67 lead test engineer jobs found in Orlando

Description: Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas. We are experiencing growth and seeking to hire a Flying Test Bed Lead Engineer. The Lead Engineer will plan, coordinate, and execute flight‑test campaigns for the RFS PC Flying Test Bed. This role interfaces directly with government ranges, the FAA, and other federal agencies to obtain experimental airworthiness approvals and ensure safe, compliant flight‑test operations. The engineer will lead a multi‑disciplinary working group (5‑10 engineers) and serve as the primary technical liaison to senior leadership, government customers, and external stakeholders. What You Will Be Doing • Develop and...

Description: Missiles and Fire Control in Orlando, Florida an opening for an experience lead test engineer. Our team is responsible for designing, integrating, and ensuring the seamless operation of test systems, and you will play a key role in providing technical support, test equipment improvements, and troubleshooting expertise. What You Will Be Doing As the ATE Test Engineer, you will be responsible for designing test consoles, interface test adapters (ITAs), test cables, and test fixtures. You will be architecting software and writing source code. You will be hands-on integrating the test system hardware, software, and device under test (DUT), then performing verification and validation of the test system. You will work with a range of technologies, including TestStand®, LabVIEW®, Matlab, and C# to control signal generation and measurement tools, conduct Environmental Stress Screening (ESS), and functional testing. Your responsibilities will include: •Designing,...

Basic Qualifications Requires a Bachelor’s degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 10+ years of job-related experience, or a Master's degree plus 8 years of job-related experience. Agile experience preferred.     CLEARANCE REQUIREMENTS: Department of Defense TS/SCI security clearance is required at time of hire.  Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES:   Required 10+ years of experience in software-intensive program leadership, with demonstrated ability to lead large, multi-discipline technical teams Proven track record of delivering complex software programs on schedule...

Description: You will be the Electromagnetic Environmental Effects (E³) Engineer for the LM MFC Advanced Products team. Our team safeguards every system against harsh electromagnetic environments, ensuring that each product not only survives but thrives under the toughest MIL STD 461/464 conditions. What You Will Be Doing As the Electromagnetic Environmental Effects (E³) Engineer you will own the end to end electromagnetic compatibility (EMC/EMI) lifecycle—from early stage concept through full rate production. You’ll work side by side with electrical, mechanical, and electro mechanical peers, translating program needs into robust, test ready designs. Your responsibilities will include: • Designing products that reliably withstand electromagnetic environmental effects. • Defining and shaping program requirements using E³ design guidelines and industry best practices. • Leading the planning, setup, and execution of EMC test events in accordance with MIL STD 461/464, including...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: What We're Doing At Lockheed Martin Rotary Mission Systems, we are at the forefront of innovation, working on exciting programs and developing cutting-edge products and applications to address the complex and evolving needs of our customers. Our team is dedicated to pushing the boundaries of technology and engineering excellence. The Work Lockheed Martin RMS is seeking talented engineers looking to utilize their hardware, software, and test skills by joining our Test Program Set Engineering team. Our team provides technical support for a number of aircraft and weapons systems to maximize operational readiness. Customers are both foreign and domestic and include branches of the US military. As a key member of our Test Program Set (TPS) Engineering Team, responsibilities will include: • Design TPS Hardware (Interface Test Adapters, Cables, Text Fixtures etc.) to interface required for testing hardware on automatic test stations. • Interpret electrical...

Description: You will be the Electrical Engineering Senior for the Air Launched Rapid Response Weapon (ARRW) Low Rate Initial Production (LRIP) team. Our team drives reliability across production, troubleshoots hardware issues, and partners with suppliers to guarantee that every circuit delivers mission critical performance. What You Will Be Doing As the senior electrical engineer you will serve as the technical liaison for the ARRW Vehicle Management Computer (VMC). You’ll thrive in a fast paced production environment, delivering rapid, accurate solutions while collaborating with engineering, test, and manufacturing groups. Travel averages 50 % of your time for a 12 month stint in Los Angeles, CA, giving you exposure to both field and office settings. Your responsibilities will include: • Acting as the primary point of contact for VMC hardware across the LRIP effort. • Performing electrical testing, firmware/FPGA verification, and electro mechanical packaging reviews to keep...

Description: You will be the Mechanical Design Engineer Sr for an Air Dominance development team. Our team is responsible for designing and producing key components of the missile system, including tactical and special test equipment hardware. What You Will Be Doing As the Mechanical Engineering Designer Sr, you will be responsible for supporting the Integrated Product Team in creating detailed designs, layouts, and drawings for various components and subassemblies. You will play a key role in developing and generating CREO layouts, detailed drawings, and design documentation, ensuring seamless collaboration with cross-functional teams. Your responsibilities will include: •Developing and generating CREO layouts and detailed model-based designs (MBD) for ICDs, components, sub-assemblies, assemblies, and integration test articles •Building BOMs, creating parts, assemblies, and design documentation within Windchill PLM •Coordinating with the IPT team, suppliers, GSC,...

Description: You will be the Staff Quality Engineer for the Sniper program. Our team is responsible for delivering high‑quality aerospace solutions. What You Will Be Doing As the Staff Quality Engineer you will be responsible for driving quality excellence across the Sniper program, ensuring that every product meets rigorous standards. Your responsibilities will include, but are not limited to: Review documentation related to manufacturing processes to ensure quality standards. Support Integrated Product Teams with analysis of quality data, yields, rework, and non‑conformance. Lead corrective action meetings, identify trends, and drive resolution. Participate in Material Review Boards and Failure Review Boards to disposition non‑conforming hardware. Conduct assessments and audits to ensure compliance with ISO‑9001/AS9100 and engineering specifications. Why Join Us The ideal candidate is a collaborative engineer who thrives in a fast‑paced...

Description: You will be an Electrical Engineer at Lockheed Martin Missiles and Fire Control (MFC), joining a network of engineering professionals implementing cutting-edge technologies on both existing and new development platforms. Our team is responsible for designing, developing, and manufacturing advanced products for military customers, including the U.S. Army, Navy, Air Force, Marine Corps, NASA, and dozens of foreign allies. What You Will Be Doing As an Electrical Engineer, you will be responsible for ensuring technical excellence, leading tasks to completion, and communicating technical status and issues to internal and external stakeholders. Your responsibilities will include: • Work with the Production Operations team to produce hardware • Ensure technical excellence for assigned tasks • Lead tasks to completion on schedule, budget, and implementation (as applicable) • Communicate technical status and issues to program leadership, technical leadership, and...

Description: You will be the Circuit Card Design Engineer for Lockheed Martin Missile & Fire Control programs. Our team designs, evaluates, and qualifies circuit cards and test hardware that keep mission critical systems operating reliably in harsh, radiation rich environments such as space based platforms. What You Will Be Doing As the Circuit Card Design Engineer you will drive the architecture, schematic capture, and EPCAD layout for complex circuit cards. You will work side by side with cross functional engineers to accelerate design, procurement, and testing while shepherding every design through the Design Assurance process. Your responsibilities will include: • Supporting development of multiple circuit card assemblies for complex systems • Defining, refining, and documenting system, performance, interface, and environmental requirements. • Conducting trade studies to evaluate design options and recommending optimal implementations. • Capturing schematics and...

Description: What You Will Be Doing At Lockheed Martin, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. This requisition is for a Software (SW) Quality Engineer supporting the F-35 line of business for the Lockheed Martin (LM) Aeronautics company in Orlando, FL. This position reports directly to the F-35 Autonomic Logistics Information System / Operational Data Integrated Network (ALIS/ODIN) Senior Quality Manager. The individual must be able to work with only general supervision, be comfortable communicating to all levels of leadership (both internal & external) and have developed SW Quality Engineering skills. This position may require occasional business travel. Responsibilities include (but not limited to): • Facilitate/assist in the...

Description: About the Role: This position is for the Joint Laser Weapon System (JLWS) Beam Director Assembly (BDA) Chief Engineer role in the S&GS-Advanced Programs area. The role will report to the S&GS-AP Chief Engineer programmatically and be expected to work closely with the other members of the S&GS-AP Chief Engineer staff as well as the Advanced Programs and Laser Weapons programs and customer community. What You Will Be Doing: As the JLWS BDA Chief Engineer, you will be responsible for: • Providing technical leadership that enables the team to meet and demonstrate all LWS BDA development and integration milestones on schedule • Developing and nurturing a productive partnership with the other BAs and USG customers • Guiding IPT leads and cross-functional teams in program planning, scheduling, trade studies, design concepts, verification, and critical life cycle reviews • Ensuring program staffing is appropriate from an E&T perspective • Collaborating with...

Description: You will be the Circuit Card Design Engineer for the Missile & Fire Control Advanced Programs at Lockheed Martin. Our team creates cutting edge electro optical/infrared (EO IR) products that deliver critical sensor capability for missile and aerospace platforms. What You Will Be Doing As the Circuit Card Design Engineer you will oversee technical execution, translate system requirements into subsystem designs, and create electrical interface and power distribution architectures. You will work closely with software, hardware and systems engineers, drive Integrated Master Schedule (IMS) tasking, manage procurement and testing, and guide the team through the Design Assurance process. Your responsibilities will include: • Developing detailed schematics, 3 D models and bill of materials for circuit card assemblies (CCAs) that meet size, weight, power and environmental constraints. • Performing signal integrity, power integrity and thermal analyses to validate...

Description: You will be the Senior Reliability Engineer for the Reliability & Test Engineering team. Our team drives product reliability from concept to field, delivering robust designs, rigorous testing, and data driven improvements that keep Lockheed Martin systems flying safely and on schedule What You Will Be Doing As the Senior Reliability Engineer you will own the reliability agenda across the entire product lifecycle. You’ll partner with cross functional engineers, influence technical boards, and turn reliability data into concrete actions that enhance performance, reduce risk, and meet contractual commitments. Your responsibilities will include: • Lead Failure Mode, Effects, and Criticality Analyses (FMECA) and produce reliability block diagrams and quantitative predictions. • Create, execute, and track reliability growth plans; perform growth analysis to ensure program contracts are satisfied. • Support design reviews, test events, and configuration control...

Description: Lockheed Martin (LM) Missiles & Fire Control (MFC) is seeking a Quality Engineer (QE) for a position based out of Orlando, FL. This program is a fast-paced development environment requiring technical acumen and critical thinking. What You Will Be Doing Responsibilities will include, but are not limited to: • Reviews documentation related to internal and external manufacturing processes to ensure quality products are delivered to the customer. • Supports Integrated Product Teams and various production sites with reviews of quality data on failures, yields, rework, scrap, and non-conformance aging. • Ability to analyze and resolve design, manufacturing, and process issues varying from basic to very complex and technically challenging. • Attending program corrective action meetings, identifying trends, assisting in problem resolution and ensuring responsible parties meet requirements and commitments. • Participating in Material Review Boards and Failure Review...

Description: You will be the Senior Mechanical Design Engineer for the RF Product Center – Missile & Fire Control team. Our team designs, develops, and provides production support for high temperature antenna hardware that powers mission critical sensor systems. What You Will Be Doing As the Senior Mechanical Design Engineer you will own the mechanical design effort for RF sensors, working hand in hand with the design lead and cross functional IPTs. You’ll create 3 D CAD models, develop conceptual layouts, run tolerance analyses, and generate production ready drawings for components such as heat sinks, covers, and brackets. You’ll also lead design trade studies and coordinate developmental test (DVT) activities to keep performance, cost, and schedule on target. Your responsibilities will include: • Produce and maintain high quality 3 D CAD models and 2 D drawings for RF sensor mechanical parts. • Perform conceptual design, tolerance stack up, and thermal/mechanical...

Description: You will be the Senior Optical Engineer for the Electro Optical Systems team. Our team designs, develops, and validates cutting edge EO fire control, missile, and laser subsystems for advanced military platforms. We turn visionary concepts into flight ready hardware by integrating optics, mechanics, and electronics into rugged, high performance solutions. What You Will Be Doing As the Senior Optical Engineer you will lead the end to end optical design effort for complex EO weapons. You’ll partner with program managers, subsystem leads, and external partners to translate mission requirements into manufacturable optical architectures, while driving cost effective production and rapid issue resolution. Your responsibilities will include: • Create, analyze, and optimize optical layouts using CodeV (or equivalent) for geometrical and physical optics performance. • Perform tolerance and sensitivity studies, maintaining the system wide optical prescription and updating...

Description: Who we are Lockheed Martin is a global leader in aerospace, defense, and technology solutions. Our Orlando, FL campus is a thriving center of engineering expertise, fostering a culture that encourages creativity, excellence, and the creation of exceptional products. Our team is made up of dedicated professionals who are passionate about pushing the boundaries of what's possible. What We’re Doing At Lockheed Martin, we're at the forefront of cutting-edge technology and innovation. Our campus in Orlando, Florida is a hub for engineering excellence, where we tackle some of the world's most challenging engineering problems. We pride ourselves on our culture of creativity, excellence, and product innovation. https://www.youtube.com/watch?v=ALIarD6TfTU The Work The Maintainability Engineer will focus on the F‑35 aviation simulator fleet and advanced avionics test equipment programs. You will analyze designs, perform reliability‑centered maintenance (RCM) studies,...

Description: Who we are Lockheed Martin is a global leader in aerospace, defense, and technology solutions. Our Orlando, FL campus is a thriving center of engineering expertise, fostering a culture that encourages creativity, excellence, and the creation of exceptional products. Our team is made up of dedicated professionals who are passionate about pushing the boundaries of what's possible. What We’re Doing At Lockheed Martin, we're at the forefront of cutting-edge technology and innovation. Our campus in Orlando, Florida is a hub for engineering excellence, where we tackle some of the world's most challenging engineering problems. https://www.youtube.com/watch?v=ALIarD6TfTU The Work The Systems Engineer provides technical leadership for Department of Defense (DoD) training simulator programs. You will own the end to end RAM and safety architecture, lead hazard and environmental analyses, and direct Integrated Logistics Support (ILS) activities—including supply chain,...