generating and executing sub-system and system level integration and test plans/procedures • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support Failure investigations and resolution of hardware, software and test equipment anomalies that have occurred during system and subsystem testing • Provide...

Description: You will be the Senior Electromechanical Engineer for the Air Dominance Electromechanical Engineering team in Orlando, Florida. Our team is responsible for designing, integrating and qualifying complex electromechanical packages—electronics cards, cable harnesses and supporting structures—that enable both test bed hardware and production line systems for advanced air dominance platforms. What You Will Be Doing As the Senior Electromechanical Engineer you will lead the creation of high performance hardware solutions, drive design assurance activities, and support integration of subsystems into the laboratory environment. You will serve as the technical bridge between design, program management and the customer, ensuring that every package meets stringent performance, safety and schedule requirements. Your responsibilities will include: • Developing detailed electromechanical designs for avionics cards, cable assemblies and mechanical support structures. •...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...

Description: You will be the Integration, Test, and Evaluation Engineer for our team, responsible for leading the integration, testing, and evaluation of complex systems. Our team is responsible for ensuring that integrated hardware meets physical, functional, and performance objectives. What You Will Be Doing As the Integration, Test, and Evaluation Engineer, you will be responsible for generating test procedures and plans, preparing test readiness review packages, integrating a development effort, and executing qualification testing. You will also write qualification test reports and support subcomponent and subassembly integration, as well as the build of subassembly hardware and test equipment. Your responsibilities will include: • Generating test procedures and plans • Preparing test readiness review packages • Executing qualification testing • Writing qualification test reports • Supporting subcomponent and subassembly integration • Supporting the build of subassembly...