111 electronics jobs found in Orlando

Description: WHAT WE’RE DOING We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability. THE WORK - Perform preventive‑maintenance inspections, functional tests, and calibrations; diagnose faults using schematics, service manuals, and ECOs (Engineering Change Order); replace/repair boards, modules, connectors, and firmware. - Disassemble, inspect, and repair COLT test kits (signal generators, load banks, adapters); re‑term or replace internal...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Command Launch Assembly (CLA) FPGA team within Missiles & Fire Control (MFC). Our team delivers the digital heart beat that powers the Next Generation Short Range Interceptor (NGSRI), turning system level performance and safety goals into reliable, production ready FPGA hardware for the United States and allied forces. What You Will Be Doing As the senior ASIC & FPGA designer you will own the full lifecycle of the CLA FPGA—from high level architecture through release ready documentation—while mentoring junior talent and partnering with a broad set of cross functional experts. Your responsibilities will include: • Defining FPGA architecture and drafting design specifications; writing clean RTL in VHDL/Verilog/SystemVerilog that satisfies performance, power, and reliability targets. • Developing synthesis, place and route, and timing closure strategies to guarantee deterministic operation on the...

Description: You will be the FPGA Design Engineer Lead for the Programmable Logic Design organization within Missiles & Fire Control (MFC). Our team defines the digital backbone of precision engagement aerospace and defense systems for the United States and allied militaries, delivering high performance FPGA/ASIC solutions that meet rigorous aerospace standards. What You Will Be Doing As the FPGA Design Engineer Lead you will act as the recognized technical authority for FPGA and ASIC development across the MFC portfolio. You’ll translate system requirements into production ready architectures, mentor engineers, and steer the strategic direction of programmable logic capabilities. Your responsibilities will include: • Owning end to end development of sophisticated FPGA/ASIC architectures—from capture of requirements through production release. • Defining, designing, verifying, and implementing logic using VHDL/Verilog in AMD Vivado, Intel Quartus, or equivalent...

Description: You will be an Engineering Technology Manager (ETM) for Advanced Programs (AP) at Lockheed Martin Missiles and Fire Control (MFC). Our team is a recognized designer, developer, and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries, and we're seeking a talented leader to join our team. What you Will be Doing As an Engineering Technology Manager (ETM), you will be responsible for leading a team of electrical engineers, driving technical excellence, affordability, and program execution. You will be a technical leader, coach, and mentor, responsible for developing your team's skills and expertise, and ensuring the successful delivery of program requirements. Your responsibilities will include: - Providing technical coaching and mentoring, work assignments, employee career development, and continuous ongoing feedback - Coordinating employee recruitment, selection, and training, performance assessments, salary...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. Advanced Programs is seeking an Electro-Optical (EO) Engineer who is passionate about EO and can apply technical skills to develop optimized solutions for complex challenges. What You Will Be Doing Your skill set should include physics-based modeling, FLIR characterizations, image processing and/or algorithm development. The EO Engineer must understand the sensitivities associated with the various parts of the imaging chain to quickly and effectively perform system design trades. Must be willing to increase technical depth and breadth in EO as a path...

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. At Lockheed Martin, we apply our passion for purposeful innovation to keep people safe and solve the world's most complex challenges. We are seeking an RF Systems Analysis Engineer for Lockheed Martin, supporting RF simulation analysis, antenna test data analysis, and captive flight test performance data analysis. Our team is responsible for ensuring the performance of passive RF sensor systems, and you will play a key role in analyzing and evaluating sensor performance. What You Will Be Doing As the RF Systems Analysis Engineer, you will be responsible for: • Conducting RF requirements analyses and executing trade studies to optimize system performance • Analyzing test data, including signal...

Description: Lockheed Martin Missiles and Fire in Orlando, FL is seeking an experienced Integration, Test, and Evaluation (IT&E) Engineer to support missile and sensor development programs. Our team is dedicated to delivering innovative solutions, and you will play a key role in supporting the test series leading up to flight testing. What You Will Be Doing The selected Integration, Test, and Evaluation (IT&E) Engineer will lead subsystem and system-level integration and testing, use of test equipment during missile processing, and preparation of test related documentation. The candidate will lead a team in the planning and execution of the development, qualification and integration test effort, to include subsystems and missile level activities. This role will also require the candidate to oversee the assembly and test of mockup missiles and live ordnance flight test missiles. The candidate will work under only general direction reporting to a program IT&E Lead....

Description: You will be the Hardware IPT Lead for the TacIRST CLASS system within the ATWS NBAE program. Our team delivers the high performance infrared search and track hardware that powers Lockheed Martin’s missile and fire control portfolio. You’ll lead a cross functional group of precision mechanical designers, electrical engineers, structural and thermal analysts, electromechanical designers, and components and materials specialists to bring the system from concept to production ready hardware. What You Will Be Doing As the IPT Lead you will own the end to end hardware design effort, tracking progress across all disciplines, aligning processor builds with the program schedule, and guiding the transition to a production engineering team that optimizes high rate manufacturing. You will collaborate closely with other engineering domains and program stakeholders to ensure the hardware meets performance, reliability, and cost targets. Your responsibilities will include: •...

Description: Job Description : Lockheed Martin is seeking a Mechanical Engineer Associate in Orlando, FL. You will be the Mechanical Engineering Design supporting development and production of sensors and missile systems. What You Will Be Doing: As the Mechanical Engineering Designer Asc, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: * Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles * Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM * Coordinating with the IPT team, suppliers, GSC, electronic packaging, optics, and...

Description: You will be the Component Engineer for the Hardware Engineering team within Missiles & Fire Control (MFC). Our team safeguards the full lifecycle of critical components—selection, qualification, and obsolescence management—for precision engagement aerospace and defense systems that protect the United States and our allied partners. What You Will Be Doing As the Component Engineer you will serve as the technical authority that drives reliable, cost effective component strategies across one or more defense programs. You’ll partner with suppliers, test houses, and customers while leading cross functional efforts to keep hardware on schedule and compliant. Your responsibilities will include: • Planning, directing, and reviewing project documentation to satisfy contract and company requirements. • Creating and maintaining EEE Component Source Control Drawings (SCDs), evaluating vendors, and analyzing component test reports. • Leading part standardization...

Description: You will be the ARRW Mechanical Design Engineer Staff for the Missiles & Fire Control – ARRW Program. Our team is developing the first hypersonic missile to enter low rate production. What You Will Be Doing As the Mechanical Engineer for the Booster/All Up Round (AUR) you will be the primary mechanical engineering point of contact for ARRW LRIP and ARRW Incremental development. You will work closely with Glider mechanical engineering, AUR electrical engineering, and systems engineering to translate requirements into releasable technical data packages (TDPs). Your responsibilities will include: • Developing and generating CREO layouts and detailed drawings for ICDs, components, sub-assemblies, assemblies, and integration test articles • Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM • Coordinating the IPT team, suppliers, GSC, electronic packaging, optics, and structural/thermal/material analysts to ensure design...

Description: You will be the Senior Circuit Design Engineer for the Command Launch Assembly (CLA) Carrier Card Assembly (CCA) team within Missiles & Fire Control (MFC). Our team delivers the high performance electronic hardware that powers the Next Generation Short Range Interceptor (NGSRI) and other precision engagement systems for the United States and allied forces. What You Will Be Doing As the Senior Circuit Design Engineer you will own the end to end design of the CCA, translating system requirements into reliable, production ready circuit cards that power, communicate with, and integrate into the launcher’s subsystems. You will work hand in hand with mechanical, electrical, and systems engineers, perform verification and validation, and ensure every design meets rigorous power conditioning, signal integrity, and environmental standards. Your responsibilities will include: • Defining performance, power, and interface requirements for the CCA and documenting them in...

Description: You will be the Senior ASIC & FPGA Design Engineer for the Programmable Logic Design team supporting the Next Generation Short Range Interceptor (NGSRI). Our team creates the digital heart beats—ASICs and FPGAs—that enable precision engagement aerospace and defense systems for the United States and allied forces. What You Will Be Doing As the Senior ASIC & FPGA Design Engineer you will own the architecture, development, verification, and delivery of the Datalink FPGA that powers the NGSRI. You’ll translate system level performance, safety, and reliability goals into robust, production ready logic while mentoring junior talent and collaborating across disciplines. Your responsibilities will include: • Defining architecture and design specifications for programmable logic components; writing clean, well documented RTL in VHDL/Verilog/SystemVerilog. • Developing synthesis, place and route, and timing closure strategies to achieve deterministic operation on...

Description: You will be the Circuit Design Engineer Senior for the Laser Weapon System (LWS) Turret Control team. Our team develops the high precision control circuit assemblies that drive the turret closing motor loops for next generation directed energy weapons, ensuring reliable, rapid target acquisition and engagement. What You Will Be Doing As the Circuit Design Engineer Senior you will own the end to end development of the control circuit hardware—from initial concept through detailed design, simulation, verification, fabrication support and system integration. You will work closely with servo specialists, subject matter experts, mechanical packaging engineers and external vendors to deliver a robust, high performance, producible CCA that meets stringent laser weapon requirements. Your responsibilities will include: • Own the full product lifecycle for control circuit assemblies (CCA) • Develop detailed schematics and PCB layouts using industry standard tools. •...

Description: Join our Test Engineering Fabrication team as a Mechanical Fabricator supporting the development and build of mission-critical test equipment. In this hands-on role, you will be responsible for manufacturing, modifying, and assembling mechanical components used in complex electrical test systems that support a variety of defense programs. You will work in a machine shop environment producing custom metal parts and modifying purchased hardware to meet engineering requirements. This role requires the ability to interpret engineering drawings, select appropriate fabrication methods, and execute work with a high level of precision and quality. Work may include machining, drilling, tapping, cutting, fitting, and mechanical assembly of components that integrate into larger test systems. In addition to fabrication, you will support troubleshooting, rework, and continuous improvement efforts. You will collaborate closely with engineers, planners, and electrical fabrication...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: You will be the Senior ElectroMechanical Engineer on the Advanced Programs hardware engineering team within Lockheed Martin Missiles & Fire Control (MFC). Our team designs, develops, and manufactures precision engagement aerospace and defense systems for the U.S. and allied militaries. You’ll work on cutting edge electronics packaging, hands on prototype builds, production support, and technical leadership that directly impact next generation missile and radar programs. What You Will Be Doing As the Senior ElectroMechanical Engineer you will act as a key technical contributor on one or more defense programs, guiding hardware from concept through low rate production and full rate manufacturing. You’ll lead cross functional teams, create detailed electromechanical models and drawings, define test criteria, and drive issue resolution while mentoring junior engineers and championing an inclusive, collaborative culture. Your responsibilities will include: • Lead...

Description: You will be the System Integration and Test Engineer to support a program's system integration and system qualification initiatives in Orlando, FL. Our team is responsible for executing sub-system and system level integration and tests for new and existing products. What You Will Be Doing As the I&T Engineer, you will be responsible for the following: • Generating and executing sub-system and system level integration and test plans/procedures • Assessing verification approach to system requirements • Supporting the preparation of test equipment and facilities required for test events • Supporting Design Verification Tests (DVT) and Qualification tests, including Environmental Stress Screening (ESS), Electromagnetic Interference (EMI), and Functional Acceptance Test Procedures (ATP) for new hardware • Support integration efforts of new designs or design changes Why Join Us We're looking for a highly adaptable and motivated engineers to join our team. If you...

Description: We are seeking a motivated Early Career Production Test Engineer to join our sensors team. This early-career position is ideal for engineers with 1 - 3 years of relevant experience who are passionate about test and integration. You will support the testing of printed circuit board assemblies (PCBAs / CCAs), electronic subsystems, and sensor pod level system testing, helping to maintain efficient production flows while learning best practices in test development and troubleshooting. In this hands-on role, you will work closely with production technicians, senior test engineers, design engineers, and quality teams to identify and resolve issues, improve test processes, and contribute to first-pass yield goals. What You Will Be Doing -Execute and monitor production test processes, including functional testing, boundary scan, environmental stress screening (ESS), and system level verification -Troubleshoot test failures at the board and system level using...

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of excellence and a commitment to delivering advanced capabilities to our customers, we are proud to be at the forefront of cutting-edge technology and engineering. WHAT WE'RE DOING At Lockheed Martin, we're revolutionizing the aerospace and defense sector through groundbreaking technology, advanced manufacturing processes, and a world-class team of professionals. Our mission-driven approach and unwavering dedication to excellence ensure that we continue to deliver superior products and solutions to our customers around the world. THE WORK Candidate will be responsible for maintaining, adjusting, isolating, removing and replacing faulty hardware on full motion Weapons System Trainers (WSTs) and Avionics Desk-Top Trainers (AVDTTs) that support the Combat Rescue...